Xantech RP41AV
Remote Audio / Video Preamplifier, 4 Inputs


Call for price! Not available online.

The RP41AV is a fully functional infrared remote controlled audio/video preamp. Volume, Bass, Treble, Balance and Mute functions, plus A/V switching, provide all the functions needed for multi-room systems. It features a low noise, low distortion design with greatly increased headroom capability, for highest audio and video performance. The “flat pack” design addresses the need for reduced space requirements as multi-room, multi-zone systems grow in complexity.


  • 4 separate line level A/V inputs, simply labeled 1,2, 3, and 4, accessed in any order from the RC68+ Hand-held Remote/Programmer’s infrared commands.
  • Separate Volume (Up/Down), Balance (Left/Right), Bass and Treble controls feature continuous adjustment in 2 dB steps, in either direction, all IR controlled.
  • Balance, Bass and Treble controls have a Flat function (on the RC68+) for instant return to flat response from any previous setting.
  • Separate Mute On and Mute Off functions are included so that you can give a positive command without knowing what the status is. This is very helpful in remote areas when all adjustments are made “blind” without any visual aids for status.
  • IR control input port connects to the emitter output of Xantech devices, allowing remote control from keypads, IR receivers, connecting blocks, etc.
  • Tone controls allow Individual "EQ" of each room in multi-zone installations.


  • Gain (@ max VC): Unity
  • Input Overload: 4.5 V RMS (@ max VC)
  • Input Impedance: > 40 k Ohms (ea. input)
  • Output Impedance: < 100 Ohms
  • Volume Attenuation: -80 dB
  • Signal to Noise: 100 dB (re 2V out), IEC 'A' weighted
  • THD: (VC -10 dB) 0.01% at 2.0 V input level
  • Channel Separation: > 75 dB @ 1 kHz
  • Freq. Response: 20Hz-20kHz +/- 1 dB
  • Bass Range: +/- 12 dB (in 2 dB steps)
  • Treble Range: +/- 12 dB (in 2 dB steps)
  • Video IN/OUT Impedance: 75 Ohms.
  • Video Insertion Loss: 50 Hz - 10 mHz < 1dB.
  • Video Out-IN Isolation: 50 Hz - 10 mHz > 55 dB.
  • Power Requirements: 15 VAC @ 300 mA. Power supply included.
  • Power and IR Inputs: 4-terminal screw terminal plug-in connector.
  • Requires RC68+ Programmer.
  • Dimensions (W x D x H): 10" x 3" x 1-3/8" (254 x 77 x 35 mm)
Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.