Rane HC6S
6-Channel Stereo Headphone Amplifier


Our Price: $419.00
List Price: $529.00
You save 21%! (Low Price Guarantee)
In Stock

The Rane HC6S is one of the most indispensable products in today’s audio industry. Featuring six stereo headphone amplifiers, the HC6S performs a number of necessary tasks, not all of which are headphone related.

The HC6S provides Master stereo Inputs which can be used to drive any or all of the 6 stereo headphone amplifiers. A Mono switch on the front panel drives both channels of all 6 amplifiers from a common mono source. Six individual unbalanced stereo Inputs are available to drive any individual amplifier from a separate stereo source. These Inputs can be converted to mono balanced Inputs through internal jumpers if required. Outputs for all six channels are provided on the front panel and on the rear panel so that headphones may be connected on either side. Two pairs of headphones may be driven from each channel, one pair connected to the front and one to the rear.

The HC6S is capable of delivering up to 500 milliwatts into headphones with rated impedances between 32-600 Ohms. The precise amount of power depends on the exact impedance of the headphone in use and the number of headphones connected to the unit. Under most conditions, the HC6S produces sound pressure levels in excess of 120 dB, more than adequate for most listeners.

Rane HC6S Features:

  • 6 independent stereo headphone amplifiers
  • Master balanced or unbalanced stereo inputs with Master Level
  • Six unbalanced stereo Inputs can drive each amplifier
  • Front and rear Output jacks
  • Six Output Level controls
  • Stereo / Mono switch

Rane HC6S Specifications:

  • Headphone Impedance Range:  32 - 600 Ohms
  • Inputs:
    • Type:  Active Balanced/Unbalanced
    • Connectors:  1/4" TRS Balanced
    • Impedance:  20 kOhms
    • Maximum Level:  +20 dBu
  • Outputs:
    • Type:  (6) Stereo Amplifiers
    • Connectors:  1/4" TRS, Tip = Left, Ring = Right
    • Impedance:  0.25 Ohms
  • Overall Gain Range:  Off to +20 dB
  • LED Threshold (Signal Present):  -20 dBu
  • Ultrasonic Filter:  20 kHz, 6 dB/octave, linear phase
  • Frequency Response:  20 Hz - 20 kHz (+0/-3 dB)
  • THD+Noise @ 1 kHz:  0.002%
  • THD+Noise 20 Hz - 20 kHz:  0.02%
  • IM Distortion (SMPTE):  0.03% (60 Hz/7 kHz, 4:1, 150mW/200 Ohms)
  • Signal-to-Noise Ratio:  -96 dB (A-weighted)
  • Mean Time Between Failure:  20,5000 hours
  • Unit Conformity:  CE, FCC, cULus
  • Unit Line Voltage:  100 - 240 VAC, 50/60 Hz
  • Construction:  All Steel
  • Dimensions (HxWxD):  1.75" x 19" x 5.3" (4.3cm x 48.3cm x 13.5cm)
  • Weight:  5 lbs (1.9 kg)

Click to download

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.