Questions? Call Us:

AcousticDesign 8" Two-Way Speaker for 70/100V Distributed Audio Lines with M10 Install Points in White


QSC’s AcousticDesign™ S8T surface mount loudspeakers are professional, 70/100V, 8"...
Learn More
Our Price: $490.00
Write the first review.
In Stock

Related Products

QSC’s AcousticDesign™ S8T surface mount loudspeakers are professional, 70/100V, 8", two-way, full-range systems ideal for a wide variety of foreground and background sound reinforcement applications. Ease-of-installation is the driving principle behind QSC’s next generation of small format, surface mount loudspeakers. Innovations found on AD-S loudspeakers enable designers and integrators to quickly and easily specify and install a system. AD-S loudspeakers are also a perfect solution to serve ancillary loudspeaker needs as part of a larger installed sound system.

Housed in rugged ABS enclosures for long-term durability, S8T loudspeakers employ DMT™ (Directivity Matched Transition) which matches the LF and HF coverage at the crossover point. This ensures even coverage across the listening plane for smooth, coherent audio reproduction. The 1.4" diaphragm, 1-in exit compression driver on the S8T delivers crisp, detailed high-frequency reproduction and when combined with the matched woofers, provides full bandwidth reproduction. To further enhance performance, tunings using QSC Intrinsic Correction techniques are available for Q-Sys and future QSC amplifiers. Moreover, the low saturation transformers offer premium performance on 70/100V distributed audio lines.

Installers will appreciate flexible mounting options. Euroblock connectors allow pre-wiring of the system and the included

X-Mount hardware enables the installer to mount the bracket and then simply lift the loudspeaker onto the mount and lock it into place. Moreover, the loudspeaker can attach to its mount on any plane to facilitate multiple deployment configurations.

AD-S loudspeakers can easily be mounted to any weight bearing, flat surface. Knurled surfaces on the mount’s pivot points ensure that the loudspeaker deployment angle stays fixed and will not slip over time. No special tools are required to install or adjust the loudspeaker angle. S8T models also feature M10 installation points for suspending the loudspeaker via eye-bolts as well as mounting points for an optional yoke bracket.

S8T loudspeakers meet IEC60529 IP-54 for dust and splash resistance and feature sealed input panels and powder coated aluminum grilles for added weather resistance. Presenting a clean, unobtrusive look, AD-S grilles are unadorned eliminating the need to cover obtrusive logo treatments. AD-S loudspeakers are available in either black (RAL 9011) or white (RAL 9010) and may be painted to match any décor.

To minimize impact and disposal fees at the job site, all AD-S loudspeakers are packaged in environmentally friendly, recyclable cartons.

QSC AD-S8T Features:

  • DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
  • Patent pending X-Mount™ enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over time
  • Optional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment options
  • Euroblock connectors allows pre-wiring of the system
  • Low saturation 70/100V transformers with 8 ohm bypass (S8T and S10T only)
  • Lightweight ABS enclosures offer long-term durability and lasting good looks
  • Sealed input panel cover and powder coated aluminum grilles for added weather resistance
  • Meets IEC60529 IP-54 for dust and splash resistance

QSC AD-S8T Specifications:

  • Effective Frequency Range (Free-field, -10 dB from on-axis sensitivity): 55 Hz - 20 kHz
  • Rated Noise Power / Voltage (IEC60268-1 noise signal for 2 Hrs): 200 Watts / 40 Volts (rms)
  • Broadband Sensitivity (On-Axis, free-field sensitivity, 2.83V, 1 m): 90 dB SPL
  • Coverage Angle (-6 dB): 105°
  • Directivity Factor (Q): 7
  • Directivity Index: 9 dB
  • Maximum Continuous SPL (Calculated from rated noise voltage and sensitivity): 113 dB
  • Maximum Peak SPL (Calculated from rated noise voltage and sensitivity): 119 dB
  • Rated Impedance: 8 Ohms
  • Recommended Amplifier Power: 400 Watts
  • Transformer Taps:
    • 70V: 60, 30, 15, 7.5 watts and 8 Ohm bypass
    • 100V: 60, 30, 15 watts and 8 Ohm bypass
  • HF Transducer: 1” exit / 1.4” voice-coil compression driver
  • LF Transducer: 8” weather resistant paper cone woofer, 2” / 51mm voice-coil
  • Input Connector Type: Euroblock connector with parallel output terminals
  • Enclosure Material: Painted ABS polymer
  • Grille Material: Powder coated aluminum
  • Ingress Protection: IP-54
  • Operating Environment: Designed for indoor and outdoor use
  • Testing:
    • The AD Series loudspeakers qualified for outdoor use using the following tests:
      • Salt Fog: MIL-STD-810G Method 509.5 for 100hrs.
      • Humidity: MIL-STD-810G Method 507.5, Natural cycle B2,cyclic high RH for 7 days
      • High and Low Temperature:  Tested according to QSC internal standards between -20° and 50° C
  • Operating Temperature Range:  20 to 50 °C (-4 to 122 °F)
  • Net Weight: 24.1 lbs (11 kg)
  • Product Dimensions: 17.3” x 10” x 9.9” (440mm x 254mm x 251mm)
  • Shipping Weight: 32.1 lbs (14.5 kg)
  • Shipping Dimensions: 24.3" x 13.8” x 13.8” (729mm x 351mm x 351mm)
  • Included Accessories: X-Mount mounting system, euroblock connector, input panel cover
  • Optional Accessories: YMS8T yoke mount, M10Kit-C (sold separately)
QSC M10 Kit-C Eye Bolt Kit for K/KLA12/S8T/S10T/S12 Loudspeakers
QSC M10 Kit-C Eye Bolt Kit for K/KLA12/S8T/S10T/S12 Loudspeakers
The QSC M10 Kit-C is an M10 forged-shoulder steel eyebolt kit designed for suspending K Series, KLA12 and AcousticDesign S8T, S10T and S12 loudspeakers.NOTE: Speaker shown in photos above is NOTincluded with purchase QSC M10 Kit-C ...

In Stock
Free Shipping Available
QSC YMS8T-WHT Yokemount for S8T-WHT
QSC YMS8T-WHT Yokemount for S8T-WHT
Steel yoke mount for suspending AcousticDesign S8T, S10T and S12 loudspeakers.Note: Product shown in image is for illustrative purposes only - actual product is in white.  

Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information

© 2018 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.