(0)

Questions? Call Us:
866-334-8859

Whirlwind PL-PM1K1
Power Link Meter for New Installations

OUR PART #  PL-PM1K1

Our Price: $1,295.00
List Price: $1,850.00
You save 30%! (Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

The Whirlwind PL-PM1 Power Meter is intended to monitor 3 phase Y power with 3 120 Volt AC legs or single phase with 2 120 Volt AC legs. It is intended to monitor the line side voltage and load current of both portable AC distribution and permanent power distribution systems.

Features:

  • Display Mode Description:
      -  Apply Power.
      -  The power on sequence will illuminate all LEDs on the front panel.
      -  The Software Revision is then displayed in the lower right hand display.
      -  Mode A Voltage (blue LED) and current measurements will display.
  • Mode A Voltage Display (blue LED reference): The TOP row of displays will show (left to right):
      -  X Leg to Neutral voltage
      -  Y Leg to Neutral voltage
      -  Z Leg to Neutral voltage
      -  Safety Ground to Neutral voltage
  • Mode B Voltage Display (red LED reference): The TOP row of displays will show (left to right):
      -  X-Leg to Y-Leg voltage
      -  Y-leg to Z-Leg voltage
      -  Z-Leg to X-Leg voltage
      -  Frequency
  • Amperage Display (mode A and B): The bottom row of displays will always show:
      -  X-Leg current
      -  Y-Leg current
      -  Z-Leg current
      -  Neutral Leg current.
  • Flashing Display Notifications: The Voltage displays will flash when a voltage is out of range.
      -  In Mode A, the X, Y, or Z to Neutral voltage display will flash when the voltage is below 108 Volts or above 131 Volts.
      -  In Mode B, a voltage display will flash when the voltage is less than 187 Volts or greater than 228 Volts.

Whirlwind PL-PM1K1
Power Link Meter for New Installations

OUR PART #  PL-PM1K1

Product Information:

The Whirlwind PL-PM1 Power Meter is intended to monitor 3 phase Y power with 3 120 Volt AC legs or single phase with 2 120 Volt AC legs. It is intended to monitor the line side voltage and load current of both portable AC distribution and permanent power distribution systems.

Features:

  • Display Mode Description:
      -  Apply Power.
      -  The power on sequence will illuminate all LEDs on the front panel.
      -  The Software Revision is then displayed in the lower right hand display.
      -  Mode A Voltage (blue LED) and current measurements will display.
  • Mode A Voltage Display (blue LED reference): The TOP row of displays will show (left to right):
      -  X Leg to Neutral voltage
      -  Y Leg to Neutral voltage
      -  Z Leg to Neutral voltage
      -  Safety Ground to Neutral voltage
  • Mode B Voltage Display (red LED reference): The TOP row of displays will show (left to right):
      -  X-Leg to Y-Leg voltage
      -  Y-leg to Z-Leg voltage
      -  Z-Leg to X-Leg voltage
      -  Frequency
  • Amperage Display (mode A and B): The bottom row of displays will always show:
      -  X-Leg current
      -  Y-Leg current
      -  Z-Leg current
      -  Neutral Leg current.
  • Flashing Display Notifications: The Voltage displays will flash when a voltage is out of range.
      -  In Mode A, the X, Y, or Z to Neutral voltage display will flash when the voltage is below 108 Volts or above 131 Volts.
      -  In Mode B, a voltage display will flash when the voltage is less than 187 Volts or greater than 228 Volts.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.