(0)

Questions? Call Us:
866-334-8859

Vaddio WALLVIEWCCU-HD18-SDI
Camera Control System for WallViewHD-18w/SDI

OUR PART #  WALLVIEWCCU-HD18-SDI

Call for price! Not available online.
List Price: $6,295.00

Select model: (shipping times are approximate)

The WallVIEW CCU HD-18 SDI is built around the ClearVIEW HD-18 high definition pan/tilt/zoom camera, with 1/3", 1.3 megapixel CCD image sensor, a glass multi-element wide dynamic zoom lens (18x optical) a tally light and a 1.8 lux rating.

The WallVIEW CCU HD-18 SDI is capable of HD-SDI or SDI video outputs, which transmits 3Gb/s single link HD-SDI digital video resolutions up to 1080p over a single coax cable.

The Quick-Connect enables adjustment of color, gain, pedestal, gamma, chroma, knee and iris functions on the camera with the turn of a knob.

This system includes the Vaddio ClearVIEW HD-18, SDI card slot for the HD18, model HD-18 thin profile wall mount bracket and a Vaddio IR Remote Commander.

FEATURES

  • 1/3" CCD Image Device
  • 18x lens
  • 1.3 Megapixels - 720p (SMPTE 292M), 1080i (SMPTE 292M), 1080p (SMPTE 424M), 480i (SMPTE 259M) and 576i (SMPTE 259M)
  • HD-SDI and SD-SDI outputs
  • Red and blue gain, detail, pedestal, gamma, chroma, knee and iris controls
  • Heavy-duty wall mount bracket and power supply

SPECIFICATIONS

Vaddio ClearVIEW HD-18

  • Image Device: 1/3" CCD
  • Picture Elements: 1.3 Megapixels
  • HD-SDI Signals: HD: 1080p @ 60/50/30/25 Hz, 1080i @ 59.94/50 Hz, 720p @ 59.94/50Hz
  • SDI Signals: SD: 480i/29.97 or 576i/25 SD-SDI
  • Lens: 18x optical zoom
  • Focal Length: f=4.7 to 84.6mm
  • Horizontal Viewing Angle: 3.2 to 55.2 degrees (16:9)
  • Video S/N Ratio: >50dB
  • Invertible: Yes, with image flip control
  • Minimum Illumination: 1.8 lux
  • Control Protocol: VISCA
  • Serial Communication: RS-232 (9600 or 38,400)
  • Pan Range: +170 degrees to -170 degrees
  • Tilt Range: +90 degrees to -30 degrees
  • Pan/Tilt Speed: 0.25 degrees to 60 degrees/second
  • Preset Positions: 16 (internal), 6 recalled via IR remote
  • Weight: 5.8lbs

Quick-Connect CCU Interface

  • Connectors: Power Connector: 5.5mm OD x 2.5mm ID // Power RJ-45: Supplies 36V to EZIM HD-SDI // Control In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systems // Control Out RJ-45: RS-232 output to camera // Tally: 2-Pin Phoenix type spring cage connector // G/L Input: BNC Connector for Sync (not available on HD-18) // Video Outputs: Unused // Video RJ-45: Unused
  • Camera Select Switch: For Future Use - All switches should be in the down position
  • Video Adjustments: Detail, Red and Blue Gain, White Balance (Auto/Manual), Iris (Auto/Manual) Pedestal, Knee, Chroma and Gamma, with 3 scenes of storage
  • Cat5e Cable Distance: Up to 500' - control and power only
  • Power Supply: 36VDC, 2.78A
  • Dimensions: 1-RU Rack Mount - 1.75” H x 19” W x 6” D

Thin Profile Wall Mount HD-18

  • Materials: 12-gauge CRS with black powder coat paint
  • Dimensions: 5.125"H x 6.75"W x 10"D
  • Weight: Approx. 2.4lbs

HD-SDI Slot Card for HD-18 Camera

  • Power Jack: One (1) RJ-45, 36VDC used to Power HD-18 Camera and Slot Card with the Quick-Connect CCU
    over Cat5
  • HD-SDI Output: Two (2) Outputs on BNC Connectors (Carrier Class, Gold Finish Body and Contacts, Circuit Board
    Edge Mount - 3Gb/s compliant)
  • Slot Card Connection to Camera: One (1) 24-pin Self Guiding Blind Mating Interface Connector // Two (2) Captive, Spring Loaded, Retractable Thumb Screws
  • HD-SDI Transmitter: 3Gb/s HD-SDI/SDI transmitter, generating a SMPTE 424M, SMPTE 292M, SMPTE 259M-C compliant serial digital output signal with integrated low noise VCO and integrated cable driver (polarizing imaging array not included)
  • Dimensions: PCB: 4.75” W x 3.0”D x .063” Thick With Connectors and Mounting Plate: 5.875”W x 4.25”D

Click to download

Vaddio WALLVIEWCCU-HD18-SDI
Camera Control System for WallViewHD-18w/SDI

OUR PART #  WALLVIEWCCU-HD18-SDI

Product Information:

The WallVIEW CCU HD-18 SDI is built around the ClearVIEW HD-18 high definition pan/tilt/zoom camera, with 1/3", 1.3 megapixel CCD image sensor, a glass multi-element wide dynamic zoom lens (18x optical) a tally light and a 1.8 lux rating.

The WallVIEW CCU HD-18 SDI is capable of HD-SDI or SDI video outputs, which transmits 3Gb/s single link HD-SDI digital video resolutions up to 1080p over a single coax cable.

The Quick-Connect enables adjustment of color, gain, pedestal, gamma, chroma, knee and iris functions on the camera with the turn of a knob.

This system includes the Vaddio ClearVIEW HD-18, SDI card slot for the HD18, model HD-18 thin profile wall mount bracket and a Vaddio IR Remote Commander.

FEATURES

  • 1/3" CCD Image Device
  • 18x lens
  • 1.3 Megapixels - 720p (SMPTE 292M), 1080i (SMPTE 292M), 1080p (SMPTE 424M), 480i (SMPTE 259M) and 576i (SMPTE 259M)
  • HD-SDI and SD-SDI outputs
  • Red and blue gain, detail, pedestal, gamma, chroma, knee and iris controls
  • Heavy-duty wall mount bracket and power supply

SPECIFICATIONS

Vaddio ClearVIEW HD-18

  • Image Device: 1/3" CCD
  • Picture Elements: 1.3 Megapixels
  • HD-SDI Signals: HD: 1080p @ 60/50/30/25 Hz, 1080i @ 59.94/50 Hz, 720p @ 59.94/50Hz
  • SDI Signals: SD: 480i/29.97 or 576i/25 SD-SDI
  • Lens: 18x optical zoom
  • Focal Length: f=4.7 to 84.6mm
  • Horizontal Viewing Angle: 3.2 to 55.2 degrees (16:9)
  • Video S/N Ratio: >50dB
  • Invertible: Yes, with image flip control
  • Minimum Illumination: 1.8 lux
  • Control Protocol: VISCA
  • Serial Communication: RS-232 (9600 or 38,400)
  • Pan Range: +170 degrees to -170 degrees
  • Tilt Range: +90 degrees to -30 degrees
  • Pan/Tilt Speed: 0.25 degrees to 60 degrees/second
  • Preset Positions: 16 (internal), 6 recalled via IR remote
  • Weight: 5.8lbs

Quick-Connect CCU Interface

  • Connectors: Power Connector: 5.5mm OD x 2.5mm ID // Power RJ-45: Supplies 36V to EZIM HD-SDI // Control In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systems // Control Out RJ-45: RS-232 output to camera // Tally: 2-Pin Phoenix type spring cage connector // G/L Input: BNC Connector for Sync (not available on HD-18) // Video Outputs: Unused // Video RJ-45: Unused
  • Camera Select Switch: For Future Use - All switches should be in the down position
  • Video Adjustments: Detail, Red and Blue Gain, White Balance (Auto/Manual), Iris (Auto/Manual) Pedestal, Knee, Chroma and Gamma, with 3 scenes of storage
  • Cat5e Cable Distance: Up to 500' - control and power only
  • Power Supply: 36VDC, 2.78A
  • Dimensions: 1-RU Rack Mount - 1.75” H x 19” W x 6” D

Thin Profile Wall Mount HD-18

  • Materials: 12-gauge CRS with black powder coat paint
  • Dimensions: 5.125"H x 6.75"W x 10"D
  • Weight: Approx. 2.4lbs

HD-SDI Slot Card for HD-18 Camera

  • Power Jack: One (1) RJ-45, 36VDC used to Power HD-18 Camera and Slot Card with the Quick-Connect CCU
    over Cat5
  • HD-SDI Output: Two (2) Outputs on BNC Connectors (Carrier Class, Gold Finish Body and Contacts, Circuit Board
    Edge Mount - 3Gb/s compliant)
  • Slot Card Connection to Camera: One (1) 24-pin Self Guiding Blind Mating Interface Connector // Two (2) Captive, Spring Loaded, Retractable Thumb Screws
  • HD-SDI Transmitter: 3Gb/s HD-SDI/SDI transmitter, generating a SMPTE 424M, SMPTE 292M, SMPTE 259M-C compliant serial digital output signal with integrated low noise VCO and integrated cable driver (polarizing imaging array not included)
  • Dimensions: PCB: 4.75” W x 3.0”D x .063” Thick With Connectors and Mounting Plate: 5.875”W x 4.25”D

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.