Product Overview
Specify R (RIGHT)
If you need a larger monitor with high SPL, for mid-field, soffit or behind the screen applications, the LSR6332 is your choice. This three-way non-powered system can handle 200 Watts continuous pink noise/800 Watts peak and will generate 112 dB SPL at 1 meter. The LSR6332 incorporates a 12" Neodymium Differential Drive® dual coil woofer, 5" Kevlar™ midrange speaker and 1" titanium composite tweeter.
Features:
- Advanced Linear Spatial Reference design ensures flatter response at the mix position.
- Neodymium Differential Drive NDD™ technology with dynamic braking for extended low frequency response and low power compression.
- Neodymium midrange with 2" voice coil and Kevlar™ cone material for extended frequency response and low distortion.
- Titanium composite high frequency transducer with elliptical oblate spheroidal waveguide and damped polepiece.
- High-Density baffle for low enclosure resonance and stable inertial ground.
- Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
- Magnetically shielded for use near video monitors.
- Reinforced enclosure and convenient mounting points allow mounted installation.
- Midrange/high frequency sub-baffle may be rotated by user for horizontal or vertical orientation.
- Available as mirror image left and right models.
Specifications:
- Input Impedance (Nominal): 4 ohm
- Anechoic Sensitivity1: 93 dB/2.83 V/1 m (90 dB/ 1 W/ 1 m)
- Frequency Response (60 Hz – 22 kHz): +1. -1.5 dB
- Low Frequency Extension:
- -3 dB: 54 Hz
- -10 dB: 35 Hz
- Enclosure Resonance Frequency: 33 Hz
- Long Term Maximum Power (IEC265-5): 200 W continuous average; 800 W peak
- Recommended Amplifier Power: 150 W - 1000 W (rating into 4-ohm load)
- High Frequency Control (2.5 to 20 kHz): 0 dB, -1 dB
- Low Frequency Model: 252G
- Diameter: 300 mm (12 in)
- Voice Coil: 50 mm (2 in) Differential Drive® with dynamic braking coil
- Magnet Type: Neodymium
- Cone Type: Carbon Fiber Composite
- Impedance: 4 ohms
- Mid Frequency Model: C500G
- Diameter: 125 mm (5 in)
- Voice Coil: 50 mm (2 in) aluminum edge wound
- Magnet Type: Neodymium
- Cone Type: Kevlar™ composite
- Impedance: 4 ohms
- High Frequency Model: 053TiS
- Diameter: 25 mm (1 in) diaphragm
- Voice Coil: 25 mm (1 in)
- Magnet Type: Ceramic 5
- Diaphragm Type: Damped titanium composite
- Other Features: Elliptical oblate spheroidal waveguide
- Impedance: 4 ohms
- Finish: Smooth dark graphite
- Enclosure Volume (Net): 50 liter (1.8 cu ft)
- Input Connectors: 5-way binding posts
- Input Features: Bi-wirable
- Mounting: 4 threaded mounting points conforming to industry standard square pattern, 127 x 70 mm (5 x 2.75 in) center to center. M6 metric thread.
- Baffle Construction: Injection molded structural ABS
- Enclosure Construction: 19 mm (3/4 in) MDF
- Net Weight: 20.4 kg (45 lb)
- Dimensions (WxHxD): 63.5 x 39.4 x 29.2 cm (25.0 x 15.5 x 11.5 in)