Product Overview
The Shure VP89 is a professional shotgun condenser microphone for use in critical broadcast and media production applications. Designed with interchangeable long, medium and short capsules, the VP89 models provide scalable, superior off-axis rejection for focus and flexibility in a wide variety of on-site locations. The VP89L is the longest model in the series. Carrying case and foam windscreen included.
Shure VP89L Features:
- Updated Technology
- State-of-the-art preamplifier design
- Superior RF immunity
- Internal low-frequency roll-off
- Recessed low-cut filter switch for additional control
- Smaller footprint
- Superior Shure design and rugged, roadworthy construction
- Long Cartridge/Barrel Housing
- For targeting sound sources over long distances (sporting events, ENG, wildlife, field recording)
- Extremely narrow pickup angle
- Unmatched quality of off-axis rejection
Shure VP89L Specifications:
- Cartridge Type: Electret Condenser
- Polar Pattern: Hypercardioid / Lobar
- Frequency Response: 60Hz to 20kHz
- Output Impedance: 115 Ohms
- Sensitivity: (Open circuit voltage at 1kHz, typical): -33.5dBV/Pa (2.11mV)
- Maximum SPL (1kHz at 1% THD): 2500 Ohm load = 132dB // 1000 Ohm load =113.5dB
- Signal-to-Noise Ratio: 79dB
- Dynamic Range at 1 kHz: 2500 Ohm load = 4.0dBV // 1000 Ohm load = 0.0dBV
- Clipping Level (at 1kHz, 1%THD): 2500 Ohm load =4.0dBV // 1000 Ohmload = 0.0dBV
- Self Noise (equivalent SPL, A-weighted, typical): 15dB
- Low-Frequency Filter Switch: -12dB/octave below specified frequency
- Flat Response: 100Hz
- Low Frequency Roll-off: 200Hz
- Operating Temperature Range: -20° - 165°F
- Operating Relative Humidity: 0 to 95%
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Housing: Charcoal-gray metallic painted aluminum alloy handle grille with stainless steel screen
- Power Requirements: 11-52VDC phantom power (IEC-61938),
- Length: 15.21"
- Net Weight: 6.1oz.
