(0)

Questions? Call Us:
866-334-8859

SKB Cases 3I-19148DSLR
iSeries Case for 2 DSLR Camera Bodies and 4 Lens

OUR PART #  3I-19148DSLR

Our Price: $279.99
List Price: $479.99
You save 42%! (Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

The iSeries 1914 Pro DSLR Case (3i-19148DSLR) is the ideal case to protect DSLR Cameras and their popular accessories. The interior of this case is made of high quality PE foam and can fit up to two camera bodies. The main camera compartment can be adjusted to fit a variety of DSLR body sizes. This section also has a perforated piece of foam that can be removed to accommodate cameras with battery grips. The orientation of the DSLR fit allows access to the memory card without removing the camera. It also allows for quick and easy access to the camera by leaving the grip exposed to grab.

This case features four lens slots. Three of the slots are adjustable to fit a variety of lenses. Each one of the three adjustable slots contains three half inch foam rings that can be removed to fit different sized lenses. There is a section for lens hoods which can also be adjusted by three half inch foam rings. This case has additional compartments to fit a flash, memory cards, batteries, and other additional accessories. This case has wheels and a pull out handle for easy transportation.

The iSeries 1914 Pro DSLR Case, (3i-19148DSLR) has TSA lockable trigger release latches for quick but secure access. This custom waterproof case is made in the USA and is backed by SKB’s Unconditional Lifetime Warranty.

Features:

  • Custom cut PE foam to fit up to two DSLR bodies, lenses, lens hoods, flash, batteries, memory cards and additional accessories  
  • Removable foam sections to fit a variety of camera bodies (e.g. cameras with battery grips) and lenses  
  • Patented TSA Trigger Release Latches  
  • Pull out handle and wheels  
  • Unconditional Lifetime Warranty  
  • Ultra high-strength polypropylene copolymer resin  
  • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)  
  • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)  
  • Automatic ambient pressure equalization value (MIL-STD-648C & IP67)  
  • Resistant to corrosion and impact damage  
  • Molded-in hinge  
  • Rubber over-molded cushion grip handle  
  • Locking loops for a customer supplied lock  
  • Patented "trigger release" latch system  
  • Rubber over-molded cushion grip handle

Specifications:

  • Interior Length  19.00 in
  • Interior Width  14.38 in
  • Interior Depth  8.00 in
  • Carton Length  10.25 in
  • Carton Width  17.13 in
  • Carton Depth  10.25 in
  • Lid Depth  2.00 in
  • Base Depth  6.00 in
  • Shipping Weight  16.20 lb
  • Product Weight  14.80 lb

SKB Cases 3I-19148DSLR
iSeries Case for 2 DSLR Camera Bodies and 4 Lens

OUR PART #  3I-19148DSLR

Product Videos:

Product Information:

The iSeries 1914 Pro DSLR Case (3i-19148DSLR) is the ideal case to protect DSLR Cameras and their popular accessories. The interior of this case is made of high quality PE foam and can fit up to two camera bodies. The main camera compartment can be adjusted to fit a variety of DSLR body sizes. This section also has a perforated piece of foam that can be removed to accommodate cameras with battery grips. The orientation of the DSLR fit allows access to the memory card without removing the camera. It also allows for quick and easy access to the camera by leaving the grip exposed to grab.

This case features four lens slots. Three of the slots are adjustable to fit a variety of lenses. Each one of the three adjustable slots contains three half inch foam rings that can be removed to fit different sized lenses. There is a section for lens hoods which can also be adjusted by three half inch foam rings. This case has additional compartments to fit a flash, memory cards, batteries, and other additional accessories. This case has wheels and a pull out handle for easy transportation.

The iSeries 1914 Pro DSLR Case, (3i-19148DSLR) has TSA lockable trigger release latches for quick but secure access. This custom waterproof case is made in the USA and is backed by SKB’s Unconditional Lifetime Warranty.

Features:

  • Custom cut PE foam to fit up to two DSLR bodies, lenses, lens hoods, flash, batteries, memory cards and additional accessories  
  • Removable foam sections to fit a variety of camera bodies (e.g. cameras with battery grips) and lenses  
  • Patented TSA Trigger Release Latches  
  • Pull out handle and wheels  
  • Unconditional Lifetime Warranty  
  • Ultra high-strength polypropylene copolymer resin  
  • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)  
  • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)  
  • Automatic ambient pressure equalization value (MIL-STD-648C & IP67)  
  • Resistant to corrosion and impact damage  
  • Molded-in hinge  
  • Rubber over-molded cushion grip handle  
  • Locking loops for a customer supplied lock  
  • Patented "trigger release" latch system  
  • Rubber over-molded cushion grip handle

Specifications:

  • Interior Length  19.00 in
  • Interior Width  14.38 in
  • Interior Depth  8.00 in
  • Carton Length  10.25 in
  • Carton Width  17.13 in
  • Carton Depth  10.25 in
  • Lid Depth  2.00 in
  • Base Depth  6.00 in
  • Shipping Weight  16.20 lb
  • Product Weight  14.80 lb
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.