Audix M1280BO Miniature Omnidirectional Condenser Mic with Extended Frequency Response, Black

A versatile small condenser microphone with a wide frequency range.

The M1280BO is available with a large selection of clips and accessories allowing it to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.

The M1280BO miniaturized condenser microphone is equipped with an omnidirectional capsule, a fully integrated preamp, and a detachable cable. Its design gives it complete immunity from RF interference caused by cell phones and GSM devices, and it has a wide frequency response of 40 Hz-20 kHz allowing use in a wide variety of stage, studio, and broadcast applications.

Note: Images shown above are for illustrative purposes only; actual product is the omnidirectional model. Please contact your Sales Pro for more information on this and other products.

Audix M1280BO Applications:

Overhead mic for choir, group vocal

Acoustic instruments

Ambient room miking

Symphonic area miking

Speech, Presentation, Podium

Cymbals, Percussion

Acoustic guitar

Audix M1280BO Includes:

• 1 x M1280BO Miniaturized Condenser Mic
• 1 x CBLM25 25-Foot Cable with Mini ALRF-XLRM Connectors
• 1 x MCMICRO Mic Stand Adapter
• 1 x MCHANGER Hanging Clip
• 1 x WS1218 External Windscreen

Audix M1280BO Features:

• Lightweight, small profile
• Miniaturized preamp circuitry
• No external power adapter needed
• 12 mm gold vapor diaphragm
• Immune to RF interference
• Extremely low noise, high SPL handling
• Designed, assembled, manufactured & tested in the USA
• 3 year warranty

Audix M1280BO Specifications:

• Transducer Type: Condenser
• Frequency Response: 40 Hz – 20 kHz
• Polar Pattern: Omni
• Output Impedance: 150 ohms
• Sensitivity: 12 mV / Pa @ 1k
• Equivalent Noise Level: 21 dB (A-weighted)
• Signal to Noise Ratio: 73 dB
• Maximum SPL: ≥ 147 dB
• Power Requirements: 18 – 52 V
• Dynamic Range: 126 dB
• Connector: 3-pin XLRm
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
• Material: Machined Brass
• Finish: Black
• Weight: 28 g (1 oz)
• Length: 67 mm (2.6")