(0)

Questions? Call Us:
866-334-8859

Shure SLX4
Wireless Microphone Diversity Receiver

OUR PART #  SLX4

Selected Model Price: $380.00
List Price: $475.00

Save up to 20%! (Low Price Guarantee)
Select model: (shipping times are approximate)

Recommended Accessories

Shure's SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. For use with SLX Wireless.

With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.

Model SLX4L is available with logic output for use with software echo cancellation and remote battery life monitoring. Logic-enabled transmitters include MX690 and MX890.

Shure SLX4 Features:

  • Automatic Frequency Selection
  • Automatic Transmitter Setup
  • 960 Selectable frequencies across 24 MHz bandwidth
  • Detachable 1/4 wave antennas
  • Microprocessor-controlled diversity
  • RF presence LED
  • 5-segment audio meter
  • Multi-function, backlit LCD
  • Low battery indicator
  • Frequency and power lockout
  • Rugged metal chassis
  • Volume control on rear of unit
  • 1/2 rack design
  • Furnished rack hardware
  • Non-slip bumpers for use out of rack
  • XLR and 1/4" outputs

Shure SLX4 Specifications:

  • Dimensions (HxWxD):  42mm x 197mm x 134mm
  • Weight:  1.13 lbs
  • Housing:  Galvanized steel
  • Sensitivity:  -105 dBm for 12 dB SINAD, typical
  • Power Requirements:  12–18 V DC @ 150 mA, supplied by external power supply (tip positive)
  • Configuration:  Impedance balanced
  • Maximum Audio Output Level (Ref. +/- 38 kHz deviationwith 1 kHz tone):
    • XLR Connector:  –13 dBV (into 600 Ohm load)
    • 1/4" Connector:  –2 dBV (into 3 kOhm load)
  • Impedance:
    • XLR Connector:  200 Ohms
    • 1/4" Connector:  1 kOhms
  • Pin Assignments:
    • XLR Connector:  1 = Ground, 2 = Audio, 3 = No audio
    • 1/4" Connector:  Tip = Audio, Ring = No audio, Sleeve = Ground
    • Image Rejection:  > 70 dB, typical
    • Volume Adjustment Range:  0 dB to -25 dB
Universal hard caseShure WA610 Universal hard case

Universal Hard Carrying Case- For Shure 1/2 rack wireless systems.

In Stock

Free Shipping Available

Our Price:$110.44List Price: $113.00

1/2 Wave Omnidirectional AntennaShure UA8 1/2 Wave Omnidirectional Antenna

The Shure UA8 is a 1/2 wave omnidirectional receiver antenna for UHF-R®, ULX®, SLX®, ULX-D®, and BLX4R receivers (frequency range dependent) and PSM transmitters.  Features 0-, 45-, and 90-degree positioning for increased ...

In Stock

Our Price:$30.92List Price: $32.00

Click to download

Shure SLX4
Wireless Microphone Diversity Receiver

OUR PART #  SLX4

Product Information:

Shure's SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. For use with SLX Wireless.

With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.

Model SLX4L is available with logic output for use with software echo cancellation and remote battery life monitoring. Logic-enabled transmitters include MX690 and MX890.

Shure SLX4 Features:

  • Automatic Frequency Selection
  • Automatic Transmitter Setup
  • 960 Selectable frequencies across 24 MHz bandwidth
  • Detachable 1/4 wave antennas
  • Microprocessor-controlled diversity
  • RF presence LED
  • 5-segment audio meter
  • Multi-function, backlit LCD
  • Low battery indicator
  • Frequency and power lockout
  • Rugged metal chassis
  • Volume control on rear of unit
  • 1/2 rack design
  • Furnished rack hardware
  • Non-slip bumpers for use out of rack
  • XLR and 1/4" outputs

Shure SLX4 Specifications:

  • Dimensions (HxWxD):  42mm x 197mm x 134mm
  • Weight:  1.13 lbs
  • Housing:  Galvanized steel
  • Sensitivity:  -105 dBm for 12 dB SINAD, typical
  • Power Requirements:  12–18 V DC @ 150 mA, supplied by external power supply (tip positive)
  • Configuration:  Impedance balanced
  • Maximum Audio Output Level (Ref. +/- 38 kHz deviationwith 1 kHz tone):
    • XLR Connector:  –13 dBV (into 600 Ohm load)
    • 1/4" Connector:  –2 dBV (into 3 kOhm load)
  • Impedance:
    • XLR Connector:  200 Ohms
    • 1/4" Connector:  1 kOhms
  • Pin Assignments:
    • XLR Connector:  1 = Ground, 2 = Audio, 3 = No audio
    • 1/4" Connector:  Tip = Audio, Ring = No audio, Sleeve = Ground
    • Image Rejection:  > 70 dB, typical
    • Volume Adjustment Range:  0 dB to -25 dB
Universal hard caseShure WA610 Universal hard case

Universal Hard Carrying Case- For Shure 1/2 rack wireless systems.

In Stock

Free Shipping Available

Our Price:$110.44List Price: $113.00

1/2 Wave Omnidirectional AntennaShure UA8 1/2 Wave Omnidirectional Antenna

The Shure UA8 is a 1/2 wave omnidirectional receiver antenna for UHF-R®, ULX®, SLX®, ULX-D®, and BLX4R receivers (frequency range dependent) and PSM transmitters.  Features 0-, 45-, and 90-degree positioning for increased ...

In Stock

Our Price:$30.92List Price: $32.00

Click to download

Deal of the Day
Audix
i5
i5
$200.28
$109.99

Sold Out!
Check back tomorrow for another incredible deal!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.