(0)

Questions? Call Us:
866-334-8859

Tripp Lite SNMPWEBCARD
Network Card For Remote Monitoring, Control via SNMP, Web or Telnet

OUR PART #  SNMP-WEBCARD

Our Price: $245.00
List Price: $350.00
You save 30%! (Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

Tripp Lite's SNMPWEBCARD allows network users to operate any expansion slot-equipped Tripp Lite SmartPro or SmartOnline UPS as a managed device on the network. Enables remote monitoring and control of UPS and site electrical conditions using the SNMP network management platform or a web browser. Provides remote viewing of site electrical data, UPS status information and self-test logs. Supports selective rebooting of locked network equipment without disrupting power to other devices when used with customized load management receptacles available on select Tripp Lite UPS systems. Optional ENVIROSENSE module provides remote temperature/humidity monitoring and a dry contact interface to control and monitor alarm, security and telecom devices. NEW firmware web-only version 12.06.0060 now available! - supports IPv6. Firmware is not applicable with cards running firmware version 12.04.0047 or earlier. NOTE: Existing 12.04.0048 and 12.04.0049 cards can be upgraded to the 12.04.0055 firmware to provide SNMPv3 support, then to 12.06.0060 for IPv6 support.

Feqatures:

NEW firmware web-only version 12.06.00 now available! - supports IPv6 - NOTE: Existing 12.04.0048 and 12.04.0049 cards can be upgraded to the new firmware to provide SNMPv3 support

  • Makes any slot-equipped Tripp Lite UPS a managed device on the network, controllable using SNMP network management platforms or a web browser
  • Web interface provides remote viewing of current site electrical data, UPS self-test and alert logs, as well as logged power events such as blackouts, brownouts, overvoltages, and other electrical problems
  • Offers the ability to control UPS output power and remote reboot of locked network devices without interrupting power to other loads when used with any Tripp Lite UPS equipped with load management receptacles
  • DHCP/Manual configuration support provides the ability to have network settings automatically assigned to the card, or manually assigned via permanent IP addresses
  • 10/100 Mbps auto-sensing allows optimal communication compatibility with your current 10/100 Base-T network
  • Real-time clock support maintains the time of day and date even if the UPS is shut down
  • NTP (Network Time Protocol) support gives the card the ability to receive automatic updates to its real-time clock from a NTP server
  • 2-tier level access allows an administrator and a guest to log into the web browser for monitoring and/or management of slot-equipped Tripp Lite UPS systems
  • Multiple user support allows for viewing by a number of users at the same time
  • Full Telnet access gives you the ability to remotely monitor and manage your UPS system via a TELNET session
  • Optional SSL (Secure Socket Layer) security setting provides the capability to create an encrypted connection to the card via a web browser
  • Offers the ability to shut down remote operating systems through your networks. (Supported operating systems must have Power Alert 12 installed. See PowerAlert section for software support)
  • Alert notifications via email or SNMP traps give users the added advantage of having an immediate event notification sent to them as a result of a site electrical or UPS problem.
  • Protocols supported include HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP
  • RoHS Compliant

System Requirements:

  • Tripp Lite UPS/PDU with SNMPWEBCARD 12.04.0053 or .0055
  • FTP utility
  • Web browser
  • Java Runtime Environment 1.6.026

NOTE: Existing 12.04.0048 and 12.04.0049 cards can be upgraded to the 12.04.0055 firmware to provide SNMPv3 support, then to 12.06.0060 for IPv6 support. Firmware is not applicable with cards running firmware version 12.04.0047 or earlier.

Inlcudes:

  • SNMPWEBCARD
  • Quick Start Installation Guide
  • Configuration Cable
  • Software CD including Owner's Manual & MIB files
  • Cover Plates (secures card in UPS system's SNMP accessory slot)

Tripp Lite SNMPWEBCARD
Network Card For Remote Monitoring, Control via SNMP, Web or Telnet

OUR PART #  SNMP-WEBCARD

Product Information:

Tripp Lite's SNMPWEBCARD allows network users to operate any expansion slot-equipped Tripp Lite SmartPro or SmartOnline UPS as a managed device on the network. Enables remote monitoring and control of UPS and site electrical conditions using the SNMP network management platform or a web browser. Provides remote viewing of site electrical data, UPS status information and self-test logs. Supports selective rebooting of locked network equipment without disrupting power to other devices when used with customized load management receptacles available on select Tripp Lite UPS systems. Optional ENVIROSENSE module provides remote temperature/humidity monitoring and a dry contact interface to control and monitor alarm, security and telecom devices. NEW firmware web-only version 12.06.0060 now available! - supports IPv6. Firmware is not applicable with cards running firmware version 12.04.0047 or earlier. NOTE: Existing 12.04.0048 and 12.04.0049 cards can be upgraded to the 12.04.0055 firmware to provide SNMPv3 support, then to 12.06.0060 for IPv6 support.

Feqatures:

NEW firmware web-only version 12.06.00 now available! - supports IPv6 - NOTE: Existing 12.04.0048 and 12.04.0049 cards can be upgraded to the new firmware to provide SNMPv3 support

  • Makes any slot-equipped Tripp Lite UPS a managed device on the network, controllable using SNMP network management platforms or a web browser
  • Web interface provides remote viewing of current site electrical data, UPS self-test and alert logs, as well as logged power events such as blackouts, brownouts, overvoltages, and other electrical problems
  • Offers the ability to control UPS output power and remote reboot of locked network devices without interrupting power to other loads when used with any Tripp Lite UPS equipped with load management receptacles
  • DHCP/Manual configuration support provides the ability to have network settings automatically assigned to the card, or manually assigned via permanent IP addresses
  • 10/100 Mbps auto-sensing allows optimal communication compatibility with your current 10/100 Base-T network
  • Real-time clock support maintains the time of day and date even if the UPS is shut down
  • NTP (Network Time Protocol) support gives the card the ability to receive automatic updates to its real-time clock from a NTP server
  • 2-tier level access allows an administrator and a guest to log into the web browser for monitoring and/or management of slot-equipped Tripp Lite UPS systems
  • Multiple user support allows for viewing by a number of users at the same time
  • Full Telnet access gives you the ability to remotely monitor and manage your UPS system via a TELNET session
  • Optional SSL (Secure Socket Layer) security setting provides the capability to create an encrypted connection to the card via a web browser
  • Offers the ability to shut down remote operating systems through your networks. (Supported operating systems must have Power Alert 12 installed. See PowerAlert section for software support)
  • Alert notifications via email or SNMP traps give users the added advantage of having an immediate event notification sent to them as a result of a site electrical or UPS problem.
  • Protocols supported include HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP
  • RoHS Compliant

System Requirements:

  • Tripp Lite UPS/PDU with SNMPWEBCARD 12.04.0053 or .0055
  • FTP utility
  • Web browser
  • Java Runtime Environment 1.6.026

NOTE: Existing 12.04.0048 and 12.04.0049 cards can be upgraded to the 12.04.0055 firmware to provide SNMPv3 support, then to 12.06.0060 for IPv6 support. Firmware is not applicable with cards running firmware version 12.04.0047 or earlier.

Inlcudes:

  • SNMPWEBCARD
  • Quick Start Installation Guide
  • Configuration Cable
  • Software CD including Owner's Manual & MIB files
  • Cover Plates (secures card in UPS system's SNMP accessory slot)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.