Earthworks TC20 Omnidirectional Small Diaphragm Condenser Microphone

Designed for recording louder sources such as drums, percussion, amplified instruments and loud sound effects, the TC20 is the least expensive general-purpose omnidirectional microphone offered by Earthworks, with high frequency response to 20 kHz, and with sound and performance similar to the TC30 or TC25 models (sold separately), and covering the same range of applications. For live sound, this superb mic can be used for close-miking instrument amps, drums or brass, plus under the strings of a standup bass or inside a kick drum it'll reproduce amazing sound. A pair of these quality mics connected to a stereo recorder will deliver great results for recording rehearsals and performances. Many musicians use a matched pair for recording their groups in the studio or during a live performance. An excellent mic for general studio use, as well as in a wide variety of applications, and priced to fit the working musician’s budget, the TC20 is an exceptional value.

Applications

Acoustic String Instruments • Bass Amp • Brass/Woodwinds • Guitar Amp • Piano • Recording

Features

• Cost-effective general-purpose omni with high frequency response to 20 kHz
• Ideal for a wide variety of instruments and vocals, including acoustic guitar, string instruments and piano
• For live sound, it can be used for close miking instrument amps, drums or brass
• Omnidirectional polar pattern
• Accurate and uncolored
• Effortlessly handle high sound pressure levels up to 150 dB SPL while simultaneously capturing subtle details
• Fast impulse response and diaphragm settling time
• Exceptional flat frequency response and are time coherent, so they sound natural and uncolored

Specifications

• Frequency Response: 9 Hz to 20 kHz ±1/-3 dB
• Polar Pattern: Omnidirectional
• Sensitivity: 8 mV/Pa (-42 dBV/Pa)
• Power Requirements: 24-48 V Phantom, 10 mA
• Max Acoustic Input: 150 dB SPL
• Output: XLR (pin 2+)
• Output Impedance: 65 Ω balanced (between pins 2 and 3)
• Min Output Load: 600 Ω between pins 2 and 3
• Noise: 26 dB SPL equivalent (A weighted)
• Dimensions (L x Ø): 6.5" x 0.860" (165 x 22mm)
• Weight: 0.35 lb. (160 g)