Crestron TTK-MP/MPC/IPAC-BT Tabletop Kit for MPC3-302, MP-B10, & MP-B20 Series

Attain a sleek and convenient tabletop enclosure for an MPC3-302 or MP-B10/B20 Series Media Presentation Button Panel by using the TTK-MP/MPC/IPAC Series Tabletop Kit. When installed in the enclosure, the device’s front panel is angled at 45 degrees. The complete assembly may be placed on any flat, level surface, with the alternative to attach it permanently to the surface, using screws.

Permanently mount the enclosure but retain the ability to optimally rotate the unit by using an optional swivel mount accessory (sold separately). Use optional limit screws to customize the swivel range, with a maximum of 330-degree rotation allowed. Install the swivel mount on any flat table, desk, or counter top surface with a thickness of 1 inch (25 mm) minimum to 1 3/8 inch (35 mm) maximum.

To achieve a very clean and cordless appearance, wiring may be passed out the rear of the enclosure through a grommet and strain relief, or routed through the bottom. The rear wire opening can accommodate a single cable up to 1/4 inch (6.4 mm) diameter such as Crestron Cresnet® or CAT5e. The bottom opening measures 29/32 inch (23 mm) diameter, while the optional swivel mount can accommodate a bundle of wires up to 11/16 inch (17 mm) diameter.

TTK-MP/MPC/IPAC Features:

• Converts the MPC3-302 Series into a stylish tabletop controller
• Also compatible with MP-B10 and MP-B20 button panels
• Provides a 45° fixed operating angle
• Allows for permanent mounting
• Optional swivel mount kit enables 330° rotation when mounted
• Provides the choice of rear or bottom wire exit

TTK-MP/MPC/IPAC Specifications:

• Housing: Plastic enclosure, black or white; 45° fixed operating angle
• Mounting: Freestanding, surface mount, or swivel mount (Swivel Mount Kit sold separately)
• Dimensions:
  • Height: 3.82 in (97 mm); 3.91 in (100 mm) with swivel mount
  • Width: 6.71 in (171 mm)
  • Depth: 4.96 in (126 mm); 4.44 in (113 mm) without rear wire grommet
• (Dimensions shown are for a complete assembly with the controller or button panel device installed.)