Sonty's HZC-RCP5 application software enables the user to control Sony's HXC-D70 studio camera and HXCU-D70 CCU from a Windows PC.
Two GUI modes: Panel and Menu
Capability to control up to 5 cameras
Communicates with cameras via TCP/IP LAN connection
Panel Screen (Panel Mode) In this mode, the basic functions of acamera can be controlled by the GUI on the screen, similar to the controllevel found with an RCP-1000 series remote control processor.
Paint Menu Screen (Menu Mode) In this mode, more detail cameraparameters (ie. Matrix, Knee and so on) of HXC-D70 camera can be displayed andcontrolled by the GUI.
Operating System: Windows-7 English version (with service pack-1 andNET Framework 3.5.1 or later version installed) Professional 32-/64-bitsUltimate 32-/64-bits
Hardware: Memory: 2GB or more With LAN interface; A monitor withresolution of 1024x768 pixels or higher; CPU with clock rate 1GHz or more
Firewall: This application communicates with cameras via TCP/IP LANconnection. During the operation, the communication port for this applicationmust not be closed with OS or security software such as a firewall. When afirewall is in place, use TCP port 7700. Connections using the Internetor an Intranet may cause problems of competition with other traffic orsecurity, and sufficient performance may not be obtained. For stable systemoperation, it is recommended to configure a separate network. To avoiddisconnection of transmission, be sure to set the power-saving function of aPC to OFF. The power-saving function of a monitor does not affecttransmission. Wireless LAN connection may cause unstable status in someenvironments.
Connectable Devices: As of December 2011, this application can support HXCU-D70 with HXC-D70 camera only. Other CCU (camera) has not been supportedin this software version.