Earthworks M23MP Matched Pair of M23 Mics

OUR PART #: M23MP

Copied to clipboard

The M23MP is a matched pair of M23MP high definition measurement microphones. ...Read more

Earthworks M23MP Matched Pair Of M23 Mics Image 1
Earthworks M23MP Matched Pair Of M23 Mics
No longer available at Full Compass
We've left this page up for reference only.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Accessories

Product Overview

The M23MP is a matched pair of M23MP high definition measurement microphones.

The M Series has become the accepted standard for affordable, reliable reference and measurement microphones that are accurate in the time domain and frequency response. They are remarkably stable with respect to temperature and atmospheric conditions and are optimized for clean, very fast impulse performance providing accurate wideband response with virtually no handling noise.

Features:

  • Cost effective measurement microphone
  • Improved version of the SMAARTMIC™ previously offered by EAW
  • Ideally suited for acoustical measurements sound system setup andtroubleshooting, room acoustics, or any application where an accuratefree-field measurement microphone is required
  • Omnidirectional polar pattern
  • Flat frequency response, fast impulse response and exceptional polarcharacteristics
  • Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acousticmeasurement systems manufactured by dbx, DEQX and others
  • Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
  • Requires 48V Phantom Power
  • Each M Series microphone is delivered with its own calibration chartproviding its individually measured open-circuit sensitivity and the frequencyresponse curve

Specifications:

  • Frequency Response: 9Hz to 23kHz ±1/-3dB
  • Polar Pattern: Omnidirectional
  • Sensitivity: 30mV/Pa (-30.5dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 142dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 100 Ohms, balanced (50 Ohms ea. pin 2 & 3)
  • Min Output Load: 600 Ohms between pins 2 & 3
  • Noise: 22dB SPL equivalent (A weighted)
  • Dimensions L x D: 165mm x 22mm (6.5 x .860 inches)
  • Weight: .35 lb. (160g)

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Documents

Click to download