OUR PART # 01995-4804
Specially coated film reflects infrared energy to extend the life of color in super hot lighting fixtures.
When heat is a problem in television, theatre, display or architectural lighting, Thermashield is the answer. Thermashield reduces the adverse effects of heat on performers and products used in commercials. Where hot lamps are used, it helps protect plastic color filters as well as other heat sensitive objects.
Rosco's Thermashield is an optical grade polyester film, finished on one side with a proprietary vacuum-deposited multi-layer coating. Set in the beam of a lighting instrument, it will reflect back infra-red energy, effectively reducing the radiated heat, while transmitting 80% of the visible light.
It is important to allow air space between the Thermashield and the color filter. This will allow much of the otherwise damaging heat energy to dissipate. It is necessary to affix Thermashield with the coated side facing the lamp. Each sheet of Thermashield is clearly marked so that users can easily identify which side of the clear film should be facing the lamp. If the label becomes detached, or if the sheet is cut so that the label is no longer available, there is an alternative technique. When tested with an ohm meter, only the coated side (the side which must face the lamp) will be conductive.
Thermashield permits the full range of Rosco color filters in fixtures which previously permitted only the use of glass or dichroics for color. Thermashield will boost the Kelvin temperature of a 3200° source about 300° Kelvin (a mired shift of approximately -10).