Product Overview
The MV-410HS is a 4-channel multi viewer that supports mixed input of HD-SDI, SD-SDI and analog composite signals. High-resolution video output using a DVI terminal is included as standard. Support is also provided for user-created patterns and video over IP.
Features
- Support for mixed input of HD-SDI, SD-SDI, and analog composite signals (asynchronous input is possible)
- Support for mixed input of different frame rate signals
- High-resolution output: DVI and analog RGB terminals are provided as standard for split-screen video output for enabling easy usage on large screens and computer monitors
- Includes layout editor for enabling the user to make any changes to split-screen patterns from a computer
- Network video transfer function: LAN interface provided as standard for enabling transfer of output video over the network
- Audio level display: Includes level display function for embedded audio signals on HD/SD-SDI (8ch display)
- Includes tally display, title display, and time display functions
- Video loss detection function
- Enables installation of redundant power supply is available (option)
Specifications
- Standard
- HD: 1080/60i, 1080/59.94i, 1080/50i, 720/60p, 720/59.94p, 720/50p
- SD: 252/60 (NTSC), 625/50 (PAL)
- Video Input: 4 inputs from any of the signals below (mixed input and asynchronous input are possible)
- HD-SDI: 1.485Gbps or 1.485/1.001Gbps, 75 ohm, BNC
- SD-SDI: 270 Mbps, 75 ohms, BNC
- Analog Composite: 1.0 Vp-p, 75 ohms, BNC
- LTC Input: 1 input
- SMPTE time code appr. 1.0Vp-p within +/-6dB
- Video Output: DVI output (Outputs Digital and Analog outputs at the same time)
- DVI-I connector, 1 output
- Resolution: 1920 x 1200, 1600 x 1200, 1280 x 1024, 1360 x 768, 1440 x 900, 1680 x 1050, 1920 x 1080, 1280 x 720
- *No input/output frame rate converter. Frame rate difference between input and output results the repeat frame or drop frame.
- Active Loop Through Output (for a monitor):
- HD-SDI: 1.485Gbps or 1.485/1.001Gbps
- SD-SDI: 270Mbps 75O, BNC
- *Available only when input is either HD-SDI or SD-SDI.
- *No jitter correction. The jitter in the input will be carried to the active loop through output. The total jitter may exceed the jitter limit of signal standard.
- Quantization: 8-bit
- I/O Delay: 1-2 frames
- Split-screen Patterns: Full screen, user-created layouts
- Character Display:
- Display Characters: Maximum of 16 characters x 1 line per input channel
- Character Types: Alphanumeric, symbols
- Tally Display: Displayed in each input screen frame (red or green)
- Audio Level Display: Displayed in each input screen frame, 8 channels of embedded audio signals
- Time Display: Enables display of the curret time (Internal clock or LTC selectable)
- *Accuracy within +/-10 seconds per month (at 25ºC)
- Interfaces:
- RS-232C/RS-422: D-sub 9-pin (male), 1 line
- Transmission Rate: 9600/19200/38400 bps, data length: 8 bits, stop bit: 1 bit, parity: ONE/ODD/EVEN
- TALLY IN: D-sub 25-pin (female) *Shared with REMOTE IN
- 4 inputs x 2 colors (red or green color frame display)
- TTL negative logic level signal or make-contact input
- REMOTE IN: D-sub 25-pin (female) *Shared with TALLY IN
- Switching between full screen and split-screen display
- TTL negative logic level signal or make-contact input
- LAN: 10Base-T/100Base-TX, RJ-45 (CAT5 support), 1 line
- Layout Editor: Allows the edit to split-screen layouts
- Temperature/Humidity: 0ºC - 40ºC / 30% - 90% (no condensation)
- Power/Consumption: 100VAC - 240VAC +/-10%, 50Hz/60Hz / 60VA (57W) (at 100V)
- Dimensions (W x H x D): 430 x 44 x 400 mm EIA 1RU / 5.5kg (when the redundant power option is installed)
- Accessories: Operation manual, AC cord, Rack mount brackets, CD-R (Layout editor, Live viewer)
- Option: Redundant power supply
