AKG GN50 E incl. DPA 22.4" Gooseneck Adapter, with Integrated XLR Connector

An essential feature of the installation hardware described below is the attenuation of structure-borne noise that prevents the transmission of unwanted noise (footfall etc.). The amount of attenuation is determined by the material mix of the rubber shock mount. Modular Series installation modules usea mixture that is extremely efficient at frequencies below 200 Hz (e.g., knocking noise). Unlike standard rubber mixturees that respond to vibrations very slowly, the special AKG rubber mixture absorbs vibrations practically immediately. This prevents successive shocks from adding up. This rubber mixture is used in the H 600 and H 500.

All E-Series modules come with an integrated connector for quick setup and takedown. The goosenecks are available in various lengths. GN 15 E: 9.2" (23.5 cm); GN 30 E: 15" (38 cm); GN 50 E: 22.3" (57.2 cm). Of course the series also has an integrated 200 Hz bass rolloff filter and LED ON/OFF jumper.

AKG GN50E Features:

• Rugged construction
• Highly reliable contacts for capsule modules
• Integrated LED ring status indicator
• Integrated, switchable bass cut
• Integrated XLR connector

AKG GN50E Specifications:

• Bass Filter: 250 Hz, -10dB at 50Hz
• Impedance: < =600 ohms
• Recommended Load Impedance: >=2,000 ohms
• Supply Voltage: 9 to 52V phantom power to DIN/IEC
• Current Consumption: < 3mA
• Connector: 3-pin male XLR
• Finish: Matte Dark Grey
• Dimensions: max dia.: 0.8", length: 22.4"
• Weight: 5.6 oz (net); 18.8 oz (shipping)