The Vaddio WallVIEW PRO EagleEye is designed for use with the Polycom® EagleEye high definition pan/tilt/zoom camera.
Learn More
Our Price: $1,507.50
List Price: $1,675.00
You save 10%!
Write the first review.
Usually ships in 7-14 business days.
Need it sooner? Call us!

Related Products

The Vaddio WallVIEW PRO EagleEye is designed for use with the Polycom® EagleEye high definition pan/tilt/zoom camera. The WallVIEW PRO’s active electronics deliver high definition video up to 500’ (152.4m) over standard Cat. 5 cable from the EagleEye PTZ camera (not included). The allVIEW PRO EagleEye system includes the EZCamera Interface Module (EZIM) and Quick-Connect PRO (QCP) interface, along with the Vaddio Thin Profile EagleEye Wall Mount and EZIM HD Break-out cable. The WallVIEW PRO EagleEye uses high speed differential signaling (HSDS) for the video signals which gives this system high definition video quality over longer Cat5 cabling distances and the ability to adjust the signal depending on the length of the cabling used.

The WallVIEW PRO EagleEye has many new features including a four position distance adjustment for Cat5 cabling, Y-Gain adjustment for cable length compensation, IR forwarding, 1-RU rack mount QCP interface and the small EZIM, which is intended to be paired with the Polycom EagleEye HD PTZ camera provided with the Polycom HDX codecs. Like all Vaddio WallVIEW systems, the system comes with the Thin Profile Wall Mount and mounting hardware.


  • Distances up to 500' with HSDS - The WallVIEW PRO EagleEye system uses high speed differential signaling (HSDS), which allows high definition video signals to be conveyed over longer Cat5 cabling distances.
  • EZCamera Interface Module - The EZCamera Interface Module is a small camera interface module that mounts behind the camera and is a universal interface for several HD or SD PTZ cameras available today. The EZIM uses a multi-pin connector and cable assemblies for maximum flexibility.
  • Quick-Connect PRO (QCP) - The 1-RU QCP has (high definition) analog component video outputs (Y, Pb, Pr) for 1080i and 720p high resolution signals on BNC connectors.
  • IR Forwarding Feature - The IR Forwarding feature allows IR signals from the Polycom remote to be sent through the EZIM/QCP to the codec's IR interface allowing maximum design flexibility.
  • Distance Adjustments - Because WallVIEW PRO EagleEye uses active electronics, there are four cable length adjustments (<100', 200', 300', 400,+), which equalize the length of the Cat5 twisted pairs and vastly improve the HD video performance.
  • Luminance Gain Adjustment - A luminance gain control (Y-gain) is also provided which allows for enhanced control and fine tuning of the video signals when longer Cat5 cabling runs are required.
  • Superior Power Regulation - The WallVIEW PRO EagleEye uses the PowerRite 36V power supply, which is key to providing the electrical current that the larger PTZ camera motors require to operate properly. The EZIM regulates the power to run the system at optimum efficiency.
  • Thin Profile Wall Mount Included - With each system, a Thin Profile Wall Mount Bracket is provided. The Wall Mount can be attached to the wall with anchors or mounted directly to a standard 2-gang wall box. There are pre-drilled and tapped mounting holes for the EZCamera Interface Module on the back of the Wall Mount to make installation easy.
  • Complete System - The WallVIEW PRO EagleEye comes complete and includes everything the installer needs to accomplish a professional installation. Three Cat5 cable runs for Power, Video and Control are required to complete the installation.


Quick-Connect PRO Universal Interface (QCP)

  • Connectors: Power Connector: 5.5mm OD x 2.5mm ID // Power RJ-45: Supplies 36V to EZCamera Interface Module Regulator
    // IR: 2-Pin Phoenix type spring cage connector // Video Outputs: BNC Connectors for HD Analog Component (Y,PB,PR) // Video RJ-45: Transports HD video from camera
  • Camera Select Switch: IR Modes: IR Forwarding for use with Polycom HDX Codec
  • Video Adjustments: Y-Gain (luminance gain) for fine tuning over longer cable distances // Distance Compensation: 100’, 200’, 300’, 400’+
  • Cat5 Cable Distance: Up to 500'
  • Power Supply: 36VDC, 2A
  • Dimensions: 1-RU rackmount - 1.75" x 19" x 6"

EZCamera Interface Module (EZIM)

  • Connectors: Four (4) RJ-45 Connectors // One DB-25 for Power, Video, Control & IR
  • Cable Assembly: For Polycom EagleEye: DB-25M to HDCI-M
  • Power Regulator: Supplies 12VDC to Cameras
  • Dimensions: 3"x4.5"x 1.2"

Thin Profile Wall Mount EagleEye

  • Materials: 12-gauge CRS with Black Powder Coat Paint
  • Dimensions: 6.25" x 10.9" x 7.25"
  • Weight: 4.6lbs



To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information