(0)

Questions? Call Us:
866-334-8859

Turbosound TSB-110
Dual 10" Passive Compact Sub-Bass Enclosure

OUR PART #  TSB-110

Selected Model Price: $249.00
List Price: $286.35

Save up to 13%! (Low Price Guarantee)
Select model: (shipping times are approximate)

The Turbosound TSB-110 is a compact sub-bass enclosure designed to be used in a variety of installed sound system applications ranging from clubs and wine bars to theatres, themed environments and places of worship.

It comprises a dual voice coil 10” LF driver in a birch plywood enclosure consisting of two dissimilar compartments, optimally ported to produce substantial sub-bass energy from a cabinet of extremely modest dimensions.

The TSB-110 provides sub-bass support for several Turbosound enclosures including the IMPACT50 and IMPACT80, as well as loudspeakers from the QLight™ series. It is a essentially a dual channel loudspeaker, having two independent voice coils within the same drive unit, and so a single subbass enclosure can be configured as part of a high quality two channel system consisting of up to four satellite units per channel. The left and right low frequency input signals, having very little directionality, are summed to generate a mono bass signal. A rear panel connector plate provides left and right stereo inputs and outputs via four colour-coded spring-loaded push terminals.

The TSB-110 has been designed to fit into small spaces or architectural features where a conventional bass unit would be impractical. It can therefore be installed discreetly under bars or stages, or even underneath seating, without affecting sonic performance. M10 rigging points are additionally provided to allow the enclosure to permanently installed.

The enclosure is constructed from 15mm (5/8”) birch plywood and is available as standard in black textured paint. TurboBlue™ or white semi-matt textured paint is optionally available. Colour-coded push terminals are provided on a connector panel on the rear of the cabinet.

Turbosound TSB-110 Features:

  • Compact enclosure
  • 350 watt power rating
  • Dual voice coil speaker

Turbosound TSB-110 Specifications:

  • Components: 1 x 254mm (10”) dual voice coil LF driver
  • Frequency Range: 45Hz to 180Hz @±4dB
  • Power Handling: 300 watts r.m.s., 600 watts program
  • Sensitivity: 95dB SPL, 1 watt @ 1 metre
  • Max. SPL: 120dB continuous, 126dB peak
  • Crossover: Built in high-pass crossover network at150Hz
  • Impedance: 2 x 4 ohms nominal
  • Construction: 15mm (5/8”) birch plywood, finished in black textured paint
  • Connectors: 2 x input L&R spring-loaded push terminals; 2x NL4MP; 2x output spring-loaded push terminals
  • Rigging: 4 x M10 rigging points
  • Dimensions: 13" H x 23" W x 13" D (330 x 585 x 330 mm)
  • Weight: 36.3 lbs (16.5 kg)

Turbosound TSB-110
Dual 10" Passive Compact Sub-Bass Enclosure

OUR PART #  TSB-110

Product Information:

The Turbosound TSB-110 is a compact sub-bass enclosure designed to be used in a variety of installed sound system applications ranging from clubs and wine bars to theatres, themed environments and places of worship.

It comprises a dual voice coil 10” LF driver in a birch plywood enclosure consisting of two dissimilar compartments, optimally ported to produce substantial sub-bass energy from a cabinet of extremely modest dimensions.

The TSB-110 provides sub-bass support for several Turbosound enclosures including the IMPACT50 and IMPACT80, as well as loudspeakers from the QLight™ series. It is a essentially a dual channel loudspeaker, having two independent voice coils within the same drive unit, and so a single subbass enclosure can be configured as part of a high quality two channel system consisting of up to four satellite units per channel. The left and right low frequency input signals, having very little directionality, are summed to generate a mono bass signal. A rear panel connector plate provides left and right stereo inputs and outputs via four colour-coded spring-loaded push terminals.

The TSB-110 has been designed to fit into small spaces or architectural features where a conventional bass unit would be impractical. It can therefore be installed discreetly under bars or stages, or even underneath seating, without affecting sonic performance. M10 rigging points are additionally provided to allow the enclosure to permanently installed.

The enclosure is constructed from 15mm (5/8”) birch plywood and is available as standard in black textured paint. TurboBlue™ or white semi-matt textured paint is optionally available. Colour-coded push terminals are provided on a connector panel on the rear of the cabinet.

Turbosound TSB-110 Features:

  • Compact enclosure
  • 350 watt power rating
  • Dual voice coil speaker

Turbosound TSB-110 Specifications:

  • Components: 1 x 254mm (10”) dual voice coil LF driver
  • Frequency Range: 45Hz to 180Hz @±4dB
  • Power Handling: 300 watts r.m.s., 600 watts program
  • Sensitivity: 95dB SPL, 1 watt @ 1 metre
  • Max. SPL: 120dB continuous, 126dB peak
  • Crossover: Built in high-pass crossover network at150Hz
  • Impedance: 2 x 4 ohms nominal
  • Construction: 15mm (5/8”) birch plywood, finished in black textured paint
  • Connectors: 2 x input L&R spring-loaded push terminals; 2x NL4MP; 2x output spring-loaded push terminals
  • Rigging: 4 x M10 rigging points
  • Dimensions: 13" H x 23" W x 13" D (330 x 585 x 330 mm)
  • Weight: 36.3 lbs (16.5 kg)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.