IsoAcoustics ISO-L8R155
Studio Monitor Stands, Pair


Product shown in image is for illustrative purposes only. Actual item is the monitor stand only - monitors shown not included with purchase.
Learn More
Our Price: $109.99
List Price: $129.99
You save 15%!
Write the first review.
IsoAcoustics ISO-L8R155
In Stock

Related Products

Product shown in image is for illustrative purposes only. Actual item is the monitor stand only - monitors shown not included with purchase.

The IsoAcoustics ISO-L8R155 Home and Studio Speaker Stands - Fine-tune your sound the way it's meant to be heard! IsoAcoustics offers three sizes of audio stand to fit your speakers. Each size is optimized to get the most from your particular speaker system. Stands can be configured to 3" or 8" in height, with inserts that provide a variety of tilt-up and tilt-down adjustments. In the lowest configuration, the monitor can be tilted down to focus the tweeter to a height below the original supporting surface - providing superior isolation and sound improvement.

Choose your set-up: ISO-L8R155 Short - In this case, the audio speaker stand is configured for 3" in height. Speaker can also be tilted for optimal listening angle. Usually speakers will be situated on a desktop or table.

ISO-L8R155 Long - Speaker stand is configured for 8" in height. Speaker can also be tilted up or down for exact listening angle. Can also be used for floor applications.


  • Frame and inserts (used for tilting the speaker) constructed ofhigh-density plastic and steel tubes
  • Isolators made of a high-modulus co-polymer that provides the perfectblend of strength and flexibility
  • Choice of sizes to fit a wide range of speakers manufacturers and sizes
  • Sold in pairs

The only audio speaker stands that address the PIF Principles - the three elements affecting sound IsoAcoustic's ISO-L8R adjustable speaker stand design system is a unique patented design that provides superior audio performance by supporting the PIF Principles in acoustic design:

  • Placement – proximity to adjacent and nearby surfaces. ISO-L8R audiostands raise the audio speakers or studio monitors off the supporting surfaceand away from adjacent surfaces to reduce reflections.
  • Isolation – from supporting surfaces. Decoupling the audio speakers orstudio monitors from the supporting surface reduces the energy from excitingother objects, and allows the speaker and enclosure to float independently.
  • Focus – Raising and tilting the audio speakers and studio monitors createsan ideal listening position by forming an equilateral triangle from thespeaker to the listener, with tweeters tilted to the listener's exact earlevel.

Height Adjustment

  • An important aspect of the speaker stand design is the ability to adjustthe height and tilt angle of the supported speaker enclosure to optimize itsposition relative to the listener. Two lengths of tubing along with 2 sets ofend-plug pairs provide 14 steps of height adjustment as the combinations areused to tilt the speaker up and down. The stand can be assembled andreconfigured repeatedly to establish the ideal position off the supportingsurface and focused towards the listener.
  • In a typical Desktop Audio Workstation (DAW) configuration, the listeneris positioned 3 to 4 feet from the monitors with ear level approximately 20"above the work surface. An enclosure containing an 8" speaker may position thehigh frequency driver 12" from the bottom while an enclosure with a 6" speakermay position the high frequency driver only 8" from the bottom. Raising andtilting these examples to their optimum position can easily be achieved withthis speaker stand design. This speaker stand configuration is also suited forapplications over longer distances such as in large recording studios or withconsumer products where home stereo speakers may ideally need to be raised 6"off the floor and tilted up 8 degrees.

Tilt Adjustment

  • The tube lengths and end-caps combinations provide a simple means toestablish optimal adjustment of large and small monitors over the typical 36to 48 inch listening distance for mixing and evaluation.


  • ISO-L8R speaker stands prevent the transfer of speaker cabinet energy tosurrounding surfaces, effectively isolating the speaker from the desktop,bookshelf or other surface. By allowing the speaker to perform in free space,it's able to sound the way it was intended. The end result is a more accurate,satisfying sound, which makes mixing and listening a better experience.

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information