(0)

Questions? Call Us:
800-356-5844

JBL LSR6328P/5.1
5 x LSR6328P Loudspeakers, 1 x LSR6312SP Subwoofer

OUR PART #:  LSR6328P/5.1

The LSR6328P is the choice for stereo and multi-channel music and post audio applications where accuracy and high SPL are required.
Learn More

Call for price! Not available online.
List Price: $10,752.00

Similar Products

The LSR6328P is the choice for stereo and multi-channel music and post audio applications where accuracy and high SPL are required. With ruler-flat +1 dB/-1.5 dB response from 50 Hz to 20 kHz, low frequency extension to 36 Hz, boundary compensation and JBL's new RMC™ system, the LSR6328P gives you exceptional low frequency performance in any room. The system is bi-amped with a 250 Watt LF amplifier and a 120 Watt HF amplifier. Wall mounting provisions make the LSR6328P perfect for installation in multi-channel editorial rooms.

The LSR6312SP powered subwoofer is based on a 12" woofer with JBL's patented Neodymium Differential Drive® and 250 Watts of power. An integral bass-management system provides all the features you need for today's multi-format surround production including: LCR and Direct LFE inputs, summed output for chaining multiple subwoofers, -4 dB alignment setting, and JBL's new RMC™ Room Mode Correction system. RMC Calibration Kit included.

Kit includes: LSR6328P (x5) and LSR6312SP (x1)



LSR6328P Features:
  • Advanced Linear Spatial Reference design ensures flatter-off-axis response for greater clarity at the mix position
  • RMC™ Room Mode Correction provides electronic control of room modes. User measurement and calibration kit available.
  • Differential Drive® technology with dynamic braking for extended low frequency response and minimal power compression.
  • Integrated bi-amplification with factory calibrated sensitivities.
  • Titanium composite high frequency transducer with Elliptical Oblate Spheroidal waveguide for precise pattern control.
  • Magnetically shielded high frequency transducer minimizes interference when used in close proximity to video monitors.
  • High-density baffle for low enclosure resonance.
  • Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
  • Reinforced enclosure and convenient mounting points for mounted installation.
  • Integral handles facilitate ease of positioning.
    LSR6328P Specifications
    • Frequency Response (+1, -1.5 dB): 50 Hz - 20 kHz
    • Enclosure Resonance Frequency: 38 Hz
    • Low Frequency Extension: User controls set to default
      • -3 dB: 46 Hz
      • -10 dB: 36 Hz
    • Low-High Frequency Crossover: 1.7 kHz 6th-order acoustic Linkwitz-Riley
    • Maximum SPL (80 Hz - 20 kHz): >108 dB SPL / 1m
    • Maximum Peak SPL (80 Hz - 20 kHz): >111 dB SPL / 1m
    • Signal Input: Neutrik “Combi” XLR-¼-in tip-ring-sleeve balanced or unbalanced positive voltage applied to XLR pin 2 (¼" tip) produces outward woofer motion
    • Calibrated Input Sensitivity, XLR & ¼":
      • +4 dBu / +8 dBu: 96 dB SPL / 1 m
      • -10 dBV: 96 dB SPL / 1 m
    • Low Frequency Model: 218F
      • Diameter: 203 mm (8 in)
      • Voice Coil: 38 mm (1.5 in) Differential Drive® with dynamic braking coil
      • Magnet Type: Ferrite, with integral heat sink
      • Cone Type: Carbon fiber composite
      • Impedance: 2 ohms
    • High Frequency Model: 053TiS
      • Diameter: 25 mm (1 in) diaphragm
      • Voice Coil: 25 mm (1 in)
      • Magnet Type: Ferrite, shielded
      • Diaphragm Type: Damped titanium composite
      • Other Features: Elliptical oblate spheroidal waveguide
      • Impedance: 4 ohms
    • Finish: Smooth dark graphite
    • Handles: 2 each, flush mounted on sides
    • Mounting: 4 threaded mounting points conforming to industry standard square pattern, 127 x 70 mm (5 x 2.75 in) center to center. M6 metric threads.
    • Enclosure Volume (net): 28 liter (1 cu ft)
    • Low Frequency Vent: Rear ported linear dynamics aperture (integrated with amplifier heat sink)
    • Baffle Construction: Injection-molded structural ABS
    • Enclosure Construction: 19 mm (¼ in) MDF
    • Net Weight: 17.7 kg (39 lb)
    • Dimensions (WxHxD): 406 x 330 x 325 mm (16 x 13 x 12.8 in)
      LSR6312SP Features:
      • Multi-format powered subwoofer for Dolby Prologic, AC-3, DTS and other surround formats.
      • RMC™ Room Mode Correction provides electronic control of response peaks due to room modes. RMC Calibration Kit included.
      • 250 Watt continuous output power amplifier.
      • Sophisticated LCR bass management system.
      • Direct LFE input with selectable 10 dB input sensitivity.
      • Summed output allows chaining of multiple LSR6312SP for multiple subwoofer systems.
      • Neodymium Differential Drive NDD™ technology with dynamic braking for extended low frequency response and low power compression.
      • High-density baffle for low resonance and stable inertial ground.
      • Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
      • Reinforced enclosure and convenient mounting points for mounted installation.
        LSR6312SP Specifications:
        • Frequency Response: (-6 dB)1: 28 - 80 Hz
        • Low Frequency Extension: User controls set to default
          • -3 dB: 34 Hz
          • -10 dB: 26 Hz
        • Enclosure Resonance Frequency: 28 Hz
        • Low-To-High Crossover Frequency: 80 Hz (4th order electroacoustic Linkwitz-Riley)
        • Maximum Continuous SPL: >112 dB SPL / 1 m (35 Hz - 80 Hz)
        • Maximum Peak SPL: >115 dB SPL / 1 m (35 Hz - 80 Hz)
        • Calibrated Input Sensitivity: XLR or ¼", Selectable -10 dBV, +4 dBu, +8 dBu: 96 dB / 1 m
        • Power Nonlinearity (20 Hz – 200 Hz):
          • 30 Watts: <0.4 dB
          • 100 Watts: <1.0 dB
        • Low Frequency Model: 252F
        • Diameter: 300 MM (12 in)
        • Voice Coil: 50 mm (2 in) Differential Drive® with dynamic braking coil
        • Magnet Type: Neodymium, with integral heat sink
        • Cone Type: Carbon fiber composite
        • Impedance: 2 ohms
        • Finish: Smooth dark graphite
        • Enclosure Construction: 19 mm (¾ in) MDF
        • Mounting: 4 threaded mounting points conforming to industry standard square pattern 127 x 70 mm (5 x 2.75 in) center to center. M6 metric threads.
        • Baffle Material: Injection molded structural ABS
        • Enclosure Volume (net): 50 liter (1.8 cu ft)
        • Net Weight: 22.7 kg (50 lb)
        • Dimensions (WxHxD): 63.5 x 39.4 x 29.2 cm (25.0 x 15.5 x 11.5 in)
          Add to Cart

          We're sorry, only of this item available



          Call a Sales Pro at 800-356-5844 for more information

          © 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

          We are not responsible for typographical errors in pricing or product specification
          inaccuracies in our catalog or web site. Prices are subject to change without notice.