OUR PART # S-MADI
Expand audio system possibilities with REAC and MADI. Up to 40x40 channels of digital audio transfer between REAC and MADI devices
Bridging REAC with MADI
S-MADI is bi-directional format converter between REAC and MADI. Up to 40x40 channels of digital audio transmission is possible between MADI equipment and REAC products such as the Digital Snake series, V-Mixers, and M-48 Live Personal Mixers. Both BNC and Optical I/O ports are included along with support for 56/64Ch mode. Clock source can be selected from REAC, MADI or Word Clock.
REAC SPLIT OUT
The REAC SPLIT OUT port provides audio signal from REAC or MADI enabling a separate monitoring or recording audio signal from the main stream. The SPLIT OUT supports REAC Embedded Power which supplies both the audio stream as well as power to a M-48 Live Personal Mixer or S-0808 Digital Snake.
A connected Digital Snake can be controlled using the S-4000R Remote Controller. Using the S-4000RCS dedicated software also enables control of Digital Snake and M-48 Personal Mixing setup and monitoring parameters.
This is an example of a live stage system using a Digital Snake with a MADI equipped digital console. Phantom power and preamp gain can be controlled from the S-4000R Remote Controller connected to the S-MADI.
Connect several M-48 Live Personal Mixers to a MADI equipped digital console. An additional M-48 can be connected to the SPLIT OUT port on the S-MADI that also supplies power - all over one Cat5e cable.
Monitor/Broadcast Position with Digital Snake
Here is an example of using a V-Mixer as a monitor or broadcast console along with a digital snake. The V-Mixer connects to the SPLIT OUT on the S-MADI bridge enabling a 32 channel split from the S-4000S separate from the FOH mix.