Tripp Lite APS750 PowerVerter APS AC Inverter and Charger, 750W

Tripp Lite's APS750 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 750 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. OverPower™ inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and DoubleBoost™ inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 20 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on start-up. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information (APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages.

Features:

• 12V DC or 120V AC input; 120V AC output; 2 outlets
• 750 watts continuous, 1125 watts OverPower™ and 1500 watts DoubleBoost™ inverter output
• 3 stage, 20 amp selectable wet/dry cell battery charger
• Auto Transfer Switching option for battery backup / UPS operation
• Reliability enhanced large-transformer design

Specifications:

• OUTPUT
  • Frequency compatibility 60 Hz
  • Output watts 750
  • Continuous output capacity (watts) 750
  • Peak output capacity (watts) 1500
  • Output nominal voltage 120V
  • Output voltage regulation LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
  • Output frequency regulation 60 Hz (+/- 0.3 Hz)
  • Overload protection Includes 6A AC input breaker dedicated to the charging system and 8A output breaker for AC output loads
  • Outlet quantity / type 2 AC outlets
• INPUT
  • Recommended Electrical Service DC INPUT: Requires 12V DC input source capable of delivering 72A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120V AC recommended
  • Maximum input amps / watts DC INPUT: Full continuous load - 72A at 12V DC. AC INPUT: 8 amps at 120VAC with full inverter and charger load (4.2A max charger-only)
  • Input connection type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug
  • Voltage compatibility (VAC) 120
  • Voltage compatibility (VDC) 12
• BATTERY
  • Expandable battery runtime Runtime is expandable with any number of user supplied wet, gel or SLA batteries
  • DC system voltage (VDC) 12
  • Battery recharge rate 20A