(0)

Questions? Call Us:
866-334-8859

Radio Design Labs ST-GSP1
Gated Speech Preamplifier

OUR PART #  STGSP1

Our Price: $131.06
List Price: $175.32
You save 25%! (Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

Recommended Accessories

Radio Design Labs' ST-GSP1 is part of a group of products in the STICK-ON series from Radio Design Labs. The durable bottom adhesive permits quick, permanent mounting nearly anywhere or it may be used with RDL's racking accessories. The ST-GSP1 offers the ultimate in totally solid-state automatic mic switching, with a big plus, you can put it right where you need it!

The ST-GSP1 is a gated-speech preamplifier designed to be used in a variety of situations where it is desired to produce an automatically switched line-level signal from a microphone. This module may be used in conjunction with other RDL modules to configure automatic mixing systems or may be used alone as a voice-operated module. The open-collector output may be used to trigger other equipment or RDL modules. The versatility of ST-GSP1 applications range from complete automatic mixing system design to the addition of automatic mic gating to the inputs of conventional mixers or amplifiers.

NOTE: Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product.  Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

The mic input may be wired for balanced or unbalanced operation. A phantom voltage terminal is provided for use with condenser microphones. The phantom inputs accept dc voltages up to 48 Vdc and is internally filtered. Most microphones may run from the same 24 Vdc supply as the ST-GSP1. The audio output may also be wired balanced or unbalanced. Two LED indicators are provided for adjustment. One LED indicates the correct gain setting. The second indicator shows when the module is switched ON. Gain and threshold levels are adjusted using multi-turn precision trimmers.

The mic input gain adjustment has sufficient range to accommodate a wide range of microphones, from low-output dynamic microphones to higher-output condensers. The threshold adjustment permits setting the audio level at which the preamplifier output turns ON. Internal switching is solid-state and uses a soft-switch transition that sounds instantaneous without annoying clicks or edge transitions. The module will mute 2 seconds after the audio level drops below the preset threshold level. In circumstances where a longer delay time is desired, an external capacitor may be connected to extend the delay.

A proprietary RDL circuit provides noise reduction whenever the mic is active. This circuit suppresses ambient noise that permits higher audio levels before feedback and minimizes the audible open-mic effect during the 2 second off delay.

Stick-On Mounting Rack for 10 UnitsRadio Design Labs SR-10 Stick-On Mounting Rack for 10 Units

Radio Design Labs' STR-10 Racking System holds up to 10 STICK-ON units.  It holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or the top (depending on where the adjustment is located on ...

In Stock

Free Shipping Available

Our Price:$64.12List Price: $85.76You save 25%!

24 VDC 500mA Switching Power SupplyRadio Design Labs PS-24AS 24 VDC 500mA Switching Power Supply

Radio Design Labs' PS-24AS is a 24 Vdc switching power supply with a North American AC plug.  500 mA, dc plug.Specifications: Input: 100 to 240 VACOutput: 24 Vdc, 500 mA (UL, CSA)Dimensions: 1.65" x 2.75" x 1.45" (4.2 x 7 x 3.7 ...

In Stock

Our Price:$22.93List Price: $30.67You save 25%!

Din Rail Adaptor for STICK-ON Radio Design Labs DRA-35S Din Rail Adaptor for STICK-ON

The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module. The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a single DIN rail. Access to ...

In Stock

Our Price:$19.02List Price: $22.44You save 15%!

Kit to Mount ST, TX Series Modules on FP PanelRadio Design Labs MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel

TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track.

In Stock

Our Price:$5.01List Price: $6.70You save 25%!

Mounting Kit for STICK-ON, TX, or Rack-Up moduleRadio Design Labs MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.

In Stock

Our Price:$3.39List Price: $4.00You save 15%!

Rackmount Kit for 10 Stick-On UnitsRadio Design Labs STR-19B Rackmount Kit for 10 Stick-On Units

Radio Design Labs' STR-19B Racking System holds up to 10 STICK-ON unitss in a 19 inch rack and only occupies two rack spaces. The STR-19B holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$159.34List Price: $213.14You save 25%!

Rackmount System for 12 Stick-On UnitsRadio Design Labs STR-19A Rackmount System for 12 Stick-On Units

Radio Design Labs' STR-19A Racking System holds up to 12 STICK-ONs in a 19" rack and only occupies two rack spaces.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$134.02List Price: $179.28You save 25%!

Single RACK-UP Mounting Bay Utility ChassisRadio Design Labs UC-1 Single RACK-UP Mounting Bay Utility Chassis

Radio Design Labs' UC-1 is an ULTRASTYLE design tabletop chassis for mounting RDL modules and accessories. The front panel features a single RACK-UP mounting bay. The rear panel has an identical mounting bay and is supplied with matching ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$84.01List Price: $112.37You save 25%!

Mounting Frame for Stick/TXRadio Design Labs SR-4 Mounting Frame for Stick/TX

Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$83.21List Price: $111.30You save 25%!

STICK-ON Series 19"W Mounting Rack for up to12 ModulesRadio Design Labs SR-12A STICK-ON Series 19"W Mounting Rack for up to12 Modules

Radio Design Labs' SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$64.12List Price: $85.76You save 25%!

Mounting Strip for STICK-ON UnitsRadio Design Labs Smk 12 Mounting Strip for STICK-ON Units

The SMK-12 allows removable surface (up to 6 units) or edge (typically 12, max. 16) mounting of STICK-ON units. They can be fastened to its surface using screws or adhesive foam pads.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$27.45List Price: $36.72You save 25%!

Detachable Terminal BlockRadio Design Labs Dtb Rdl Detachable Terminal Block

Use DTB's to quickly detach and reattach wiring harness to STICK-ON units.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$6.77List Price: $8.00You save 15%!

Click to download

Radio Design Labs ST-GSP1
Gated Speech Preamplifier

OUR PART #  STGSP1

Product Information:

Radio Design Labs' ST-GSP1 is part of a group of products in the STICK-ON series from Radio Design Labs. The durable bottom adhesive permits quick, permanent mounting nearly anywhere or it may be used with RDL's racking accessories. The ST-GSP1 offers the ultimate in totally solid-state automatic mic switching, with a big plus, you can put it right where you need it!

The ST-GSP1 is a gated-speech preamplifier designed to be used in a variety of situations where it is desired to produce an automatically switched line-level signal from a microphone. This module may be used in conjunction with other RDL modules to configure automatic mixing systems or may be used alone as a voice-operated module. The open-collector output may be used to trigger other equipment or RDL modules. The versatility of ST-GSP1 applications range from complete automatic mixing system design to the addition of automatic mic gating to the inputs of conventional mixers or amplifiers.

NOTE: Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product.  Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

The mic input may be wired for balanced or unbalanced operation. A phantom voltage terminal is provided for use with condenser microphones. The phantom inputs accept dc voltages up to 48 Vdc and is internally filtered. Most microphones may run from the same 24 Vdc supply as the ST-GSP1. The audio output may also be wired balanced or unbalanced. Two LED indicators are provided for adjustment. One LED indicates the correct gain setting. The second indicator shows when the module is switched ON. Gain and threshold levels are adjusted using multi-turn precision trimmers.

The mic input gain adjustment has sufficient range to accommodate a wide range of microphones, from low-output dynamic microphones to higher-output condensers. The threshold adjustment permits setting the audio level at which the preamplifier output turns ON. Internal switching is solid-state and uses a soft-switch transition that sounds instantaneous without annoying clicks or edge transitions. The module will mute 2 seconds after the audio level drops below the preset threshold level. In circumstances where a longer delay time is desired, an external capacitor may be connected to extend the delay.

A proprietary RDL circuit provides noise reduction whenever the mic is active. This circuit suppresses ambient noise that permits higher audio levels before feedback and minimizes the audible open-mic effect during the 2 second off delay.

Stick-On Mounting Rack for 10 UnitsRadio Design Labs SR-10 Stick-On Mounting Rack for 10 Units

Radio Design Labs' STR-10 Racking System holds up to 10 STICK-ON units.  It holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or the top (depending on where the adjustment is located on ...

In Stock

Free Shipping Available

Our Price:$64.12List Price: $85.76You save 25%!

24 VDC 500mA Switching Power SupplyRadio Design Labs PS-24AS 24 VDC 500mA Switching Power Supply

Radio Design Labs' PS-24AS is a 24 Vdc switching power supply with a North American AC plug.  500 mA, dc plug.Specifications: Input: 100 to 240 VACOutput: 24 Vdc, 500 mA (UL, CSA)Dimensions: 1.65" x 2.75" x 1.45" (4.2 x 7 x 3.7 ...

In Stock

Our Price:$22.93List Price: $30.67You save 25%!

Din Rail Adaptor for STICK-ON Radio Design Labs DRA-35S Din Rail Adaptor for STICK-ON

The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module. The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a single DIN rail. Access to ...

In Stock

Our Price:$19.02List Price: $22.44You save 15%!

Kit to Mount ST, TX Series Modules on FP PanelRadio Design Labs MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel

TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track.

In Stock

Our Price:$5.01List Price: $6.70You save 25%!

Mounting Kit for STICK-ON, TX, or Rack-Up moduleRadio Design Labs MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.

In Stock

Our Price:$3.39List Price: $4.00You save 15%!

Rackmount Kit for 10 Stick-On UnitsRadio Design Labs STR-19B Rackmount Kit for 10 Stick-On Units

Radio Design Labs' STR-19B Racking System holds up to 10 STICK-ON unitss in a 19 inch rack and only occupies two rack spaces. The STR-19B holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$159.34List Price: $213.14You save 25%!

Rackmount System for 12 Stick-On UnitsRadio Design Labs STR-19A Rackmount System for 12 Stick-On Units

Radio Design Labs' STR-19A Racking System holds up to 12 STICK-ONs in a 19" rack and only occupies two rack spaces.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$134.02List Price: $179.28You save 25%!

Single RACK-UP Mounting Bay Utility ChassisRadio Design Labs UC-1 Single RACK-UP Mounting Bay Utility Chassis

Radio Design Labs' UC-1 is an ULTRASTYLE design tabletop chassis for mounting RDL modules and accessories. The front panel features a single RACK-UP mounting bay. The rear panel has an identical mounting bay and is supplied with matching ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$84.01List Price: $112.37You save 25%!

Mounting Frame for Stick/TXRadio Design Labs SR-4 Mounting Frame for Stick/TX

Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$83.21List Price: $111.30You save 25%!

STICK-ON Series 19"W Mounting Rack for up to12 ModulesRadio Design Labs SR-12A STICK-ON Series 19"W Mounting Rack for up to12 Modules

Radio Design Labs' SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$64.12List Price: $85.76You save 25%!

Mounting Strip for STICK-ON UnitsRadio Design Labs Smk 12 Mounting Strip for STICK-ON Units

The SMK-12 allows removable surface (up to 6 units) or edge (typically 12, max. 16) mounting of STICK-ON units. They can be fastened to its surface using screws or adhesive foam pads.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$27.45List Price: $36.72You save 25%!

Detachable Terminal BlockRadio Design Labs Dtb Rdl Detachable Terminal Block

Use DTB's to quickly detach and reattach wiring harness to STICK-ON units.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$6.77List Price: $8.00You save 15%!

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.