(0)

Questions? Call Us:
866-334-8859

Quam DTS2
Desktop Station with Flush Mic & 3" Speaker

OUR PART #  DTS2

Our Price: $288.30
List Price: $449.14
You save 36%! (Low Price Guarantee)
In Stock

Quam-Nichols' DTS2 desktop intercom station is a vandal-resistant, flush-mounted electret microphone/loudspeaker assembly with push-to-talk (PTT) button switch.  Loudspeaker baffle is 12 gage, brushed stainless steel with vandal-resistant internal baffle; enclosure is 16 gauge CRS with 'pin-in-torx' hardware.

Console finish: Black baked epoxy hybrid finish.

Intended Use: Indoor environment, simplex two-way communication using PTT microphone and internal, 'never full off' volume controlled, moisture-resistant loudspeaker.  Loudspeaker internally configured for either 8O or 25V systems.  3.5mm output jack allows use of low impedance headset (not supplied), bypassing loudspeaker function.  Pre-drilled holes in base for bolt-down applications.

Program Material: Voice and signal tones

Specifications:

  • Microphone Type: Unidirectional Electret
  • Sensitivity: -51 dBV/Pa ±4dB*
    *0 dB = 1V/Pa, 1kHz
  • Impedance: 600 ohms Nominal
  • Frequency Response: 180-12kHz, ±3dB
  • Supply Voltage: 1.5V, 0.5mA maximum draw
  • Loudspeaker Size: 3" Frame
  • Average Sensitivity: 87 dB, 1W/1M
  • Frequency Response: 150 Hz -10 kHz
  • Volume Control: -15 dB Maximum attenuation
  • Headset Jack: 3.5mm, mono output, disconnects 'never full off' speaker output when activated
  • Electrical Connections: Internal barrier strip

Quam DTS2
Desktop Station with Flush Mic & 3" Speaker

OUR PART #  DTS2

Product Information:

Quam-Nichols' DTS2 desktop intercom station is a vandal-resistant, flush-mounted electret microphone/loudspeaker assembly with push-to-talk (PTT) button switch.  Loudspeaker baffle is 12 gage, brushed stainless steel with vandal-resistant internal baffle; enclosure is 16 gauge CRS with 'pin-in-torx' hardware.

Console finish: Black baked epoxy hybrid finish.

Intended Use: Indoor environment, simplex two-way communication using PTT microphone and internal, 'never full off' volume controlled, moisture-resistant loudspeaker.  Loudspeaker internally configured for either 8O or 25V systems.  3.5mm output jack allows use of low impedance headset (not supplied), bypassing loudspeaker function.  Pre-drilled holes in base for bolt-down applications.

Program Material: Voice and signal tones

Specifications:

  • Microphone Type: Unidirectional Electret
  • Sensitivity: -51 dBV/Pa ±4dB*
    *0 dB = 1V/Pa, 1kHz
  • Impedance: 600 ohms Nominal
  • Frequency Response: 180-12kHz, ±3dB
  • Supply Voltage: 1.5V, 0.5mA maximum draw
  • Loudspeaker Size: 3" Frame
  • Average Sensitivity: 87 dB, 1W/1M
  • Frequency Response: 150 Hz -10 kHz
  • Volume Control: -15 dB Maximum attenuation
  • Headset Jack: 3.5mm, mono output, disconnects 'never full off' speaker output when activated
  • Electrical Connections: Internal barrier strip
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.