Philmore HDPC15B 15-Pin Crimp-Style D-Sub Male Connector (Not Packaged)

Higher density permits more circuits in the same size shell as D-Subs - about an increase of 60%. Pins are supplied separately. Crimp pins are crimped onto 22 or 24 AWG wire and then inserted into shell body, snapping in place. Shells are steel, insulator is glass-fiber reinforced plastic (UL94V-0).

Specifications:

• Current rating: 5 amps
• Contact Resistance max: 10 milliohms
• Insulation Resistance: 500 megaohms

NOTE:

In lieu of an available picture for the male D-sub shell, the female version has been pictured above.