Beyerdynamic MC910 Omnidirectional Condenser Microphone with Switchable Pre-Attenuation

The Beyerdynamic MC 910 true condenser microphone provides an enormous versatility due to its neutral sound and accurate design. The features of the MC 910 include the wide frequency response of 30-20,000 Hz and a signal-to-noise ratio of 69dB.

The MC 910 is suitable as a main microphone for stereo and surround recordings as well as close micing of voice or individual instruments. Its subtle treble boost provides an open and natural sound even with larger distances. It also compensates for off axis high frequency attenuation of the omnidirectional capsule. Due to the switchable pre-attenuation of 15 dB it is suitable for use with very high sound pressure levels. The switchable low-cut filter with 6dB/octave below 250Hz provides a reproducible audio variant.

With the WS 101 wind shield, the MC 910 can be used for speech and vocals. The MC 910 is phantom powered (11-52V) and therefore suitable for live or studio applications.

Beyerdynamic MC 910 Features:

• Omnidirectional polar pattern
• Switchable pre-attenuation -15dB
• Slight treble boost
• Phantom Power 11-52V

Beyerdynamic MC 910 Specifications:

• Transducer Type: True condenser
• Operating Principle: Pressure
• Frequency Response: 30-20,000 Hz
• Polar Pattern: Omnidirectional
• Open Circuit Voltage at 1kHz (0dB = 1V/Pa): 25 mV/Pa = -32dBV
• Nominal Impedance: 180 ohms
• Load Impedance: 1000 ohms
• Max. SPL at 1kHz: 127dB; with pre-attenuation: 142dB
• Signal-to-Noise Ratio rel. to 1Pa: 69dB
• A-weighted Equivalent SPL: 18dB
• Low-Cut Filter: Switchable, 6dB/octave at 250Hz
• Power Supply: 11-52V phantom power
• Current Consumption: 4.6mA
• Connector: 3-pin XLR male
• Dimensions: 128mm length x 21mm diameter
• Weight without cable: 115g