Electro-Voice EVID 6.2TW 2-Way Twin 6" Woofer and 1" Tweeter, Pair, White

The Electro-Voice EVID 6.2 is an extended-range loudspeaker ideal for indoor and outdoor applications requiring high-quality sound. Its extended range and smooth bass provide ample SPL levels in larger environments such as shopping malls, sports bars, health clubs, and so on.

The 6.2’s three-dimensional elliptic baffle symmetrically locates the 1” Ti direct radiator high-frequency element with a Coherent Coverage Waveguide in front of and between the 6” low-frequency drivers. The careful shaping, location, and 10° splaying of the LF units provide coverage control by the resulting line array. Lobing is controlled by physically “shadowing” the LF transducers from each other over the bandwidth where they would normally exhibit interference. EVID’s mounting system provides greater range of aiming angles in both horizontal and vertical planes than other types. The curved grille features designed-in weather resistance and a hidden leash for safety.

Electro-Voice EVID 6.2TW Features:

• Line-array enhanced coverage control
• Organic, unobtrusive shape
• Strong-Arm-Mount™ for easy, flexible aiming
• Full-bandwidth overload protection
• Weather resistant - Conforms to Mil Spec 810 and IEC 529 IP 34
• Dual 6-inch LF transducers for extended bass and greater power handling and output
• Ti direct-radiator HF transducer, Neodymium structure
• High sensitivity
• Magnetically shielded
• Zinc-plated grilles
• Transformer Versions

Electro-Voice EVID 6.2TW Specifications:

• Frequency Response (-10 dB): 62 Hz - 20 kHz
• Power Handling: 300W Cont. Prog./600W Peak
• Sensitivity: 94 dB, 1W/1m
• Impedance: 8 ohms
• Max SPL: 118 dB
• Horizontal Coverage: 100°
• Vertical Coverage: 80°
• Crossover Frequency: 1.6 kHz
• LF Transducer: 2 x 6” (100 mm)
• HF Transducer: 1” (25 mm)
• Protection: Full System
• Weather Resistance: Meets Mil Spec 810 humidity, salt spray, temperature and UV, and IEC 529 IP 34 splash-proof ratings
• Swing x Rotation: 100° x 90°
• Terminals: Phoenix Connector
• Enclosure Material: ABS (paintable)
• “t” Version Wattage Taps:
  • 70V: 7.5 W
  • 70V/100V:15W, 30W, 60W, 8 ohm bypass
• Dim (H x W x D): 16.5” x 9" x 11.75” (419 mm x 228 mm x 298 mm)
• Net Weight (each): 12 lbs (5.3kg)
• Shipping Weight (pair): 27 lbs (12.3 kg)
• Included Accessories: SAM, hex key

NOTE:

Image shown above is for illustrative purposes only; actual product comes in White. For more information on this and other products, contact your Sales Representative.