Product Overview
Bogen's X600 Black Max amplifiers are designed to provide maximum performance in constant voltage speaker systems. Dual 70V transformerless outputs deliver exceptionally clean audio to speaker systems requiring up to 1200 watts of total power, or two separate channels of audio up to 600W per zone, in a single package. High efficiency class H amplifier design and auto-sleep feature reduce power consumption on continuously-powered systems. Rear-mounted volume controls, independent low-cut filters on each input, and pluggable input terminal strips were specifically designed for the fixed install market. Built-in power sequencing for controlling multiple Black Max amplifiers combats current in-rush problems of large audio systems. Massive power toroid and heat sinks; heavy 14-gauge chassis; Back-Slope™ AC voltage stabilization; clip limiters; and DC voltage, over-current, and thermal protection circuits make this a workhorse amplifier.
Bogen Communications X600 Features:
- Dual 70V amplifier channels
- 3 power levels: 600W, 450W, or 300W per channel for 70V speaker systems
- Low noise, low distortion, and high slew rate
- High efficiency class H amplifier design
- Transformerless direct drive outputs
- Electronically balanced high-impedance inputs
- Pluggable terminal strips for input connections
- Independent low-cut filters on each input
- Built-in power sequencing for multiple Black Max amplifier installations
- Pluggable terminal strip for sequencing wiring
- Rear-mounted power sequencing status indicator
- DC, overload, short circuit, and thermal protection circuits
- Dual 70V amplifier channels
- 3 power levels: 600W, 450W, or 300W per channel for 70V speaker systems
- Low noise, low distortion, and high slew rate
- High efficiency class H amplifier design
- Transformerless direct drive outputs
- Electronically balanced high-impedance inputs
- Pluggable terminal strips for input connections
- Independent low-cut filters on each input
- Built-in power sequencing for multiple Black Max amplifier installations
- Pluggable terminal strip for sequencing wiring
- Rear-mounted power sequencing status indicator
- DC, overload, short circuit, and thermal protection circuits
Bogen Communications X600 Specifications:
- Power Output: 600W per channel @ 70V
- Input Sensitivity: 1V
- S/N Ratio (20k BW): 104 dB ref. 70V, F.P.
- Class of Operation: H
- Weight: 46 lbs
- Connectors:
- Power: 20A line cord
- Input: Pluggable 3-pin terminal strips
- Output: 5-pin "touch-proof" Barrier Strip
- Power Bandwidth: 20-40kHz .5% THD
- THD @ 1kHz rated power: less than .02%
- Rated Load Impedance (per ch): 8 ohms
- Frequency Response @ 1 watt: 20-20kHz +/-0.25dB
- Output Regulation, 1kHz direct: 1.5 dB @ 70V
- Inputs: 10k ohm electronically balanced, 3-pin pluggable terminal strip
- Low-Cut Filter: 60Hz, 2nd order roll-off, switch defeatable per channel
- AC Input Voltage Range: 95-130V AC, 60Hz
- Maximum AC Current: 20A
- Indicators: Status, Signal, Limit, AC Power Status (rear)
- Temperature Range: 15° to 105°F
- Cooling: Dual Forced Air Variable Speed Fan
- Dimensions (W x H x D): 17" x 3 1/2" x 16" (without rack mount brackets attached)
- Protection: RF, DC, Low-frequency, Thermal, Low-Impedance, Short Circuit,Circuit-Breaker, Clip Limiting
- Special Features: Sequential Turn-On Circuitry (defeatable), Sleep Mode (defeatable), Back-Slope AC voltage regulation, Toroidal Power Transformer
