(0)

Questions? Call Us:
866-334-8859

QSC K10
10" 2-Way 1000 Watt Powered PA Speaker

OUR PART #  K10-QSC

Our Price: $699.99
List Price: $909.99
You save 23%! (Low Price Guarantee)
In Stock

Recommended Accessories
The QSC K10 is one of the best 10” powered PA speakers on the market. The K10 2-way loudspeaker features XLR and 1/4” TRS mic/line level inputs. QSC K series speakers offer a fly-mount optional feature and rugged ABS enclosures.

QSC's K10 is a lightweight powered loudspeaker that features a 1000 Class D power module and is fitted with an identical woofer and a 1.75" HF transducer.  The K10 also features auto-standby mode, XLR & 1/4" TRS mic/line level ins, RCA phono ins, direct outs on each channel, a balanced out for daisy-chaining up to three sources and extensive DSP processing.  EQ settings for both the high-freq. and low-freq. transducers are adjustable on each unit.  LEDs can be set to show when the unit is on or when its clip limiter has been engaged.  The extended bass LF setting allows for integration of an external subwoofer into the sound system.

Features fly-mount options as well as the Tilt-Direct™ pole cup mounting system for a 7.5° downward tilt for better sound coverage.  Multiple units can be daisy-chained for total gain control from a single remote pot.  Also features a steel grille and is housed in an ABS enclosure.

QSC K10 Features:

  • 10” Woofer; 1.75” diaphragm compression driver
  • 90° Nominal coverage angle
  • Maximum SPL 129 dB peak
  • 1000-watt continuous Class D power modules in all models
  • Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs,(three audio input sources); two direct channel outputs and single summed balanced output
  • Extensive DSP enhances system performance:
    • DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
    • Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
    • DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
    • GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
  • Attractive and professional appearance
  • Rugged ABS enclosures
  • Functions as a monitor wedge
  • 16-gauge powder coated steel grille
  • Comfortable ergonomic handles
  • 35 mm pole sockets with Tilt-Direct™
  • M10 rigging points
  • Eyebolt and yoke mount accessories available(sold separately)

QSC K10 Specifications:

  • Configuration: Multipurpose 2-way
  • Transducers: 
    • Low-frequency: 10" cone transducer
    • High-frequency: 1.75" diaphragm compression driver
  • Frequency Response (-6 dB): 60 Hz – 18 kHz
  • Frequency Range (-10 dB): 56 Hz – 20 kHz
  • Nominal Coverage (6 dB): 90° conical
  • Maximum SPL: 129 dB peak
  • Amplifier Specifications:
    • RMS Power Output: 1,000 Watts continuous Class D (500 W LF, 500 W HF)
    • Peak Power Output: 2,000 Watts
    • Input Impedance:
      • XLR / 1/4": 40 kOhms balanced / 20 kOhms unbalanced
      • XLR / 1/4" MIC Mode: 2,260 Ohms balanced
      • RCA: 10 kOhms
    • Controls:
      • Power
      • Gain A
      • Gain B
      • Mic/Line
      • LF Mode (Ext Sub/Norm/DEEP)
      • HF Mode (Flat/Vocal Boost)
      • Front LED (On/Off/Limit)
    • Indicators:
      • Power
      • Signal A
      • Signal B
      • Standby
      • Limit
      • Mic
    • Connectors:
      • Two (2) Balanced Female XLR / 1/4" Line/Mic level inputs
      • Two (2) Balanced Male XLR Full-Range Line Level ouputs
      • Balanced Male XLR "Mix" Output
      • Stereo RCA Line Level Input
      • Remote Gain Control
      • Locking IEC Power Connector
    • Amplifier Protection: Thermal limiting, output overcurrent, over temperature muting, Guard Rail
    • Transducer Protection: Thermal limiting, excursion limiting
    • AC Power Consumption:
      • 100 VAC, 2.3 A
      • 120 VAC, 2.01 A
      • 230 VAC, 1.13 A
  • Enclosure Specifications:
    • Material: Impact Resistant ABS
    • Finish: Black Paint
    • Grille: Rugged powder-coated steel
    • Dimensions (HxWxD): 20.4" x 12" x 11.8" (519mm x 320mm x 300mm)
    • Weight: 32 lbs. (14.5 kg)
    • Available Accessories: K10 tote, K10 yoke, M10 Kit-C (sold separately)
Tour Case For (2) QSC K10 SpeakersGator Cases G-TOUR SPKR-2K10 Tour Case For (2) QSC K10 Speakers

Tour style case to hold (2) QSC K10 speakers. Accessory compartment for cables and connectors.Features: G-Tour style case designed to fit (2) QSC K10 loudspeakers Rugged plywood construction with PVC exterior and aluminum valance PE ...

In Stock

Free Shipping Available

Our Price:$419.99List Price: $669.99You save 37%!

Rolling Speaker Bag with Solid BottomGator Cases GPA-777 Rolling Speaker Bag with Solid Bottom

Features: 1680-Denier nylon exterior with roto molded polyethylene footRetractable handleFour 100 pound test in-line wheelsFits EON 15, Mackie SRM 450, EV SX100 & many other plastic speaker enclosures20mm Tricot padded interiorNew ...

In Stock

Free Shipping Available

Our Price:$219.99List Price: $349.99You save 37%!

for K10 2-Way Active LoudspeakerQSC K10 Yoke for K10 2-Way Active Loudspeaker

Powder-coated steel yoke bracket used to mount a K10 loudspeaker horizontally or vertically.  All the hardware and spacers to securely attach the mount to the loudspeaker are included. NOTE: Please see the "Documentation" tab for a ...

In Stock

Our Price:$119.99List Price: $149.99You save 20%!

for K10 2-Way Active LoudspeakerQSC K10 Tote for K10 2-Way Active Loudspeaker

Soft, padded tote made with weather resistant, heavy-duty Nylon/Cordura® material for QSC's K10.  Side-flap access to K10 aluminum top handle for vertical carry.

In Stock

Our Price:$79.99List Price: $99.99You save 20%!

52.25" to 83.375" Aluminum Speaker StandVu SSA100-10B 52.25" to 83.375" Aluminum Speaker Stand

The SSA100-10B from Vu is a large speaker stand constructed of 1.5" to 1.62" aluminum tubing. It is height adjustable from 52.25" to 83.375" and features a metal clutch, nylon block, tripod base, and rubber feet. It's designed for use with ...

In Stock

Free Shipping Available

Our Price:$49.99List Price: $89.99You save 44%!

Nylon/Mesh Cover for K10 2-Way Active LoudspeakerQSC K10 Outdoor Cover Nylon/Mesh Cover for K10 2-Way Active Loudspeaker

Nylon fabric and mesh cover for temporary outdoor use of QSC's K10 in adverse weather.  Removable amplifier panel allows access to connectors and controls.  Vented panel maintains airflow for proper heat management.  ...

In Stock

Free Shipping Available

Our Price:$49.99List Price: $59.99You save 17%!

Eye Bolt Kit for K/KLA12/S8T/S10T/S12 LoudspeakersQSC M10 Kit-C Eye Bolt Kit for K/KLA12/S8T/S10T/S12 Loudspeakers

The QSC M10 Kit-C is an M10 forged-shoulder steel eyebolt kit designed for suspending K Series, KLA12 and AcousticDesign S8T, S10T and S12 loudspeakers.NOTE: Speaker shown in photos above is NOTincluded with purchase QSC M10 Kit-C ...

In Stock

Our Price:$39.99List Price: $49.99You save 20%!

16" Extension Pole for K8 and K10 LoudspeakersQSC K Series Pole Extension 16" Extension Pole for K8 and K10 Loudspeakers

This 16" extension pole from QSC screws directly into QSC's KSub and KW181 pole mounts, and is intended for use with the QSC K8 and K10 loudspeakers.

In Stock

Our Price:$19.99List Price: $21.99You save 9%!

Click to download

QSC K10
10" 2-Way 1000 Watt Powered PA Speaker

OUR PART #  K10-QSC

Product Videos:

Product Information:

The QSC K10 is one of the best 10” powered PA speakers on the market. The K10 2-way loudspeaker features XLR and 1/4” TRS mic/line level inputs. QSC K series speakers offer a fly-mount optional feature and rugged ABS enclosures.

QSC's K10 is a lightweight powered loudspeaker that features a 1000 Class D power module and is fitted with an identical woofer and a 1.75" HF transducer.  The K10 also features auto-standby mode, XLR & 1/4" TRS mic/line level ins, RCA phono ins, direct outs on each channel, a balanced out for daisy-chaining up to three sources and extensive DSP processing.  EQ settings for both the high-freq. and low-freq. transducers are adjustable on each unit.  LEDs can be set to show when the unit is on or when its clip limiter has been engaged.  The extended bass LF setting allows for integration of an external subwoofer into the sound system.

Features fly-mount options as well as the Tilt-Direct™ pole cup mounting system for a 7.5° downward tilt for better sound coverage.  Multiple units can be daisy-chained for total gain control from a single remote pot.  Also features a steel grille and is housed in an ABS enclosure.

QSC K10 Features:

  • 10” Woofer; 1.75” diaphragm compression driver
  • 90° Nominal coverage angle
  • Maximum SPL 129 dB peak
  • 1000-watt continuous Class D power modules in all models
  • Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs,(three audio input sources); two direct channel outputs and single summed balanced output
  • Extensive DSP enhances system performance:
    • DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
    • Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
    • DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
    • GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
  • Attractive and professional appearance
  • Rugged ABS enclosures
  • Functions as a monitor wedge
  • 16-gauge powder coated steel grille
  • Comfortable ergonomic handles
  • 35 mm pole sockets with Tilt-Direct™
  • M10 rigging points
  • Eyebolt and yoke mount accessories available(sold separately)

QSC K10 Specifications:

  • Configuration: Multipurpose 2-way
  • Transducers: 
    • Low-frequency: 10" cone transducer
    • High-frequency: 1.75" diaphragm compression driver
  • Frequency Response (-6 dB): 60 Hz – 18 kHz
  • Frequency Range (-10 dB): 56 Hz – 20 kHz
  • Nominal Coverage (6 dB): 90° conical
  • Maximum SPL: 129 dB peak
  • Amplifier Specifications:
    • RMS Power Output: 1,000 Watts continuous Class D (500 W LF, 500 W HF)
    • Peak Power Output: 2,000 Watts
    • Input Impedance:
      • XLR / 1/4": 40 kOhms balanced / 20 kOhms unbalanced
      • XLR / 1/4" MIC Mode: 2,260 Ohms balanced
      • RCA: 10 kOhms
    • Controls:
      • Power
      • Gain A
      • Gain B
      • Mic/Line
      • LF Mode (Ext Sub/Norm/DEEP)
      • HF Mode (Flat/Vocal Boost)
      • Front LED (On/Off/Limit)
    • Indicators:
      • Power
      • Signal A
      • Signal B
      • Standby
      • Limit
      • Mic
    • Connectors:
      • Two (2) Balanced Female XLR / 1/4" Line/Mic level inputs
      • Two (2) Balanced Male XLR Full-Range Line Level ouputs
      • Balanced Male XLR "Mix" Output
      • Stereo RCA Line Level Input
      • Remote Gain Control
      • Locking IEC Power Connector
    • Amplifier Protection: Thermal limiting, output overcurrent, over temperature muting, Guard Rail
    • Transducer Protection: Thermal limiting, excursion limiting
    • AC Power Consumption:
      • 100 VAC, 2.3 A
      • 120 VAC, 2.01 A
      • 230 VAC, 1.13 A
  • Enclosure Specifications:
    • Material: Impact Resistant ABS
    • Finish: Black Paint
    • Grille: Rugged powder-coated steel
    • Dimensions (HxWxD): 20.4" x 12" x 11.8" (519mm x 320mm x 300mm)
    • Weight: 32 lbs. (14.5 kg)
    • Available Accessories: K10 tote, K10 yoke, M10 Kit-C (sold separately)
Tour Case For (2) QSC K10 SpeakersGator Cases G-TOUR SPKR-2K10 Tour Case For (2) QSC K10 Speakers

Tour style case to hold (2) QSC K10 speakers. Accessory compartment for cables and connectors.Features: G-Tour style case designed to fit (2) QSC K10 loudspeakers Rugged plywood construction with PVC exterior and aluminum valance PE ...

In Stock

Free Shipping Available

Our Price:$419.99List Price: $669.99You save 37%!

Rolling Speaker Bag with Solid BottomGator Cases GPA-777 Rolling Speaker Bag with Solid Bottom

Features: 1680-Denier nylon exterior with roto molded polyethylene footRetractable handleFour 100 pound test in-line wheelsFits EON 15, Mackie SRM 450, EV SX100 & many other plastic speaker enclosures20mm Tricot padded interiorNew ...

In Stock

Free Shipping Available

Our Price:$219.99List Price: $349.99You save 37%!

for K10 2-Way Active LoudspeakerQSC K10 Yoke for K10 2-Way Active Loudspeaker

Powder-coated steel yoke bracket used to mount a K10 loudspeaker horizontally or vertically.  All the hardware and spacers to securely attach the mount to the loudspeaker are included. NOTE: Please see the "Documentation" tab for a ...

In Stock

Our Price:$119.99List Price: $149.99You save 20%!

for K10 2-Way Active LoudspeakerQSC K10 Tote for K10 2-Way Active Loudspeaker

Soft, padded tote made with weather resistant, heavy-duty Nylon/Cordura® material for QSC's K10.  Side-flap access to K10 aluminum top handle for vertical carry.

In Stock

Our Price:$79.99List Price: $99.99You save 20%!

52.25" to 83.375" Aluminum Speaker StandVu SSA100-10B 52.25" to 83.375" Aluminum Speaker Stand

The SSA100-10B from Vu is a large speaker stand constructed of 1.5" to 1.62" aluminum tubing. It is height adjustable from 52.25" to 83.375" and features a metal clutch, nylon block, tripod base, and rubber feet. It's designed for use with ...

In Stock

Free Shipping Available

Our Price:$49.99List Price: $89.99You save 44%!

Nylon/Mesh Cover for K10 2-Way Active LoudspeakerQSC K10 Outdoor Cover Nylon/Mesh Cover for K10 2-Way Active Loudspeaker

Nylon fabric and mesh cover for temporary outdoor use of QSC's K10 in adverse weather.  Removable amplifier panel allows access to connectors and controls.  Vented panel maintains airflow for proper heat management.  ...

In Stock

Free Shipping Available

Our Price:$49.99List Price: $59.99You save 17%!

Eye Bolt Kit for K/KLA12/S8T/S10T/S12 LoudspeakersQSC M10 Kit-C Eye Bolt Kit for K/KLA12/S8T/S10T/S12 Loudspeakers

The QSC M10 Kit-C is an M10 forged-shoulder steel eyebolt kit designed for suspending K Series, KLA12 and AcousticDesign S8T, S10T and S12 loudspeakers.NOTE: Speaker shown in photos above is NOTincluded with purchase QSC M10 Kit-C ...

In Stock

Our Price:$39.99List Price: $49.99You save 20%!

16" Extension Pole for K8 and K10 LoudspeakersQSC K Series Pole Extension 16" Extension Pole for K8 and K10 Loudspeakers

This 16" extension pole from QSC screws directly into QSC's KSub and KW181 pole mounts, and is intended for use with the QSC K8 and K10 loudspeakers.

In Stock

Our Price:$19.99List Price: $21.99You save 9%!

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.