Aviom MIX1
Personal Mixing System, Single Person


Our Price: $1,760.00
List Price: $1,925.00
You save 9%! (Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

The Mix1 mixing system is the perfect way to get started with Aviom personal mixing. It features one AN-16/i Input Module, which accepts up to 16 line-level input sources, as the head-end of the system. Audio is converted to digital and transmitted via A- Net®, up to 500ft/150m over Cat-5e. A dedicated audio thru is available for each input channel, allowing the AN-16/i to be seamlessly inserted into an existing audio signal path.

The 16-channel A-16II Personal Mixer allows a performer to create and save up to 16 custom mixes, and gives each performer control over channel volume, grouping, pan, stereo spread, along with master volume and tone. The system also includes an MT-1 to allow the personal mixer to be mounted on any standard mic stand.

This basic mixing system can be easily expanded at any time by adding additional personal mixers.


AN-16/i Input Module

  • Audio Inputs: 16, balanced line-level, 1/4-inch TRS connector
  • Inputs:
      -  Tip: Audio +
      -  Ring: Audio-
      -  Sleeve: Ground
  • TRS Thru: Impedance matched output
  • Analog to Digital Conversion:  48kHz sample rate, 24 bit
  • Frequency Response:  4Hz-22kHz
  • A-Net Output:  one Category 5 (RJ45 connector)
  • A-Net Expansion:  one Category 5 (RJ45 connector)
  • Gain Settings:  Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu
  • Channel LED Indicators:  Signal Present and Clip, per channel
  • Line Inputs:  Impedance: 48k ohms
  • Metering:
      -  LEDs
      -  Green: SignalPresent
      -  Red: Clip; per channel
  • Stereo Operation: Stereo Link, per channel pair; Two-position switch (Normal, Link)
  • Maximum Input Level: +22dBu
  • Input Impedance: 17.8k ohm
  • Freq. Response: 4Hz-22kHz +0.2dB/-3dB
  • THD +N: < 0.003%
  • Crosstalk: -90dB
  • Bit Error Rate (BER):  10(-12)
  • Signal to Noise (unweighted):  90dB typical, A/D to D/A (Measured from AN- 16/i to AN-16/o Output Module)
  • Digital Outputs:
      -  A-Net: 1
     -  A-Net Expansion: 1
      -  RJ45 connector
  • A-Net Pro16: A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; use unshielded Cat-5e UTP (or better) cable
  • Latency: <0.880 msec (measured from analog input to analog output)
  • Power Supply: External, DC, universal switching type
  • Input Voltage:100-240 volts, 50/60Hz, 30VA
  • Output Voltage:18-24 VDC, 0.5 amp
  • Plug Size: 2 mm
  • Power: 18-24 VDC, 500mA
  • Dimensions: 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
  • Weight:  6.8 lbs. (3.08 kg)

A-16II Personal Mixer

  • Audio Output:  1/4-inch TRS stereo, headphone or line level
  • Line/Headphone TRS Output: (Auto-detects mono plugs)
     -  Tip: Audio Left
      -  Ring: AudioRight
      -  Sleeve: Ground
  • A-Net Input/Output:
      -  1 A-Net input
     -  1 A-Net output
      -  Category 5 (RJ45 connector)
  • Digital to Analog Conversion Bit Depth:  24 bit
  • Signal to Noise Ratio: -103dB (Referenced to 0dB)
  • Latency:  <0.880 msec (measured from analog input to analog output)
  • Pro16 A-Net:  uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices
  • Tone Controls:
      -  Treble +/-12dB at 9kHzshelving
      -  Bass +/-12dB at 160Hz shelving
  • Maximum Levels (RMS):  Line/Headphone outs: 1.0 watt at 100 ohms
  • Impedance:  Line/Headphone outs: 32 ohms
  • Power Supply: (External, DC, universal switching type
  • Input Voltage: 18-24 VDC, 0.5 amp
  • Output Voltage: 100-240 volts, 50/60Hz, 30VA
  • Plug Size: 2 mm
  • Dimensions: 10.75" (273 mm) wide x 5.6" (142.2 mm) deep; 2.25" (57.5 mm) high
  • Weight:  3.4 lbs. (1.54 kg)
  • Options:
      -  MT-1 Mic Stand Mount (uses 6-32 1/4-inchscrews)
      -  EB-1 Extension Bracket
      -  MT-XExpansion Box (requires MT-1)

MT-1 Mic Stand Mount

  • Boxed Weight:  1lb.
  • Boxed Dimensions:  7"w x 5"d x 3"h
  • Dimensions:  6.25" wide at front x 4.5" wide at rear x 3" high
  • Connections:  Attaches with three screws to bottom of A-16II or A-16CS
  • Connectors:  size: 6-32, 1/4-inch long screws

What's Included:

  • (1) AN-16/i Input Module
  • (1) A-16II Personal Mixer
  • (1) MT-1 Mic Stand Mount
Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.