(0)

Questions? Call Us:
800-356-5844

Focusrite RedNet 4
8 channel remote controlled mic preamp and A-D interface for RedNet professional audio networking system

OUR PART #:  REDNET-4

RedNet is Focusrite’s new flagship range of Ethernet-networked studio interfaces...
Learn More
Our Price: $2,499.99
List Price: $2,999.99
You save 17%!

Full Compass offers free ground shipping on thousands of stock and non-stock (special order) items for orders placed on this web site and shipping in the continental US (48 states).

Learn More

Free Shipping

Available

We guarantee to match pricing on the products we sell for new, identical and immediately available products if you see them offered at a lower price. Please contact us if you find a lower price before purchasing.

Learn More

Low Price

Guaranteed

Focusrite RedNet 4
Qty:
Usually ships in 7-14 business days.
Need it sooner? Call us!

Similar Products

RedNet is Focusrite’s new flagship range of Ethernet-networked studio interfaces, based around the tried and tested Dante Ethernet audio networking system from Australian company Audinate. Focusrite’s RedNet is the first to offer IP network audio interfaces for the recording studio – or any application that requires moving high quality audio around with ultra-low latency.

NOTE: Before purchasing, please consult with our qualified sales engineers for advice on selecting the right RedNet system for you.

REDNET 4
RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable. With two selectable DI’s, RedNet 4 provides an effective range of analogue inputs for your system. The unit includes Focusrite’s world-class precision A-D conversion. Mic/Line/DI selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone pre-amp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain stages from the control room.

Key Features And Performance:

  • Eight high-quality Focusrite mic preamps
  • Selectable line and DI inputs for input flexibility
  • Dynamic range: 119dB
  • THD+Noise: <0.001%
  • Mic input Level up to +16dBu
  • Max mic input gain: 63dB
  • JetPLL™ jitter-reduction technology

Specifications:

Microphone Inputs

  • Gain range: 0 dB; 8 to 63 dB in 1 dB steps
  • Type: Electronically balanced, Zin = 2.4 kohms
  • Max. input level: +16 ±0.5 dB; min. gain for 0 dBFS, Rs = 150 ohms, padout
  • Min. input level: -47 ±0.5 dB; max. gain for 0 dBFS, Rs = 150 ohms, padout
  • Frequency response: 20 Hz – 55 kHz ±0.1 dB (-3 dB @ 80 kHz, fs = 192 kHz);Rs = 150 ohms
  • THD+N: < 0.0007% @ -1 dBFS; +15 dBu input, Rs =150 ohms, 20 Hz – 22kHz
  • Noise: EIN -128 dB; 60 dB gain, Rs = 150 ohms, 20 Hz – 22 kHz
  • Phantom power: 48 V, independently switchable per-channel
  • Signal-to-noise ratio: 119 dB ‘A’-weighted; Rs = 150 ohms

Line Inputs

  • Gain range: -12 to 42 dB in 1 dB steps
  • Max. input level: +24 ±0.5 dB; min. gain for 0 dBFS
  • Min. input level: -30 ±0.5 dB; max. gain for 0 dBFS
  • Frequency response: 20 Hz – 20 kHz ±0.1 dB
  • THD+N: 0.003% @ -1 dBFS; +23 dBu input, min.gain, 20 Hz – 22 kHz
  • Signal-to-noise ratio: 117 dB ‘A’-weighted

Instrument Inputs (Inputs 1 & 2 only)

  • Gain range: +14 to 68 dB in 1 dB steps
  • Max. input level: +10 ±0.5 dB; min. gain for 0 dBFS
  • Min. input level: -44 ±0.5 dB; max. gain for 0 dBFS, pad out
  • Frequency response: 20 Hz – 20 kHz ±0.1 dB
  • THD+N: 0.001% @ -1 dBFS; +9 dBu input, min.gain, 20 Hz – 22 kHz
  • Signal-to-noise ratio: 112 dB ‘A’-weighted

Analogue High-Pass Filters

  • Selection: Independently switchable per-channel
  • Frequency/slope: -6 dB @ 65 ±3 Hz, 12 dB/octave

Crosstalk

  • Input to input: -80 dB (all other channels at 0 dBFS)

Digital Performance

  • Supported sample rates: 44.1 / 48 / 88.2 / 96 / 192 kHz
  • Clock sources: Internal or from network master device

Power

  • PSU: Internal, Universal type, consumption 30 VA

Front Panel Indicators

  • Power: Green
  • Network connected: Green
  • Sync lock: Green
  • Sample rate: Yellow x 5
  • Channel 1/2 source: Yellow x 3 (mic/line/inst)
  • Signal level: Green x 8 (-42 dBFS); Yellow x 8 (-6 dBFS); Red x 8(overload)
  • Channel select buttons: 8
  • Channel function controls: Input source, HPF, phantom power, Gain encoder
  • Channel display: Colour OLED; channel number, input source, gain
16-Channel AD/DA Remote Dante Interface for RedNet Network Audio System
Focusrite RedNet 2 16-Channel AD/DA Remote Dante Interface for RedNet Network Audio System
The Focusrite RedNet 2 adds 16 remote-controlled analog channels in and out to your RedNet network and can be located anywhere you can run an Ethernet cable. Featuring Focusrite’s precision 24-bit A/D and D/A conversion for superb audio ...
3,099.99 3,699.99 16
Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available
8-Channel AD/DA Remote Dante Interface for RedNet Network Audio System
Focusrite RedNet 1 8-Channel AD/DA Remote Dante Interface for RedNet Network Audio System
The Focusrite RedNet 1 connects to your network with a single Ethernet cable. It’s remotely controlled via the network and can be placed anywhere in your facility. It offers eight channels of line-level analog in and out, with ...
2,099.99 2,499.99 16
Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available
32 Digital I/O Dante Interface for RedNet Professional Audio Networking System
Focusrite RedNet 3 32 Digital I/O Dante Interface for RedNet Professional Audio Networking System
RedNet is Focusrite's flagship range of Ethernet-networked studio interfaces, based around the tried and tested Dante Ethernet audio networking system from Australian company Audinate. Focusrite’s RedNet is the first to offer IP network ...
999.99 1,199.99 17
Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available
32-Channel RedNet to Pro Tools HD Dante Bridge Interface
Focusrite RedNet 5 32-Channel RedNet to Pro Tools HD Dante Bridge Interface
The Focusrite RedNet 5 connects your RedNet system to Pro Tools HD®. Up to six units can be connected to one Pro Tools HDX system, supporting up to 192 channels at 96 kHz or 96 channels at 192 kHz. Pro Tools HD® Native and Pro Tools HD® ...
999.99 1,199.99 17
Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.