(0)

Questions? Call Us:
800-356-5844

ETC/Elec Theatre Controls 450HID-150-A
150W 50° Source Four HID Ellipsoidal with Edison Connector

OUR PART #:  450HID-150-A

From their HID Ellipsoidal Series, ETC offers the 450HID-150-A, a Source Four® 70W HID 50° ellipsoidal that is black in color.
Learn More
Sale Price: $486.29
List Price: $1,138.00
You save 57%!
Write the first review.

We guarantee to match pricing on the products we sell for new, identical and immediately available products if you see them offered at a lower price. Please contact us if you find a lower price before purchasing.

Learn More

Low Price

Guaranteed

ETC/Elec Theatre Controls 450HID-150-A
Qty:
In Stock
Similar Products

From their HID Ellipsoidal Series, ETC offers the 450HID-150-A, a Source Four® 70W HID 50° ellipsoidal that is black in color. Its connector designation is a Parallel-blade U-ground connector, 120V. The ETC Source Four 70W HID is supplied with Philips CDM MasterColor 70W ceramic metal halide lamp, color frame and 6’ (1.8 meter) leads as standard.  Source Four HID fixtures are also supplied with a slot for either a drop-in iris or motorized pattern device. Six-foot, three-wire leads, no connector, are shipped as standard. This version comes in a black finish with a parallel-blade U-ground connector.

ETC 450HID-150-A Features:

  • 50° field angles
  • Ballast offers greater than 90% efficiency
  • Multi-faceted glass reflector
  • Rotating barrel ± 25%
  • Interchangeable lens tubes
  • Rugged die-cast aluminum construction
  • Three-plane stainless-steel shutter blade assembly

ETC 450HID-150-A Specifications:

PHYSICAL

  • Yoke mounted electronic ballast
  • Rugged, die cast aluminum construction
  • Rotating shutter assembly ± 25°
  • 20 gauge stainless steel shutters in a tri-plane assembly
  • Interchangeable lens tubes with smooth-running teflon guides provide nine user-selectable field angle options
  • Thermally insulated rear handle
  • High impact, thermally insulated knobs and shutter handles
  • Two accessory slots and a top mounted, gel frame retainer
  • Steel yoke with two mounting positions
  • Positive locking single-clutch fixture body
  • Slot for glass or stainless steel patterns
  • Wide accessory slot with sliding cover for motorized pattern devices or optional iris
  • UL and cUL Listed for damp locations

ELECTRICAL

  • 70W electronic ballast (yoke mounted)
  • Less than 10% Harmonic distortion
  • Greater than 95% Power Factor
  • 90% Ballast Efficiency
  • 120V Ballast:
    • 120V±10%, 60Hz
    • 0.7 Amps operating current*
  • Shiping Weight  21 lbs
  • Shiping Dimensions  11.5" x 11.5" x 26"
Drop In Iris for Source Four
ETC/Elec Theatre Controls 400RS Drop In Iris for Source Four
This accessory is a Drop In Iris for 5-90 degree Source Four light fixtures.
140.00

In Stock
Free Shipping Available
C-Clamp for ETC Fixtures, Black
ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black
This C-Clamp from ETC is useful for mounting and locking lighting fixtures to a grid pipe and includes an M12 thread screw for the fixture yoke.
20.00

In Stock
B Size Pattern Holder - Glass
ETC/Elec Theatre Controls 400PH-G B Size Pattern Holder - Glass
This Source Four accessory is a Glass Pattern Holder (B Size) for 5-90 Degree Source Four Fixtures.  Specifications: X = 2.75” Y = 3.75”
12.10

In Stock
30" Source Four Safety Cable in Black
ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black
This black safety is 30" in length and is a useful Source Four fixture accessory.Specifications: Cable is a 30" long, 1/8" diameter black wire rope cable with snap clamp fitted. The safety ratio of the cable is 5:1 The breaking load ...
10.00

In Stock
Pattern Holder - Size A
ETC/Elec Theatre Controls 400PH-A Pattern Holder - Size A
This Source Four accessory is an A size for 5º-90º Source Four fixtures.Specifications:  X = 3.25” Y = 3.75”
8.15

In Stock
Pattern Holder - Size B
ETC/Elec Theatre Controls 400PH-B Pattern Holder - Size B
This Source Four accessory is a B size Pattern Holder for 5º-90º Source Four fixtures.Specifications:  X = 2.75” Y = 3.75”
8.15

In Stock
Donut
ETC/Elec Theatre Controls 400DN Donut
This Source Four fixture accessory is a 6.25-inch donut that controls flare in template projections.NOTE: Use A-size pattern holder with Source Four for maximum pattern effectiveness.
6.85

In Stock
Color Frame for the Source Four
ETC/Elec Theatre Controls 400CF Color Frame for the Source Four
Product shown in image is for illustrative purposes only. Actual product may vary in appearance.Color Frame for the Source Four.
6.20

In Stock
Source Four Fixture Body
ETC/Elec Theatre Controls 400FB Source Four Fixture Body
The ETC 400FB is a Source Four fixture body without a lens tube and comes with an unterminated power cord.
330.00

Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available
Source Four Lens Tube, 50 degree, Black
ETC/Elec Theatre Controls 450LT Source Four Lens Tube, 50 degree, Black
This replacement or spare 50 degree lens tube assembly with lens installed is for Source Four Ellipsoidal fixtures and comes with a black finish.NOTE: Source Four lens tubes ship with color frames.
175.00

Usually ships in 7-14 business days.
Free Shipping Available
Black Top Hat, 5" Tube
ETC/Elec Theatre Controls 400TH Black Top Hat, 5" Tube
This accessory is a black Top Hat with a 5" tube that intended to be used with 19-50 degree Source Four and Source Four jr fixtures.
22.00

Usually ships in 7-14 business days.
Need it sooner? Call us!
Black Half Hat
ETC/Elec Theatre Controls 400HH Black Half Hat
This Source Four accessory is a black Half Hat that measures 7x7x6 inches. Like the Top Hat this unit helps to control and reduce flare but from one side only.
22.00

Usually ships in 7-14 business days.
Need it sooner? Call us!

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.