Product Overview
The TOA A9060SM2 mixer amplifier provides an all-in–one solution, combining a mixer with DSP featuring 10 band parametric EQ, compressor, 4 priority levels of ducking, power amplification, auto-mixing, 8 module ports, and control options for phone paging and noise-sensing. Optional modules can be added to maximum of 8 inputs x 8 outputs.
The M2 series adds remote-control functionality, an enhanced GUI interface and improved serial communication. Programming software is included. It is backed by TOA's five-year warranty. It accepts the same modules used in the original 9000 series as well as some modules unique to the M2 series.
Includes:
- Power cord (2 m (6.56 ft)) x1
- Rack mounting bracket x2
- Bracket mounting screw x4
- Blank panel x7
- Blank panel mounting screw x14
- Removable terminal plug (3-pin) x1
- Removable terminal plug (7-pin) x1
- Removable terminal plug (14-pin) x1
- CD x1
Features:
- Modular Digital Matrix Mixer/ Amplifiers for a multitude of applications including audio-visual, zone paging, room combining and more
- Easy to Configure and Operate
- Exceptional Audio Quality
- 24-bit, 48kHz sampling
- Ultra-Low Distortion –0.0008%
- Minimum Latency -1.1ms (D-001T input to output)
- Modular Mixer — up to 8 mic / line inputs and 8 outputs
- Dual Channel Digital Signal Processor (DSP):
- 10-Band Parametric EQ
- High and Low Pass Filters
- Compressor
- Loudness Contour
- Bass and Treble
- Delay (MIXER mode)
- TOA Speaker EQ Presets
- Single Channel Power Amp
- Dual Modes (MIXER and MATRIX) — two separate feature sets to suit both simple mixing and complex multi-zone distribution applications
- Telephone Zone Paging — access up to eight zones with optional ZP-001T module
- Automatic Mic Mixing — automatically adjusts output level based on the total number of open microphones (NOM)
- Ambient Noise Control — automatically increase or reduce output levels in response to changes in ambient noise
- Multi-function Display allows programming and operation without a PC
- Rack-mount Kit Included (2RU)
Specifications:
- Power Source: 120VAC, 60Hz
- Power Consumption: 100W
- Rated Output: 60W
- Audio Input: Max. 8 channels, modular construction (modules optional)
- Power amplifier input: 0dB, 10kΩ, RCA pin jack
- Audio Output:
- Preamplifier output 1: 0dB, 300Ω, unbalanced, RCA pin jack
- Preamplifier output 2: 0dB, 600Ω, balanced, removable terminal block (3 pins)
- Speaker output: Removable terminal block (7-pin)
- (Direct) 60W, 4Ω, unbalanced
- (Transformer) 60W, 8Ω 25V & 70V, balanced
- Module Slot:
- Analog input (slot 1 - 8): -10dB, 10kΩ, unbalanced
- Digital input (slot 1 - 4): 24-bit / 48kHz
- MIX output (slot 1 - 8): -14dB, 330Ω (CH 1 prefader output), unbalanced
- Digital output (slot 5 - 7): 24-bit / 48kHz
- Power supply (slot 1 - 8): +24V, -24V, +6VDC
- Digital Audio Signal Reference Level: -20dBFS
- Power Bandwidth:
- (Direct) 20Hz - 20kHz, 0.02% THD
- (Transformer) 50Hz - 20kHz, 0.5% THD
- Frequency Response:
- Power amplifier section: 20Hz - 20kHz, +0, -1dB
- Analog input module to speaker output: 20Hz - 20kHz, +1, -3dB
- Total Harmonic Distortion:
- Power amplifier section: 0.008% (22kHz LPF, 1kHz, rated power)
- Analog input module to speaker output: 0.008% (22kHz LPF, 1kHz, rated power)
- S / N Ratio: At Input short, 20Hz - 20kHz, set to ALL FLAT or OFF setting
- Output volume min.: 90dB (preamplifier output)
- Output volume max.: 61dB (preamplifier output, Input 1 volume: 0dB, Other Inputs: OFF)
- Power amplifier section: 110dB
- Cross-Talk: 64dB or more (@ 20kHz)
- Tone Control:
- Bass: ±12dB (@ 100Hz)
- Treble: ±12dB (@ 10kHz)
- Parametric Equalizer: 10 bands, Frequency: 20Hz - 20kHz, 31 points, Variable range: ±12dB, Ω: 0.3 - 5
- Speaker Equalizer: 10 bands (setup software has 30 TOA speaker presets)
- High-pass Filter: -12dB / oct, Variable frequency range: 20Hz - 20kHz, 31 points
- Low-pass Filter: -12dB / oct, Variable frequency range: 20Hz - 20kHz, 31 points
- Compressor Depth: 1 - 5
- Delay: 0 - 40 ms (1ms steps), maximum 40ms (CH 1 + CH 2), mixer mode only
- Scene / Event Memory: 32
- Auxiliary Function: Key lock function
- Control:
- Input / Output RS-232C(*2), D-sub connector (9 P, female)
- Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3VDC, short-circuit current: 1mA or less, removable terminal block (14-pin)
- Control output: 4 outputs, open collector output, withstand voltage: 27VDC, control current: 50mA, removable terminal block (14-pin)
- Remote volume: 2 channels, connect a 10kΩ / linear taper variable resistor or input the DC voltage of 0 to +10V, removable terminal block (14-pin)
- Operating Temperature: -10℃ to +40℃ (14°F to 104°F)
- Operating Humidity: 35% to 80% RH (no condensation)
- Finish:
- Panel: Aluminum, hair-line, black
- Case: Surface-treated steel plate, black, paint
- Dimensions: 420 (W) × 107.6 (H) × 355mm (D) - (16.54" × 4.24" × 13.98")
- Weight: 11kgs (24.25lbs)
