(0)

Questions? Call Us:
866-334-8859

Rode LAVALIER-RODE
Lavalier Microphone (Black)

OUR PART #  LAVALIER-RODE

Our Price: $249.00
List Price: $375.00
You save 34%! (Low Price Guarantee)
In Stock

Recommended Accessories

RØDE's LAVALIER comes with a water-resistant pop filter, mini-furry for high wind protection - both of which ensure quality recordings in adverse environments.  This mic also includes an anti-trauma, water-resistant case that provides a rugged and secure protection for the microphone, cable and accessories.

Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system (adapters sold spearately) which provides seamless integration between the HS1-P and a wide range of wireless systems.

Features:

  • Ø4.5 mm (Ø0.177”) miniature microphone
  • Corrosion-resistant stainless steel
  • Low handling noise
  • Gold plated connections

Additional Accessories:

  • Shielded, detachable Kevlar® reinforced cable
  • Lapel-style cable management clip
  • Adjustment tools
  • Sanitary cleansing wipes

Specifications:

  • Acoustic Principle: Permanently Polarised Condenser
  • Directional Pattern: Omni-directional
  • Frequency Range: 60 Hz - 18 kHz
  • Output Impedance: 3 kOhm Typical
  • Signal To Noise: Ratio 69 dB
  • Equivalent Noise: 25 dBA SPL (per IEC651)
  • Clipping SPL: 110 dB
  • Maximum Output: 189 mV*
  • Sensitivity: -33.5 dB re 1 V/Pa (1.6 mV @ 94 dB SPL) ± 3 dB @ 1 kHz
  • Dynamic Range: 85 dB Typical*
  • Power Requirements:
    - Min 2 V ~Max 5 V through RØDE wireless adaptors
    - P48 through RØDE XLR adaptor
  • Output Connection: RØDE MiCon™ connector

*Calculated from maximum SPL peak before clipping.  All measurements are calculated when powered at 5 V or P48 (RØDE XLR adaptor).

Wireless Adapter for Audio Technica UniPak Wireless Body Pack SystemsRode MiCon-4 Wireless Adapter for Audio Technica UniPak Wireless Body Pack Systems

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-4 is a wireless adapter for use with the following Audio Technica UniPak wireless body pack systems: 1800 Series 2000 Series 3000 Series

In Stock

Our Price:$27.00List Price: $43.00You save 37%!

Wireless Adapter for Shure Wireless SystemsRode MiCon-3 Wireless Adapter for Shure Wireless Systems

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-3 is a wireless adapter for use with the following Shure wireless systems: UR1 UR1M ULX1 SLX1 PGX1 PG1

In Stock

Our Price:$23.00List Price: $37.00You save 38%!

Wireless Adapter for Sennheiser SK500, SK300G3, SK100G3, SK500G2, SK300G2, SK2-FreeportRode MiCon-1 Wireless Adapter for Sennheiser SK500, SK300G3, SK100G3, SK500G2, SK300G2, SK2-Freeport

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-1 connector works with the following Sennheiser wireless systems: SK500 SK300G3 SK100G3 SK500G2 SK2-Freeport

In Stock

Our Price:$18.00List Price: $29.00You save 38%!

3.5mm Stereo Mini Jack Adapter for Wireless Mic SystemsRode MiCon-2 3.5mm Stereo Mini Jack Adapter for Wireless Mic Systems

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-2 is a 3.5 mm stereo mini jack connector that is for use with wireless mic systems that have a 1V minimum power supply.

In Stock

Our Price:$18.00List Price: $29.00You save 38%!

for HS1, Pinmic, Lavalier MicsRode 3M MiCon Cable for HS1, Pinmic, Lavalier Mics

3 m cable for use with MiCon adapters, compatible wireless systems, and Rode's HS1, Lavalier, or Pinmic microphones.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$39.00List Price: $62.00You save 37%!

48V Phantom Power Adapter with 3-Pin XLR ConnectorRode MiCon-5 48V Phantom Power Adapter with 3-Pin XLR Connector

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-5 is a 48V phantom power adapter with a 3-pin XLR connector that is designed for use with wireless systems.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$27.00List Price: $43.00You save 37%!

Rode LAVALIER-RODE
Lavalier Microphone (Black)

OUR PART #  LAVALIER-RODE

Product Information:

RØDE's LAVALIER comes with a water-resistant pop filter, mini-furry for high wind protection - both of which ensure quality recordings in adverse environments.  This mic also includes an anti-trauma, water-resistant case that provides a rugged and secure protection for the microphone, cable and accessories.

Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system (adapters sold spearately) which provides seamless integration between the HS1-P and a wide range of wireless systems.

Features:

  • Ø4.5 mm (Ø0.177”) miniature microphone
  • Corrosion-resistant stainless steel
  • Low handling noise
  • Gold plated connections

Additional Accessories:

  • Shielded, detachable Kevlar® reinforced cable
  • Lapel-style cable management clip
  • Adjustment tools
  • Sanitary cleansing wipes

Specifications:

  • Acoustic Principle: Permanently Polarised Condenser
  • Directional Pattern: Omni-directional
  • Frequency Range: 60 Hz - 18 kHz
  • Output Impedance: 3 kOhm Typical
  • Signal To Noise: Ratio 69 dB
  • Equivalent Noise: 25 dBA SPL (per IEC651)
  • Clipping SPL: 110 dB
  • Maximum Output: 189 mV*
  • Sensitivity: -33.5 dB re 1 V/Pa (1.6 mV @ 94 dB SPL) ± 3 dB @ 1 kHz
  • Dynamic Range: 85 dB Typical*
  • Power Requirements:
    - Min 2 V ~Max 5 V through RØDE wireless adaptors
    - P48 through RØDE XLR adaptor
  • Output Connection: RØDE MiCon™ connector

*Calculated from maximum SPL peak before clipping.  All measurements are calculated when powered at 5 V or P48 (RØDE XLR adaptor).

Wireless Adapter for Audio Technica UniPak Wireless Body Pack SystemsRode MiCon-4 Wireless Adapter for Audio Technica UniPak Wireless Body Pack Systems

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-4 is a wireless adapter for use with the following Audio Technica UniPak wireless body pack systems: 1800 Series 2000 Series 3000 Series

In Stock

Our Price:$27.00List Price: $43.00You save 37%!

Wireless Adapter for Shure Wireless SystemsRode MiCon-3 Wireless Adapter for Shure Wireless Systems

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-3 is a wireless adapter for use with the following Shure wireless systems: UR1 UR1M ULX1 SLX1 PGX1 PG1

In Stock

Our Price:$23.00List Price: $37.00You save 38%!

Wireless Adapter for Sennheiser SK500, SK300G3, SK100G3, SK500G2, SK300G2, SK2-FreeportRode MiCon-1 Wireless Adapter for Sennheiser SK500, SK300G3, SK100G3, SK500G2, SK300G2, SK2-Freeport

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-1 connector works with the following Sennheiser wireless systems: SK500 SK300G3 SK100G3 SK500G2 SK2-Freeport

In Stock

Our Price:$18.00List Price: $29.00You save 38%!

3.5mm Stereo Mini Jack Adapter for Wireless Mic SystemsRode MiCon-2 3.5mm Stereo Mini Jack Adapter for Wireless Mic Systems

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-2 is a 3.5 mm stereo mini jack connector that is for use with wireless mic systems that have a 1V minimum power supply.

In Stock

Our Price:$18.00List Price: $29.00You save 38%!

for HS1, Pinmic, Lavalier MicsRode 3M MiCon Cable for HS1, Pinmic, Lavalier Mics

3 m cable for use with MiCon adapters, compatible wireless systems, and Rode's HS1, Lavalier, or Pinmic microphones.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$39.00List Price: $62.00You save 37%!

48V Phantom Power Adapter with 3-Pin XLR ConnectorRode MiCon-5 48V Phantom Power Adapter with 3-Pin XLR Connector

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-5 is a 48V phantom power adapter with a 3-pin XLR connector that is designed for use with wireless systems.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$27.00List Price: $43.00You save 37%!

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.