(0)

Questions? Call Us:
800-356-5844

Lab Gruppen IPD 1200
600W per channel @ 4 Ohms Stereo Power Amplifier

OUR PART #:  IPD-1200

The Lab.Gruppen IPD 1200 is a 600 Watts per channel at 4 Ohms stereo power amplifier with onboard DSP and ethernet-based networking.
Learn More

Call for price! Not available online.

Similar Products

The Lab.Gruppen IPD 1200 is a 600 Watts per channel at 4 Ohms stereo power amplifier with onboard DSP and ethernet-based networking.

With AES3 digital inputs standard, IPD Series amplifiers connect directly to digital console stage boxes, eliminating a DA/AD conversion cycle. AES3 inputs can be set for automatic failover to analog, and input mixing is available for all four inputs. At the power output end, connections are available on binding posts or Neutrik speakON.

The IPD Series packs more power into 1U than many competitors offer in 2U. The IPD 1200 delivers 600 Watts per channel at 4 ohms. This audio muscle is coupled with extraordinary intelligence. At the heart of the IPD platform is a latest-generation DSP engine equipped with up to a total of 40 real-time, multi-slope parametric EQs along with adjustable gain, input and output delay, and both high- and low-pass filters adjustable to any frequency.

All setup parameters for input mixing, DSP features and limiter setting are accessible on the front panel using two navigation buttons, a rotary encoder, and the backlit display. Individual channel mute buttons are also available. Up to 100 user-defined presets may be stored on-board.

Most users will also want to take advantage of the advanced, Ethernet-based networked monitoring and control features. Network configuration is fast and foolproof, with automatic discovery and identification of all connected amplifiers. The sleek GUI is designed for touch-based devices, and enables quick grouping of amplifiers along with intuitive setup and preset storage of all DSP parameters.

Extraordinary flexibility, high power density and competitive cost make IPD Series amplifiers equally at home whether in permanent installations, portable corporate AV systems, or touring band rigs. Wherever performance and reliability cannot be compromised, yet the budget is tight (and available rack space even tighter), IPD Series presents the singular solution.

IPD Series offers everything you’ve wanted in a Lab.gruppen intelligent power amplifier, but may have thought was not compact enough, too powerful or beyond your reach.

Lab.Gruppen IPD 1200 Features:

  • High power density with up to 1200 Watts in 1 U
  • Low mains current draw with proven IDEEA technology
  • AES3 and analog inputs with redundant failover
  • Link outputs for analog and AES3
  • Ethernet network connection
  • Fast network setup with auto-discovery and ID of amplifiers
  • Networked control via IntelliDrive Controller touch-based GUI
  • Wireless control via iPad (requires connection of WiFi router)
  • Four-channel input mixer
  • Backlit display with navigation buttons and encoder for front panel setup
  • Horizontal VU meters on display in operating mode
  • Mute buttons on front panel
  • Software configurable limiters:  SCVPL
  • Binding post and Neutrik speakON connectors
  • Outputs may be connected through either one (NL-4) or both speakONs
  • Universal power supply:  100 - 240 V at 50/ 60 Hz 
  • Integrated DSP includes:
    • 40 real-time, multi-slope parametric equalizers
    • Adjustable high-pass and low-pass filters
    • Input delay (up to 2 s)
    • Output delay (up to 2 s)
    • Crossover with multiple filter types
    • 100 user-definable presets

Lab.Gruppen IPD 1200 Specifications:

  • Number of channels: 2
  • Max Total Output All Channels Driven: 1200 W
  • Peak Output Voltage per Channel: 50 Vrms
  • Max. Output Current per Channel: 16 Arms
  • Max. Output Power Per Channel (All ChannelsDriven): 
    • 2 ohms: 500 W
    • 4 ohms: 600 W 
    • 8 ohms: 300 W 
    • 16 ohms: 150 W
  • THD 20 Hz - 20 kHz for 1 W: <0.1%
  • THD at 1 kHz and 1 dB below clipping: <0.05%
  • Signal To Noise Ratio: >105 dBA
  • Channel Separation (Crosstalk) at 1 kHz: >80dB
  • Frequency Response: 2 Hz - 42 kHz
  • Input Impedance: 18k Ohm
  • Common Mode Rejection (CMR:) 50 dB
  • Output Impedance: 25 Megohms
  • SCVPL: 70 V peak
  • Sensitivity for Full Power: 6 dBu
  • Gain (all DSP controls set to 0dB): 33.2 dBu
  • Level adjustment (per channel): Software controlled from -inf to 0 dB
  • Analog Input Connectors (per ch.): Neutrik XLR, 3-pin female
  • Analog Input Link Connectors (per ch.): Neutrik XLR, 3-pin male
  • AES Input Connectors (per ch.): Neutrik XLR, 3-pin female
  • AES Input Link Connectors (per ch.): Neutrik XLR, 3-pin male
  • Output Connectors (per ch.): Neutrik speakON /binding post
  • Buttons: Power, Menu, Back, Mute (per ch.), Power
  • Encoder: Adjust / Set
  • Cooling: Single fan, front to rear airflow, no filter required, temperature controlled speed
  • Nominal voltage: 100 - 240 VAC
  • Operating voltage: 60 - 265 VAC
  • Standby consumption: < 6.5 W
  • Mains connector: IEC inlet (locking)
  • Dimensions (Rack rail to rear panel, WxHxD): 19" x 1 RU x  10.7"
  • Dimensions (Overall incl. handles and rear support, WxHxD): 19" x  1 RU x  13.5"
  • Weight: 10.1 lbs
  • Finish: Black anodized aluminum front and black/ gray steel chassis
  • Approvals: CE, PSE, UL 60065, CAN/CSA-C22.2, No.60065:03, FCC part 15Class A, EN 55103-1, EN55103-2, ROHS
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.