(0)

Questions? Call Us:
866-334-8859

Radial Engineering X-Amp
500 Series Active Reamper Module

OUR PART #  X-AMP-500

Our Price: $299.99
List Price: $350.00
You save 14%! (Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

Recommended Accessories

The Radial X-Amp™ is a 500 series module that lets you take a pre-recorded guitar track and send it back to amplifiers and effects so that you can tailor the sound to suit.  The advantages of Reamping™ are many: when recording, the guitarist need only concentrate on the performance.  Working out specific sounds and optimal mic placement can be done later.  This eliminates hours of tiresome repetition while allowing the producer to adjust the character of the track as the production evolves.

Using the X-Amp is 'plug and play' easy to use.  The design begins with an XLR balanced line level input located on the 500 series rear panel that feeds the X-Amp.  To ensure the very highest fidelity, 100% discrete class-A circuitry is employed.  The X-Amp unbalances and buffers the pre-recorded signal where it then feeds two transformer isolated hi-Z guitar level outputs.  The 1/4" jacks are front mounted for desk-top convenience and equipped with ground lifts to help eliminate hum and buzz caused by ground loops.  Independent level controls enable you to adjust the drive going to each amp for optimal tone.  Should one of the amps be out of phase, depressing the 180Âş quickly brings both in line.

The X-Amp Reamper™ works with guitars, basses, keyboards and even voice.  You can send the signal through guitar effects pedals, too.

Features:

  • Active Reamp® designed for 500 series racks
  • 100% discrete class-A electronics for best tone
  • Transformer isolated to eliminate hum and buzz
  • Easy access front panel jacks & controls

X-Amp 500 Applications:

  • Recording a Dry Track with the X-Amp: Plug your guitar into some pedals,send the signal to the JDX to take advantage of the advanced multistagefilter.  No amps or mics to set up.
  • Reamping with the X-Amp: Send the prerecorded clean (dry) track to theX-Amp using the XLR input on your 500 series rack.  Feed the signal fromOut-1 and Out-2 to your guitar amps.  Mic them and record.
  • Using the X-Amp as a Distro: Connect your guitar to the Omniport on theWorkhorse.  The guitar signal can then be sent to two amplifiers usingout-1 and out-2 up to 15 meters (50 feet) away; adjust the volume to suit.
500 Series 10-Slot Rackmount ChassisRadial Engineering Powerhouse 500 Series 10-Slot Rackmount Chassis

Features: 10-slot design for maximum densityIndividual XLR & 1/4" TRS I/O on each slotEasy-Glide module alignment trayInnovative feed and link functionsRadial Engineering's Powerhouse is a 10-module 500 series power-rack designed to ...

In Stock

Free Shipping Available

Our Price:$899.99List Price: $1,000.00You save 10%!

8-Slot 500 Series Module Rack with 8-Channel MixerRadial Engineering Workhorse 500 8-Slot 500 Series Module Rack with 8-Channel Mixer

Radial Engineering's Workhorse 500 Features: 500 series 8 slot rack with 8x2 summing mixer Backwards compatible Plenty of current for power-hungry modules Dual output headphone buss for monitoringThe Radial Workhorse is a modular ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$1,399.99List Price: $1,650.00You save 15%!

8-Slot 500 Series FrameRadial Engineering WR8 8-Slot 500 Series Frame

Radial Engineering's Workhorse WR8 is an 8-slot 500 series mixer that is 100% compatible with all standard 500 series modules.  Individual XLR inputs and outputs are complimented with parallel 1/4" TRS connectors and Pro-Tools ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$749.99List Price: $850.00You save 12%!

500 Series 6-Slot Desktop Power RackRadial Engineering SixPack 500 Series 6-Slot Desktop Power Rack

The Radial Engineering SixPack is a desktop power rack for 500 series modules that lets you mix and match up to six modules and safely power them to create a stereo channel strip or unique signal chain.The design begins with a heavy 14 ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$499.99List Price: $600.00You save 17%!

500 Series 3-Slot Desktop Power Rack FrameRadial Engineering Workhorse Cube 500 Series 3-Slot Desktop Power Rack Frame

Features: Desktop power rack houses three 500 series modules Compatible with Radial and older API systems Provides up to 500 milliamps of shared current Optional angles let you recess it into the table topThe Cube™ is a three ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$349.99List Price: $400.00You save 13%!

12 Thumb ScrewsRadial Engineering Thumb Set 12 Thumb Screws

This set of 12 thumb screws from Radial Engineering is designed for securing your 500 Series modules into a Radial enclosure.Radial Engineering Part #: R700 9100

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$18.99List Price: $20.00You save 5%!

Radial Engineering X-Amp
500 Series Active Reamper Module

OUR PART #  X-AMP-500

Product Videos:

Product Information:

The Radial X-Amp™ is a 500 series module that lets you take a pre-recorded guitar track and send it back to amplifiers and effects so that you can tailor the sound to suit.  The advantages of Reamping™ are many: when recording, the guitarist need only concentrate on the performance.  Working out specific sounds and optimal mic placement can be done later.  This eliminates hours of tiresome repetition while allowing the producer to adjust the character of the track as the production evolves.

Using the X-Amp is 'plug and play' easy to use.  The design begins with an XLR balanced line level input located on the 500 series rear panel that feeds the X-Amp.  To ensure the very highest fidelity, 100% discrete class-A circuitry is employed.  The X-Amp unbalances and buffers the pre-recorded signal where it then feeds two transformer isolated hi-Z guitar level outputs.  The 1/4" jacks are front mounted for desk-top convenience and equipped with ground lifts to help eliminate hum and buzz caused by ground loops.  Independent level controls enable you to adjust the drive going to each amp for optimal tone.  Should one of the amps be out of phase, depressing the 180Âş quickly brings both in line.

The X-Amp Reamper™ works with guitars, basses, keyboards and even voice.  You can send the signal through guitar effects pedals, too.

Features:

  • Active Reamp® designed for 500 series racks
  • 100% discrete class-A electronics for best tone
  • Transformer isolated to eliminate hum and buzz
  • Easy access front panel jacks & controls

X-Amp 500 Applications:

  • Recording a Dry Track with the X-Amp: Plug your guitar into some pedals,send the signal to the JDX to take advantage of the advanced multistagefilter.  No amps or mics to set up.
  • Reamping with the X-Amp: Send the prerecorded clean (dry) track to theX-Amp using the XLR input on your 500 series rack.  Feed the signal fromOut-1 and Out-2 to your guitar amps.  Mic them and record.
  • Using the X-Amp as a Distro: Connect your guitar to the Omniport on theWorkhorse.  The guitar signal can then be sent to two amplifiers usingout-1 and out-2 up to 15 meters (50 feet) away; adjust the volume to suit.
500 Series 10-Slot Rackmount ChassisRadial Engineering Powerhouse 500 Series 10-Slot Rackmount Chassis

Features: 10-slot design for maximum densityIndividual XLR & 1/4" TRS I/O on each slotEasy-Glide module alignment trayInnovative feed and link functionsRadial Engineering's Powerhouse is a 10-module 500 series power-rack designed to ...

In Stock

Free Shipping Available

Our Price:$899.99List Price: $1,000.00You save 10%!

8-Slot 500 Series Module Rack with 8-Channel MixerRadial Engineering Workhorse 500 8-Slot 500 Series Module Rack with 8-Channel Mixer

Radial Engineering's Workhorse 500 Features: 500 series 8 slot rack with 8x2 summing mixer Backwards compatible Plenty of current for power-hungry modules Dual output headphone buss for monitoringThe Radial Workhorse is a modular ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$1,399.99List Price: $1,650.00You save 15%!

8-Slot 500 Series FrameRadial Engineering WR8 8-Slot 500 Series Frame

Radial Engineering's Workhorse WR8 is an 8-slot 500 series mixer that is 100% compatible with all standard 500 series modules.  Individual XLR inputs and outputs are complimented with parallel 1/4" TRS connectors and Pro-Tools ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$749.99List Price: $850.00You save 12%!

500 Series 6-Slot Desktop Power RackRadial Engineering SixPack 500 Series 6-Slot Desktop Power Rack

The Radial Engineering SixPack is a desktop power rack for 500 series modules that lets you mix and match up to six modules and safely power them to create a stereo channel strip or unique signal chain.The design begins with a heavy 14 ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$499.99List Price: $600.00You save 17%!

500 Series 3-Slot Desktop Power Rack FrameRadial Engineering Workhorse Cube 500 Series 3-Slot Desktop Power Rack Frame

Features: Desktop power rack houses three 500 series modules Compatible with Radial and older API systems Provides up to 500 milliamps of shared current Optional angles let you recess it into the table topThe Cube™ is a three ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$349.99List Price: $400.00You save 13%!

12 Thumb ScrewsRadial Engineering Thumb Set 12 Thumb Screws

This set of 12 thumb screws from Radial Engineering is designed for securing your 500 Series modules into a Radial enclosure.Radial Engineering Part #: R700 9100

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$18.99List Price: $20.00You save 5%!

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.