(0)

Questions? Call Us:
866-334-8859

Schoeps CMC-6UNI-XT
48V or 12V PH w/SG20/NICKEL

OUR PART #  CMC-6UNI-XT

Selected Model Price: $939.00
(Low Price Guarantee)
Select model: (shipping times are approximate)

A Schoeps CMC6 mic preamp (which forms the body of the microphone), includes SG20 stand clip.

REQUIRES A CAPSULE, SOLD SEPARATELY

The CMC 6 is designed for standard 48- and 12-Volt phantom powering. Its circuitry recognizes the supply voltage and adjusts itself automatically. Its performance characteristics remain essentially the same either way; mainly, the difference is that the current drawn at 12 Volts is greater than at 48 Volts. However, the 12-Volt mode consumes less power and might be preferred for battery-powered recording.


The microphone amplifier provides the electrostatic charge which the capsule requires in order to produce a signal. Since only a miniscule amount of current is contained in this signal, amplification of the current is required. To avoid interference to the signal on the way from the microphone to the input of the mixer or preamp, the signal is conveyed at low impedance and in balanced form. The CMC 6 amplifier offers a symmetrical, transformerless, direct-coupled Class A output stage with low impedance, low distortion, and high freedom from interference.

Features

  • Nickel finish
  • Flat frequency response
  • Extremely low noise and distortion
  • Balanced, very low impedance output
  • Can be used with very long cables
  • Well-protected against RFI
  • For use with 12V or 48V phantom powering

Specifications

  • Powering voltage: 12 / 48 V
  • Current consumption with 12V: 8 mA
  • Current consumption with 48V: 4 mA
  • Impedance (at 12 V): 25 O
  • Impedance (at 48 V): 35 O
  • Low-cut frequency: 20Hz
  • Maximum output voltage: 1V
  • Minimum recommended load impedance: 600O
  • Length: 4.57"
  • Diameter .79"
  • Weight: .13lbs
  • Surface finish matte gray (g) or nickel (ni)

[Shown above with matte grey finish]

Click to download

Schoeps CMC-6UNI-XT
48V or 12V PH w/SG20/NICKEL

OUR PART #  CMC-6UNI-XT

Product Information:

A Schoeps CMC6 mic preamp (which forms the body of the microphone), includes SG20 stand clip.

REQUIRES A CAPSULE, SOLD SEPARATELY

The CMC 6 is designed for standard 48- and 12-Volt phantom powering. Its circuitry recognizes the supply voltage and adjusts itself automatically. Its performance characteristics remain essentially the same either way; mainly, the difference is that the current drawn at 12 Volts is greater than at 48 Volts. However, the 12-Volt mode consumes less power and might be preferred for battery-powered recording.


The microphone amplifier provides the electrostatic charge which the capsule requires in order to produce a signal. Since only a miniscule amount of current is contained in this signal, amplification of the current is required. To avoid interference to the signal on the way from the microphone to the input of the mixer or preamp, the signal is conveyed at low impedance and in balanced form. The CMC 6 amplifier offers a symmetrical, transformerless, direct-coupled Class A output stage with low impedance, low distortion, and high freedom from interference.

Features

  • Nickel finish
  • Flat frequency response
  • Extremely low noise and distortion
  • Balanced, very low impedance output
  • Can be used with very long cables
  • Well-protected against RFI
  • For use with 12V or 48V phantom powering

Specifications

  • Powering voltage: 12 / 48 V
  • Current consumption with 12V: 8 mA
  • Current consumption with 48V: 4 mA
  • Impedance (at 12 V): 25 O
  • Impedance (at 48 V): 35 O
  • Low-cut frequency: 20Hz
  • Maximum output voltage: 1V
  • Minimum recommended load impedance: 600O
  • Length: 4.57"
  • Diameter .79"
  • Weight: .13lbs
  • Surface finish matte gray (g) or nickel (ni)

[Shown above with matte grey finish]

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.