(0)

Questions? Call Us:
866-334-8859

Philips Color Kinetics 101-000074-01
iColor MR gen3 LED Lamp, 30° Beam Angle

OUR PART #  101-000074-01

Our Price: $90.00
(Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

iColor MR gen3 is an intelligent color-changing lamp that delivers intense, saturated bursts of color and color-changing effects. The stylish housing fits into most standard MR16 fixtures, including tracks, cables, rails, and pendants. With high-intensity LED light sources and three beam angles, iColor MR gen3 is suitable for a wide-range of architectural, theatrical, and retail applications.

Philips Color Kinetics 101-000074-01 Features:

  • Standard GU5.3 base and two-pin MR16 connector
  • Works with standard 2-conductor jacketed cable or hook-up wire. Power /data supplies specifically designed for use with iColor MR gen3 multiplex power and data onto a two-wire circuit for use with conventional MR16 fixturesand sockets.
  • Use the 17° lamp when you need a spot of light with sharply defined edges,the 30° lamps for a wider spread of light, and the 90° (no optic) lamp for a soft, diffuse light.
  • Easily adaptable to a wide range of interior environments where MR16 fixtures are commonly used. With long useful source life, low power draw of just 5 W, and low-maintenance operation, iColor MR gen3 lamps cost significantly less to own and operate than conventional MR16 lamps.
  • Works seamlessly with the complete Philips Color Kinetics line of controllers, including Light System Manager, iPlayer 3, and ColorDial Pro, as well as third-party controllers.

Philips Color Kinetics 101-000074-01 Specifications:

Output

  • Lumens*: 151
  • LED Channels: Red / Green / Blue
  • Lumen Maintenance†: 100,000 hours L70 @ 40° C 100,000 hours L70 @ 25° C /100,000 hours L50 @ 40° C 100,000 hours L50 @ 25° C

Electrical

  • Input Voltage: 24 VDC from PDS-70mr
  • Power Consumption: 5 W maximum at full output, steady state

Control

  • Interface: PDS-70mr 24V (DMX / Ethernet)
  • Control System: Philips Color Kinetics full range of controllers, including Light System Manager, iPlayer 3, and ColorDial Pro, or third-party controllers

Physical

  • Fixture Connections: Standard 2-pin MR16 connector

Temperature Ranges

  • -4° – 104° F (-20° – 40° C) Operating
  • -4° – 104° F (-20° – 40° C) Startup
  • -40° – 176° F (-40° – 80° C) Storage
  • Humidity 0 – 95%, non-condensing
  • Maximum Fixture Run 14 maximum per PDS-70mr
  • Maximum cable length 50 ft (15 m)

Certification/Safety

  • Certifications: UL / cUL, FCC Class A, CE
  • Environment: Dry Location, IP20

NOTE: Due to continuous improvements and innovations, specifications may change without notice.

* Lumen measurement complies with IES LM-79-08 testing procedures.
† L70 = 70% lumen maintenance (when light output drops below 70% of initial output). L50 = 50% lumen maintenance (when light output drops below 50% of initial output). Ambient luminaire temperatures specified. Lumen maintenance calculations are based on lifetime prediction graphs supplied by LED source manufacturers. Calculations for white-light LED fixtures are based on measurements that comply with IES LM-80-08 testing procedures.

Philips Color Kinetics 101-000074-01
iColor MR gen3 LED Lamp, 30° Beam Angle

OUR PART #  101-000074-01

Product Information:

iColor MR gen3 is an intelligent color-changing lamp that delivers intense, saturated bursts of color and color-changing effects. The stylish housing fits into most standard MR16 fixtures, including tracks, cables, rails, and pendants. With high-intensity LED light sources and three beam angles, iColor MR gen3 is suitable for a wide-range of architectural, theatrical, and retail applications.

Philips Color Kinetics 101-000074-01 Features:

  • Standard GU5.3 base and two-pin MR16 connector
  • Works with standard 2-conductor jacketed cable or hook-up wire. Power /data supplies specifically designed for use with iColor MR gen3 multiplex power and data onto a two-wire circuit for use with conventional MR16 fixturesand sockets.
  • Use the 17° lamp when you need a spot of light with sharply defined edges,the 30° lamps for a wider spread of light, and the 90° (no optic) lamp for a soft, diffuse light.
  • Easily adaptable to a wide range of interior environments where MR16 fixtures are commonly used. With long useful source life, low power draw of just 5 W, and low-maintenance operation, iColor MR gen3 lamps cost significantly less to own and operate than conventional MR16 lamps.
  • Works seamlessly with the complete Philips Color Kinetics line of controllers, including Light System Manager, iPlayer 3, and ColorDial Pro, as well as third-party controllers.

Philips Color Kinetics 101-000074-01 Specifications:

Output

  • Lumens*: 151
  • LED Channels: Red / Green / Blue
  • Lumen Maintenance†: 100,000 hours L70 @ 40° C 100,000 hours L70 @ 25° C /100,000 hours L50 @ 40° C 100,000 hours L50 @ 25° C

Electrical

  • Input Voltage: 24 VDC from PDS-70mr
  • Power Consumption: 5 W maximum at full output, steady state

Control

  • Interface: PDS-70mr 24V (DMX / Ethernet)
  • Control System: Philips Color Kinetics full range of controllers, including Light System Manager, iPlayer 3, and ColorDial Pro, or third-party controllers

Physical

  • Fixture Connections: Standard 2-pin MR16 connector

Temperature Ranges

  • -4° – 104° F (-20° – 40° C) Operating
  • -4° – 104° F (-20° – 40° C) Startup
  • -40° – 176° F (-40° – 80° C) Storage
  • Humidity 0 – 95%, non-condensing
  • Maximum Fixture Run 14 maximum per PDS-70mr
  • Maximum cable length 50 ft (15 m)

Certification/Safety

  • Certifications: UL / cUL, FCC Class A, CE
  • Environment: Dry Location, IP20

NOTE: Due to continuous improvements and innovations, specifications may change without notice.

* Lumen measurement complies with IES LM-79-08 testing procedures.
† L70 = 70% lumen maintenance (when light output drops below 70% of initial output). L50 = 50% lumen maintenance (when light output drops below 50% of initial output). Ambient luminaire temperatures specified. Lumen maintenance calculations are based on lifetime prediction graphs supplied by LED source manufacturers. Calculations for white-light LED fixtures are based on measurements that comply with IES LM-80-08 testing procedures.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.