(0)

Questions? Call Us:
866-334-8859

Radial Engineering Hot British
Tube Distortion Pedal

OUR PART #  HOTBRITISH

Our Price: $199.99
List Price: $275.00
You save 27%! (Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

Recommended Accessories

The Tonebone Hot British is tube distortion at its best! Fashioned from a modified Marshall double-stack plexy, the Hot British delivers five decades of brute power for everything from scooped-out chunky rhythm to screaming sizzling hot lead tones.

Based on high-gain amplifier designs, the Hot British employs a triple hybrid gain stage that combines the control and dynamics of solid-state with the warmth and harmonic generation only possible from a real 12AX7 tube. This unique design produces ultra-rich harmonic textures and full-on saturated tube settings without the mud or noise that is typical with other pedals. Listen and you will hear how each note retains its distinctiveness and clarity, right down to the lowest notes.

Switch on the Contour, dial in the interactive EQ and wham! Enter a world where huge, musically rich tones that you never thought possible magically come alive. No other pedal delivers more - no other pedal even comes close!

Radial Engineering Hot British Features:

  • A high-gain double-stack 'plexy-in-a-box'!
  • Real 12AX7 tube for natural overdrive
  • Powerful EQ for extreme tonal range
  • Retains note clarity even at high gain
  • Compact & low profile to fit your pedalboard

Radial Engineering Hot British Specifications:

  • Circuit type: Hybrid tube / proprietary circuit
  • Tube type: 12AX7 vacuum tube
  • Input impedance: 1meg Ohm at input jack
  • Output impendence: 10K Ohm
  • MID BOOST 3-way switch: Used to fatten up the sound for more cut andsustain during solos. Also, will fatten up the sound of single coilpickups
        * High: +12dB @ 620Hz
        *Medium: +6dB @ 390Hz
        * Bypass: No boost
  • Drive control: Used in conjunction with the drive gain switch, drive isused to adjust the overall amount of gain to the overdrive circuit.
  • VOICING 3-way switch: Allows the user to jump to chunky scooped rhythms inthe NOTCH position or huge solos in the FAT position.
        *FAT: Mid-boost - passive filter
        * bypass:Flat
        * NOTCH: Mid-cut - passive filter
  • Contour control: Used in conjunction with the VOICING selector switch,'contour' dials-in the mid-center frequency with cut or boost with the switchin the NOTCH or FAT position.
  • TOP END 3-way switch: Switch sets the overall tonal character of theClassic to best match the amp and settings. Brighter amps are normallycompensated with darker settings.
        * Bright: Boosts +6dB@ 10kHz
        * Flat: No boost
        * Dark:Cuts -6dB @ 1.8kHz
  • HIGH & LOW EQ controls: Unity gain to +15dB
        *Low: +/- 14.5 db @ 100Hz
        * High: +/- 10 db @ 4.3kHz
  • LEVEL control: Used to balance the output level between the input drivewithout altering any of the tonal characteristics. Works like the mastervolume on an amplifier.
  • Footswitch: True bypass with green on/off status LED; Heavy-dutyhigh-cycle switch
  • LED indicator: Large 3mm OD ultra-bright status LED
  • Switching: Opto-coupler assisted, 5msec Rise time
  • Construction: 14 gauge steel, baked enamel finish
  • Dimensions (W x D x H): 7" x 4.25" x 2" (174 x 108 x 51 mm)
  • Weight: 2.15 lbs. (1 kg)
15V 400mA Power Supply for Tonebone/X-Amp/J33Radial Engineering R15DC-US 15V 400mA Power Supply for Tonebone/X-Amp/J33

DC Power supply 15V, 400mA for Radial Tonebones, J33 and X-Amp.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$19.99List Price: $20.00

Radial Engineering Hot British
Tube Distortion Pedal

OUR PART #  HOTBRITISH

Product Information:

The Tonebone Hot British is tube distortion at its best! Fashioned from a modified Marshall double-stack plexy, the Hot British delivers five decades of brute power for everything from scooped-out chunky rhythm to screaming sizzling hot lead tones.

Based on high-gain amplifier designs, the Hot British employs a triple hybrid gain stage that combines the control and dynamics of solid-state with the warmth and harmonic generation only possible from a real 12AX7 tube. This unique design produces ultra-rich harmonic textures and full-on saturated tube settings without the mud or noise that is typical with other pedals. Listen and you will hear how each note retains its distinctiveness and clarity, right down to the lowest notes.

Switch on the Contour, dial in the interactive EQ and wham! Enter a world where huge, musically rich tones that you never thought possible magically come alive. No other pedal delivers more - no other pedal even comes close!

Radial Engineering Hot British Features:

  • A high-gain double-stack 'plexy-in-a-box'!
  • Real 12AX7 tube for natural overdrive
  • Powerful EQ for extreme tonal range
  • Retains note clarity even at high gain
  • Compact & low profile to fit your pedalboard

Radial Engineering Hot British Specifications:

  • Circuit type: Hybrid tube / proprietary circuit
  • Tube type: 12AX7 vacuum tube
  • Input impedance: 1meg Ohm at input jack
  • Output impendence: 10K Ohm
  • MID BOOST 3-way switch: Used to fatten up the sound for more cut andsustain during solos. Also, will fatten up the sound of single coilpickups
        * High: +12dB @ 620Hz
        *Medium: +6dB @ 390Hz
        * Bypass: No boost
  • Drive control: Used in conjunction with the drive gain switch, drive isused to adjust the overall amount of gain to the overdrive circuit.
  • VOICING 3-way switch: Allows the user to jump to chunky scooped rhythms inthe NOTCH position or huge solos in the FAT position.
        *FAT: Mid-boost - passive filter
        * bypass:Flat
        * NOTCH: Mid-cut - passive filter
  • Contour control: Used in conjunction with the VOICING selector switch,'contour' dials-in the mid-center frequency with cut or boost with the switchin the NOTCH or FAT position.
  • TOP END 3-way switch: Switch sets the overall tonal character of theClassic to best match the amp and settings. Brighter amps are normallycompensated with darker settings.
        * Bright: Boosts +6dB@ 10kHz
        * Flat: No boost
        * Dark:Cuts -6dB @ 1.8kHz
  • HIGH & LOW EQ controls: Unity gain to +15dB
        *Low: +/- 14.5 db @ 100Hz
        * High: +/- 10 db @ 4.3kHz
  • LEVEL control: Used to balance the output level between the input drivewithout altering any of the tonal characteristics. Works like the mastervolume on an amplifier.
  • Footswitch: True bypass with green on/off status LED; Heavy-dutyhigh-cycle switch
  • LED indicator: Large 3mm OD ultra-bright status LED
  • Switching: Opto-coupler assisted, 5msec Rise time
  • Construction: 14 gauge steel, baked enamel finish
  • Dimensions (W x D x H): 7" x 4.25" x 2" (174 x 108 x 51 mm)
  • Weight: 2.15 lbs. (1 kg)
15V 400mA Power Supply for Tonebone/X-Amp/J33Radial Engineering R15DC-US 15V 400mA Power Supply for Tonebone/X-Amp/J33

DC Power supply 15V, 400mA for Radial Tonebones, J33 and X-Amp.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$19.99List Price: $20.00

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.