Sennheiser SZI 30 Complete System Package

The SZI 30 is a small area radiator/emitter which can be fed modulated signals from an SI 30 or any other wideband modulator. It has no charging compartments; the LED on the right of the front panel serves as a power indicator instead, showing that a supply voltage is present. At the back of the SZI 30 you have—besides the DC input connector—two RF sockets. If no plug is connected to the output socket, a 50 Ω terminating impedance is switched into the RF connection.

Features

• Works with any modulator
• Easy to install
• Master system can be used independently for up to 750 sq. ft. of coverage
• SZI 30 slave emitters offer increased coverage
• Connects to line level audio source via 1/8" or 1/4" plug unbalanced
• 1-year warranty

Specifications

• Nominal deviation: ± 50 kHz
• Carrier frequencies: max. 6 MHz
• AF frequency response: depends on modulator
• THD (1 kHz, nom. dev.): = 1 %
• AF signal-to-noise ratio: = 60 dB(A) rms
• RF input–RF output: 1/8" mono jack with a 50 Ω term. impedance
• Output impedance: approx. 20 k Ω or 50 Ω
• IR diodes: 11
• Max. coverage area approx.: 750 sq. ft., single-ch./ 375 sq.ft. in two channels
• Radiating power approx.: 0.5 W
• Operating voltage: 24–27 V DC via 2-pin Texas socket
• Current consumption: approx. 150 mA
• Dimensions in mm: approx. 4.64 x .98 x 3.54
• Weight: approx. 4.76 oz

NOTE:

Power supply is not included. Please order as required.