DPA Microphones ST4006A
Stereo Microphone Pair with (2) 4006A Omnidirectional Microphones

OUR PART #:  ST4006A

The DPA ST4006A is a complete DPA 4006A Stereo Pair with two carefully factory-matched omni microphones.
Learn More
Our Price: $4,739.95
Write the first review.
DPA Microphones ST4006A
Qty:
Usually ships in 7-14 business days.
Need it sooner? Call us!

The DPA ST4006A is a complete DPA 4006A Stereo Pair with two carefully factory-matched omni microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer.

The specially selected DPA 4006A microphones are matched within ±0.5 dB on both frequency response and sensitivity. The maximum phase response difference is 5°.

The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphone pair makes the ST4006A the perfect choice for all AB Stereo recordings. The design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory foam inlays.

Features:

  • Carefully matched microphones
  • High sensitivity, low noise-floor and extremely linear frequency
  • Peli case transportation and protection

Specifications:

  • Directional pattern:  Omnidirectional
  • Principle of operation:  Pressure
  • Cartridge type:  Pre-polarized condenser
  • Frequency range:  10 Hz - 20 kHz
  • Frequency range, ± 2 dB:  10 Hz - 20 kHz
  • Sensitivity, nominal, ± 2 dB at 250 Hz:  40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted:  Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
  • Equivalent noise level, ITU-R BS.468-4:  Typ. 27 dB (max. 29 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):  Typ. 79 dB(A)
  • Total Harmonic Distortion (THD):  < 1 % up to 139 dB SPL peak
  • Dynamic range:  Typ. 124 dB
  • Max. SPL, peak before clipping:  147 dB
  • Switchable attenuator:  0 dB / -20 dB
  • Output impedance:  < 200 ohm
  • Minimum load impedance:  2 kohm
  • Cable drive capability:  100 m (328 ft)
  • Output balance principle:  Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR):  > 60 dB
  • Power supply (for full specifications):  48 V Phantom power (± 4 V)
  • Current consumption:  2.8 mA
  • Connector:  XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color:  Matte black
  • Weight:  163 g (5.7 oz)
  • Microphone diameter:  16 - 19 mm (0.6 - 0.75 in)
  • Capsule diameter:  16 mm (0.6 in)
  • Microphone length:  170 mm (6.7 in)
  • Output voltage, RMS:  > 5 V
  • Polarity:  +V at pin 2 for positive sound pressure
  • Temperature range:  -40 °C to 50 °C (-40 °F to 122 °F)
  • Relative Humidity (RH):  Up to 90%
  • Classification:  Conforms to IEC 61672 Class I (with Near-field Grid DD0251)
  • Matching tolerance:  ± 0.5 dB
  • Phase deviation for kit:  < 5°

What's Included:

  • Two carefully matched 4006A omni microphones
  • Sturdy Peli case
  • Holders
  • Grids
  • Windscreens.

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information