(0)

Questions? Call Us:
800-356-5844

Rode NT2-A
Multi-Pattern Studio Condenser Microphone

OUR PART #  NT2A

Our Price: $399.00
List Price: $699.00
You save 43%! (Low Price Guarantee)
In Stock

Recommended Accessories

RODE's NT2-A is a professional large capsule (1") condenser studio microphone with variable pick-up pattern, variable high pass filter and variable pad. These features provide greater creative control and versatility.

Three 3-position switches located on the mic body provide the freedom to step from Figure 8, Cardioid or Omni polar pick-up patterns; from a flat response to either 80 Hz or 40 Hz high-pass filter and a Pad adjustment of 0 dB, -5 dB or -10 dB attenuation.

The heart of the NT2-A is the Australian designed and manufactured TYPE HF1 dual diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today’s modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50’s and 60’s.

RØDE NT2-A Features:

  • The Australian designed and manufactured HF1 1" edge terminated, gold sputtered, dual 5 um diaphragm capsule.
  • 3-position variable polar pattern:  Omnidirectional, Cardioid & Figure 8; all controlled on the mic.
  • 3-position variable high-pass filter:  Flat, 80 Hz or 40 Hz.
  • 3-position variable pad:  0 dB, -5 dB or -10 dB.
  • Ultra low noise, transformerless SMT circuitry.
  • Wide dynamic range.
  • High strength heat-treated steel mesh head.
  • Durable satin nickel finish.
  • Internal capsule shock mounting.
  • Supplied with shockmount, pop filter, XLR Cable and dust cover
  • Designed and manufactured in Sydney, Australia.

RØDE NT2-A Specifications:

  • Acoustic principle:  Externally polarized 25 mm (1") dual diaphragm.
  • Directional pattern:  Multi-pattern
  • Frequency range:  20 Hz - 20 kHz
  • Output impedance:  200 ohms
  • Signal/Noise ratio DIN/IEC 651:  87 dB (1 kHz rel 1Pa; per IEC651, IEC268-15)
  • Equivalent noise:  7 dBA SPL (per IEC651, IEC268-15)
  • Maximum SPL (@ 1% THD into 1 kOhm):  147 dB, 157 dB (pad at max.)
  • Sensitivity at 1 kHz into 1 kOhm:  -36 dB re 1Volt/Pascal (16 mV @ 94 dBSPL) +/-2 dB
  • Maximum output voltage:  +16 dBu (@ 1% THD into 1 kOhm)
  • Dynamic range of the mic. amplifier DIN/IEC 651:  140dB (per IEC651, IEC268-15)
  • Power (Supply voltage):  48 Volts (P48)
  • Output Connection:  3 pin XLR, balanced output between pin 2 (+) and pin 3 (-). Pin 1 ground
  • Weight:  4.23 oz (860 g)
Microphone Windscreen, 1-7/8" Inside Diameter (Black)
WindTech 20/421-BLACK Microphone Windscreen, 1-7/8" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
In Stock
31.95 42.95 26
In Stock
Windscreen for NT2,NT1,NTK,NTV
Rode WS2-RODE Windscreen for NT2,NT1,NTK,NTV
Suits: NT1-A, NT2-A, NT1000, NT2000, NTK, K2 & Broadcaster
In Stock
19.99
In Stock
Mic Stand Mount
Rode RM2 Mic Stand Mount
The RM2 is a low profile professional stand mount for the RØDE NT2-A, NT1000, NT2000, NTK, K2, Classic II & Broadcaster microphone. It screws onto the bottom of the microphone providing an easy and convenient attachment system for ...
In Stock
14.99
In Stock
Shockmount with Pop Shield
Rode SM6 Shockmount with Pop Shield
The SM6 is a high quality suspension shock mount that supports many large diaphragm RØDE microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.It includes a ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
59.00 79.00 25
Usually ships in 7-14 business days.
Need it sooner? Call us!
Shock Mount for Large Diaphragm Condenser Microphones
Rode SM2 Shock Mount for Large Diaphragm Condenser Microphones
The R­ØDE SM2 is a suspension shock mount that holds a range of large diaphragm condenser microphones. It provides isoaltion from external physical factors that may cause unwanted rumble and vibrations in the microphone.Additionally ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
49.00 69.00 29
Usually ships in 7-14 business days.
Need it sooner? Call us!
Zip Pouch for Rode Microphones
Rode ZP1 Zip Pouch for Rode Microphones
Zip Pouch for Rode Microphones.Suits: S1, NT1-A, NT2-A, NT3, NT1000, NTG-1 & Broadcaster microphones.
Usually ships in 7-14 business days.
Need it sooner? Call us!
9.99
Usually ships in 7-14 business days.
Need it sooner? Call us!

Click to download

Rode NT2-A
Multi-Pattern Studio Condenser Microphone

OUR PART #  NT2A

Product Information:

RODE's NT2-A is a professional large capsule (1") condenser studio microphone with variable pick-up pattern, variable high pass filter and variable pad. These features provide greater creative control and versatility.

Three 3-position switches located on the mic body provide the freedom to step from Figure 8, Cardioid or Omni polar pick-up patterns; from a flat response to either 80 Hz or 40 Hz high-pass filter and a Pad adjustment of 0 dB, -5 dB or -10 dB attenuation.

The heart of the NT2-A is the Australian designed and manufactured TYPE HF1 dual diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today’s modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50’s and 60’s.

RØDE NT2-A Features:

  • The Australian designed and manufactured HF1 1" edge terminated, gold sputtered, dual 5 um diaphragm capsule.
  • 3-position variable polar pattern:  Omnidirectional, Cardioid & Figure 8; all controlled on the mic.
  • 3-position variable high-pass filter:  Flat, 80 Hz or 40 Hz.
  • 3-position variable pad:  0 dB, -5 dB or -10 dB.
  • Ultra low noise, transformerless SMT circuitry.
  • Wide dynamic range.
  • High strength heat-treated steel mesh head.
  • Durable satin nickel finish.
  • Internal capsule shock mounting.
  • Supplied with shockmount, pop filter, XLR Cable and dust cover
  • Designed and manufactured in Sydney, Australia.

RØDE NT2-A Specifications:

  • Acoustic principle:  Externally polarized 25 mm (1") dual diaphragm.
  • Directional pattern:  Multi-pattern
  • Frequency range:  20 Hz - 20 kHz
  • Output impedance:  200 ohms
  • Signal/Noise ratio DIN/IEC 651:  87 dB (1 kHz rel 1Pa; per IEC651, IEC268-15)
  • Equivalent noise:  7 dBA SPL (per IEC651, IEC268-15)
  • Maximum SPL (@ 1% THD into 1 kOhm):  147 dB, 157 dB (pad at max.)
  • Sensitivity at 1 kHz into 1 kOhm:  -36 dB re 1Volt/Pascal (16 mV @ 94 dBSPL) +/-2 dB
  • Maximum output voltage:  +16 dBu (@ 1% THD into 1 kOhm)
  • Dynamic range of the mic. amplifier DIN/IEC 651:  140dB (per IEC651, IEC268-15)
  • Power (Supply voltage):  48 Volts (P48)
  • Output Connection:  3 pin XLR, balanced output between pin 2 (+) and pin 3 (-). Pin 1 ground
  • Weight:  4.23 oz (860 g)
Microphone Windscreen, 1-7/8" Inside Diameter (Black)
WindTech 20/421-BLACK Microphone Windscreen, 1-7/8" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
In Stock
31.95 42.95 26
In Stock
Windscreen for NT2,NT1,NTK,NTV
Rode WS2-RODE Windscreen for NT2,NT1,NTK,NTV
Suits: NT1-A, NT2-A, NT1000, NT2000, NTK, K2 & Broadcaster
In Stock
19.99
In Stock
Mic Stand Mount
Rode RM2 Mic Stand Mount
The RM2 is a low profile professional stand mount for the RØDE NT2-A, NT1000, NT2000, NTK, K2, Classic II & Broadcaster microphone. It screws onto the bottom of the microphone providing an easy and convenient attachment system for ...
In Stock
14.99
In Stock
Shockmount with Pop Shield
Rode SM6 Shockmount with Pop Shield
The SM6 is a high quality suspension shock mount that supports many large diaphragm RØDE microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.It includes a ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
59.00 79.00 25
Usually ships in 7-14 business days.
Need it sooner? Call us!
Shock Mount for Large Diaphragm Condenser Microphones
Rode SM2 Shock Mount for Large Diaphragm Condenser Microphones
The R­ØDE SM2 is a suspension shock mount that holds a range of large diaphragm condenser microphones. It provides isoaltion from external physical factors that may cause unwanted rumble and vibrations in the microphone.Additionally ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
49.00 69.00 29
Usually ships in 7-14 business days.
Need it sooner? Call us!
Zip Pouch for Rode Microphones
Rode ZP1 Zip Pouch for Rode Microphones
Zip Pouch for Rode Microphones.Suits: S1, NT1-A, NT2-A, NT3, NT1000, NTG-1 & Broadcaster microphones.
Usually ships in 7-14 business days.
Need it sooner? Call us!
9.99
Usually ships in 7-14 business days.
Need it sooner? Call us!

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.