Questions? Call Us:

Radio Design Labs RM-MP12A
Audio Monitor Panel, 12 Line or Speaker Inputs


Each RM-MP12 input may be individually calibrated for unbalanced consumer, balanced professional, 8 Ohm speaker line or constant voltage speaker lines.
Learn More
Our Price: $736.20
List Price: $1,055.16
You save 30%!
Write the first review.

Full Compass offers free ground shipping on thousands of stock and non-stock (special order) items for orders placed on this web site and shipping in the continental US (48 states).

Learn More

Free Shipping


We guarantee to match pricing on the products we sell for new, identical and immediately available products if you see them offered at a lower price. Please contact us if you find a lower price before purchasing.

Learn More

Low Price


Radio Design Labs RM-MP12A
Usually ships in 7-14 business days.
Need it sooner? Call us!

Similar Products

Each RM-MP12 input may be individually calibrated for unbalanced consumer, balanced professional, 8 Ohm speaker line or constant voltage speaker lines. There is a variable intensity LED on the front panel to show audio presence for each input. If the RM-MP12 is set to the interlocking operating mode, front panel pushbuttons select one of the twelve inputs to feed the calibrated meter, front panel speaker (or external speaker if connected) and headphone jack.

In the mixing mode, the buttons allow the use to mix multiple sources. The front panel volume knob controls the audio level of the front panel headphone jack, front panel speaker, external speaker output and variable line level (+4 dBu) rear panel output. A separate fixed line level output is provided.

NOTE: Radio Design Labs' PS-24KS power supply is NOT included but is required in order to power this product.  Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.


  • Twelve Individually Selectable Audio Inputs
  • Front Panel Speaker and Headphone Jack
  • Front Panel VCA Control for Headphone and Speaker Output Levels
  • Internal 4.5 W RMS Power Amplifier and Speaker
  • Selectable Operating MODE Provides Interlocking Source Selection or Mixing Multiple Sources
  • LED Above Each Button to Show Selected Source
  • VU Ballistic LED Above the Button for Each Input
  • Calibrated Front Panel Meter Display
  • Audio Inputs and Outputs on Detachable Terminal Blocks


  • Inputs (12): +4 dBu, 25 V, 70.7 V, 100 V (set by rear-panel switches)
  • Input Level: -11 dBu to +9 dBu (+4 dBu input) 25 V, 70.7 V, 100 V (calibrated with gain trim set fully counter-clockwise)
  • Headroom: > 18 dB (above calibrated input level)
  • Gain: 0 dB to 20 dB (Adjustable for speaker-level input, 25-turn trim potentiometer) -5 dB to 15 dB (+4 dBu input)
  • Frequency Response: 10 Hz to 20 kHz (+/-0.25 dB)
  • THD+N: < 0.010% (20 Hz to 20 kHz)
  • Intermodulation Distortion: < 0.025% (20 Hz to 20 kHz)
  • Channel to Channel Crosstalk: < -80dB (10Hz to 20 kHz)
  • Residual Noise: < -80 dB (Channel ON; referred to +4 dBu)
  • OFF Attenuation: > 80 dB (10 Hz to 20 kHz)
  • Indicators per Channel (2): Red channel active LED above button; Variable intensity audio level LED for each input (minimum intensity at -15 dB, maximum intensity at 0 dB)
  • CMRR: > 75 dB (50 to 120 Hz)
  • Outputs (4):
    150 Ohms, +4 dBu fixed level (balanced or unbalanced via plug-in terminal block)
    150 Ohms, +4 dBu variable level (balanced, controlled by front-panel volume knob)
    4.5 W RMS external speaker connection (use of external speaker disconnects internal speaker) 100 mW ¼-inch stereo headphone jack
  • Power Requirement: GROUND-REFERENCED, 24 to 33 Vdc @ 700 mA
  • Mounting: Standard 19” Rack-mount; 1 Rack Unit (RU)
  • Dimensions: 1.75" H x 5.35" D (4.4 x 13.6 cm)
  • Ambient Operating Environment: 0° C to 55° C
24V @ 1000mA Power Supply
Radio Design Labs PS24KS 24V @ 1000mA Power Supply
Typical Performance: Input: 100 to 240 VAC Output: 24 Vdc, 1 A (UL, CSA) Dimensions: 1.80" x 3.51" x 1.55" (4.6  x 8.9 x 3.9 cm) Efficiency: ENERGY STAR Level IV
30.25 40.47 25

In Stock
2RU Utility Rack Chassis
Radio Design Labs RK-2U 2RU Utility Rack Chassis
Radio Design Labs' RK-2U is a versatile equipment rack designed to mount to any flat surface or to sit on a shelf.  The rack holds standard 19" rack mounted equipment 2RU in height.  Threads for either US #10-32 or metric M5 ...
157.39 210.54 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available

Click to download

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.