OUR PART # DTP522
This is a set of pads for use with the DTX522K electronic drum kit.
PCY135 is a 13" cymbal pad have the 3-zone structure in which each area of the pad, edge and bell produces a different tone. The natural "vibration" of the live cymbal sound can be faithfully reproduced.
PCY100 is a large, 10-inch cymbal pad. The cymbal pad consists of 3 separate zones, an edge zone, a bow zone, and a cup zone. This enables the pad to recreate the unique sounds that are produced when you hit different parts of a cymbal. The pad responds accurately to subtle differences in dynamics during performance and can faithfully reproduce delicate cymbal playing, powerful hits, and choking. Also, cymbal swinging and stick bouncing are reproduced realistically so that the pad feels natural even for drummers who normally perform on acoustic drums. Using this pad for cymbal performance training will also bring excellent results. In addition, PCY100 is able to be used as a Hi-Hat pad by switching off the Cup Switch.
Note: Before you purchase a pad, refer to the pad compatibility table to make sure that you can connect the pad to your drum trigger module (tone generator). * To install the pad in a DTXdrums drum rack, you need to use the CYAT500 cymbal holder (sold separately). These cymbal holders come with clamps. * You cannot attach the CYAT500 cymbal holder to a HEXRACK (e.g. HXR4LD).
HH675 is a hi-hat controller which can produce a full range of hi-hat effects such as full open, full closed, half open, and foot splash.
XP80 is an 8-inch electronic snare and tom drum pad with a realistic feel. The drum head is made of TCS (textured cellular silicone), and uses a free-floating construction for increased sensitivity that virtually eliminates cross talk. When we were developing this pad, we had it evaluated repeatedly by the world's top drummers. The detailed sense of perfection of these drummers is reflected in this drum pad. As a result, this drum pad performs superbly. At the same time, it is fantastically quiet. Its excellent feel and quietness make it ideal for home use.
The pad is divided into 3 zones and supports open rimshots and closed rimshots.
In addition, you can assign different voices to different zones. This makes highly original performances possible. For example, you can create an acoustic drum sound when you hit the head area, a cowbell sound when you hit the open rim area, and a loop sound when you hit the closed rim area.
Note: Before you purchase a pad, refer to the pad compatibility table to make sure that you can connect the pad to your drum trigger module (tone generator). * To use the DTX-PADs with the DTXT3, you need to update the firmware version.
TP70 is a 7.5 inch Snare/Tom 1-zone pad.
KP65 is a large rubber kick pad which is big enough for a double foot pedal setup. Plays quietly with very natural feel.