(0)

Questions? Call Us:
866-334-8859

Radial Engineering JDV-PRE
Discrete Instrument Preamp

OUR PART #  JDV-PRE

Our Price: $449.99
List Price: $500.00
You save 10%! (Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

Recommended Accessories

Radial Engineering's JDV-PRE is a unique preamplifier designed specifically to capture the natural tone and distinct character of the instrument.  Unlike mic preamplifiers that are centered on 'the microphone', the JDV-Pre is focused on the various types of pickups used while transferring the signal without introducing distortion or artefact of any type.

The design begins with a 100% discreet class-A amplifier for optimal signal transfer.  But unlike all other amplifier designs, the JDV-Pre's front end is completely void of the negative feedback loops normally used to stabilize the circuit.  This design eliminates the use of phase-cancellation which inevitably degrades the signal.  This is augmented with Drag Control™ load correction that allows the engineer to optimize the load on the instrument pickup for the most natural rendering.

When the impedance is set for piezo pickups, the JDV-Pre remains remarkably quiet.  Accustate gain control not only allows complete freedom over the signal path, but retains the signal-to-noise ratio at all levels.  Acoustic instruments are further advantaged with a fully variable high-pass filter that gently rolls of the low end to eliminate troublesome body resonance while allowing each instrument to sit more comfortably in the mix.  To address instrument microphones, the JDV-Pre features a transformer coupled balanced mic input with available 48V phantom power for condenser microphones.  Connection is made via standard 500 series rack XLR input.

Radial Engineering JDV-PRE Features:

  • 100% discrete class-A instrument and mic preamp
  • Feed forward front-end, void of negative feedback
  • AccuState gain control for low noise at all levels
  • Variable low frequency cut for acoustic instruments
500 Series 10-Slot Rackmount ChassisRadial Engineering Powerhouse 500 Series 10-Slot Rackmount Chassis

Features: 10-slot design for maximum densityIndividual XLR & 1/4" TRS I/O on each slotEasy-Glide module alignment trayInnovative feed and link functionsRadial Engineering's Powerhouse is a 10-module 500 series power-rack designed to ...

In Stock

Free Shipping Available

Our Price:$899.99List Price: $1,000.00You save 10%!

8-Slot 500 Series Module Rack with 8-Channel MixerRadial Engineering Workhorse 500 8-Slot 500 Series Module Rack with 8-Channel Mixer

Radial Engineering's Workhorse 500 Features: 500 series 8 slot rack with 8x2 summing mixer Backwards compatible Plenty of current for power-hungry modules Dual output headphone buss for monitoringThe Radial Workhorse is a modular ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$1,399.99List Price: $1,650.00You save 15%!

8-Slot 500 Series FrameRadial Engineering WR8 8-Slot 500 Series Frame

Radial Engineering's Workhorse WR8 is an 8-slot 500 series mixer that is 100% compatible with all standard 500 series modules.  Individual XLR inputs and outputs are complimented with parallel 1/4" TRS connectors and Pro-Tools ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$749.99List Price: $850.00You save 12%!

500 Series 6-Slot Desktop Power RackRadial Engineering SixPack 500 Series 6-Slot Desktop Power Rack

The Radial Engineering SixPack is a desktop power rack for 500 series modules that lets you mix and match up to six modules and safely power them to create a stereo channel strip or unique signal chain.The design begins with a heavy 14 ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$499.99List Price: $600.00You save 17%!

500 Series 3-Slot Desktop Power Rack FrameRadial Engineering Workhorse Cube 500 Series 3-Slot Desktop Power Rack Frame

Features: Desktop power rack houses three 500 series modules Compatible with Radial and older API systems Provides up to 500 milliamps of shared current Optional angles let you recess it into the table topThe Cube™ is a three ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$349.99List Price: $400.00You save 13%!

12 Thumb ScrewsRadial Engineering Thumb Set 12 Thumb Screws

This set of 12 thumb screws from Radial Engineering is designed for securing your 500 Series modules into a Radial enclosure.Radial Engineering Part #: R700 9100

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$18.99List Price: $20.00You save 5%!

Radial Engineering JDV-PRE
Discrete Instrument Preamp

OUR PART #  JDV-PRE

Product Information:

Radial Engineering's JDV-PRE is a unique preamplifier designed specifically to capture the natural tone and distinct character of the instrument.  Unlike mic preamplifiers that are centered on 'the microphone', the JDV-Pre is focused on the various types of pickups used while transferring the signal without introducing distortion or artefact of any type.

The design begins with a 100% discreet class-A amplifier for optimal signal transfer.  But unlike all other amplifier designs, the JDV-Pre's front end is completely void of the negative feedback loops normally used to stabilize the circuit.  This design eliminates the use of phase-cancellation which inevitably degrades the signal.  This is augmented with Drag Control™ load correction that allows the engineer to optimize the load on the instrument pickup for the most natural rendering.

When the impedance is set for piezo pickups, the JDV-Pre remains remarkably quiet.  Accustate gain control not only allows complete freedom over the signal path, but retains the signal-to-noise ratio at all levels.  Acoustic instruments are further advantaged with a fully variable high-pass filter that gently rolls of the low end to eliminate troublesome body resonance while allowing each instrument to sit more comfortably in the mix.  To address instrument microphones, the JDV-Pre features a transformer coupled balanced mic input with available 48V phantom power for condenser microphones.  Connection is made via standard 500 series rack XLR input.

Radial Engineering JDV-PRE Features:

  • 100% discrete class-A instrument and mic preamp
  • Feed forward front-end, void of negative feedback
  • AccuState gain control for low noise at all levels
  • Variable low frequency cut for acoustic instruments
500 Series 10-Slot Rackmount ChassisRadial Engineering Powerhouse 500 Series 10-Slot Rackmount Chassis

Features: 10-slot design for maximum densityIndividual XLR & 1/4" TRS I/O on each slotEasy-Glide module alignment trayInnovative feed and link functionsRadial Engineering's Powerhouse is a 10-module 500 series power-rack designed to ...

In Stock

Free Shipping Available

Our Price:$899.99List Price: $1,000.00You save 10%!

8-Slot 500 Series Module Rack with 8-Channel MixerRadial Engineering Workhorse 500 8-Slot 500 Series Module Rack with 8-Channel Mixer

Radial Engineering's Workhorse 500 Features: 500 series 8 slot rack with 8x2 summing mixer Backwards compatible Plenty of current for power-hungry modules Dual output headphone buss for monitoringThe Radial Workhorse is a modular ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$1,399.99List Price: $1,650.00You save 15%!

8-Slot 500 Series FrameRadial Engineering WR8 8-Slot 500 Series Frame

Radial Engineering's Workhorse WR8 is an 8-slot 500 series mixer that is 100% compatible with all standard 500 series modules.  Individual XLR inputs and outputs are complimented with parallel 1/4" TRS connectors and Pro-Tools ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$749.99List Price: $850.00You save 12%!

500 Series 6-Slot Desktop Power RackRadial Engineering SixPack 500 Series 6-Slot Desktop Power Rack

The Radial Engineering SixPack is a desktop power rack for 500 series modules that lets you mix and match up to six modules and safely power them to create a stereo channel strip or unique signal chain.The design begins with a heavy 14 ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$499.99List Price: $600.00You save 17%!

500 Series 3-Slot Desktop Power Rack FrameRadial Engineering Workhorse Cube 500 Series 3-Slot Desktop Power Rack Frame

Features: Desktop power rack houses three 500 series modules Compatible with Radial and older API systems Provides up to 500 milliamps of shared current Optional angles let you recess it into the table topThe Cube™ is a three ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$349.99List Price: $400.00You save 13%!

12 Thumb ScrewsRadial Engineering Thumb Set 12 Thumb Screws

This set of 12 thumb screws from Radial Engineering is designed for securing your 500 Series modules into a Radial enclosure.Radial Engineering Part #: R700 9100

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$18.99List Price: $20.00You save 5%!

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.