Product Overview
The FlexWand™ FW730/HC incorporates a High Definition Microphone™ with a 30kHz high frequency response that enables it to pick up high frequency overtones that conventional microphones miss. In addition, it’s extremely fast impulse response allows it to pick up transients far more accurately. The FlexWand™ has near perfect polar response that will not beam or spotlight and will provide more gain before feedback. Integrated choir miking system with 30kHz cardioid microphone, low profile microphone stand and boom. A near-perfect cardioid polar pattern, with 32dB of rear rejection. A wide coverage area means fewer mics and no spotlighting. Your choir will be heard as one unified voice.
The microphone head can be positioned as high as 7 feet and as low as 1.5 feet from the floor. Plus, the microphone cable plugs into the base of the microphone, making it incredibly low profile and clean.
Includes
- FlexWand™ Stand/Wand Section
- Microphone Windscreen
- Base for Stand
Features
- Uniform frequency response on or off axis
- Frequency response of 30Hz to 30kHz
- Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a great solution for choirs and vocal groups
- Large flex section near the center of the stand that couples the stand and the wand
- Mini-gooseneck between the end of the wand and the microphone head
- Substantial improvement in gain before feedback
- They will handle high sound pressure levels with high rejection of sounds to the rear of the microphone
- Ideal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band ororchestra
- The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
- The sturdy 12 pound cast iron base will not allow the FlexWand™ to be accidentally knocked over
Specifications
- Frequency Response: 20Hz - 30kHz
- Polar Pattern: Hypercardioid
- Sensitivity: 20mV/Pa (-34dBV/Pa)
- Power Requirements: 24-48V Phantom,10mA
- Peak Acoustic Input: 139dB SPL
- Output: XLR-3
- Minimum Output Load: 600Ω, balanced between pins 2 & 3
- Noise: 16dB SPL
- Dimensions
- Stand: 7 ft. 2 in.” long (1.32m),
- Cast Iron Base: 12” (30.48cm) diameter, 1.1” (2.7cm) high;
- Weight
- Stand 2 lbs. (.9 kg)
- Cast Iron Base 12.6 lbs. (5.7kg)