Questions? Call Us:

Ashly MX206
Stereo Mixer

OUR PART #:  MX206

Designed to be used by itself or as a supplement to larger mixing consoles, the MX-206 from Ashly provides superior audio performance in a single rack-space package.
Learn More
Our Price: $600.00
List Price: $750.00
You save 20%!
Write the first review.
Ashly MX206
In Stock

Related Products

Designed to be used by itself or as a supplement to larger mixing consoles, the MX-206 from Ashly provides superior audio performance in a single rack-space package. Equally at home in either fixed or portable installations, the MX-206 may be used anywhere where additional microphone inputs are needed. Typical applications include live sound reinforcement, broadcast, recording, and film/video production.

The Ashly MX-206 is a rack-mountable six input channel stereo microphone mixer offering up to 84 dB of gain for distant mic placements or extremely low-level signals. Ultra low-noise, studio-grade integrated mic preamps are utilized. Each channel has a switchable 20 dB pad, a three-position sensitivity switch to handle microphones with different input sensitivities, and 48 V phantom power may be switched in for use by condenser mics. Every input has its own peak LED indicator. A separate Aux In volume control adjusts line level sources, such as a CD player or tape deck connected to rear-panel RCA inputs. Since plenty of headroom has been designed into the MX-206, even the loudest signals can be handled without distortion.

Output is monitored via two 5-segment, multi-colored LED meters, along with separate Peak Clip Indicators. The transformer-isolated XLR balanced mono output is capable of driving +24dBu into 600 ohms, and a separate TRS 1/4" output may be used either balanced or unbalanced. An Aux output appears on RCA jacks.

The MX-206 provides superior audio performance in a rugged and durable package. Backed by Ashly's exclusive Five Year Worry-Free Warranty, the MX-206 is designed to provide many years of trouble-free operation.


  • High-gain mic preamps with very low noise and distortion
  • 48 Volt phantom power for use with any condenser microphones
  • Auxilliary Tape/CD Inputs and Outputs
  • Pan Control on Each Channel


  • HD at +20 dBu, 20Hz-20KHz, input switch at -40dB <0.05%
  • IMD (SMPTE) at +20dBu, input switch at -40dB <0.02%
  • HUM & NOISE (20Hz-20KHz , input switch at -60dB)
  • Equivalent input hum and noise <-127dBu
  • Residual output noise, TRS outputs, all levels at minimum <-100dBu
  • Residual output noise, XLR outputs <-90dBu
  • Master Level at nominal, all Ch. Level controls at min <-84dBu
  • Master Level and one Ch. Level at nom <-80dBuIMUM VOLTAGE GAIN (┬▒2dB)
  • Mic Input to Master Output, 600 ohm load <-84dB
  • Aux In to Master Output <-34dB
  • Frequency Response - 20Hz-20Khz +0/-0.5dB
  • Crosstalk - between any inputs or outputs 20Hz-20KHz <-60dB
  • VU METERS - Two 6-segment LED meters 0VU = +4dBu
  • Peak Clip indicator on each input channel and left and right outputs, illuminates 3dB below clipping
  • +48 VDC applied to all Mic Inputs, switchable on front panel.
  • Maximum total current draw = 80mA.
  • Maximum single channel current draw = 14mA.
  • Gradual power-up and down to eliminate "pops".
  • SHIPPING WEIGHT 13 lbs. Maximum
  • POWER REQUIREMENTS 100-240 Volts, 50-60 Hz, 30 watts
    19" wide x 1.75" high x 8.0" deep.

*Unless otherwise stated, specification conditions are: 150 ohm source, Input set at "-40", all
other controls set at nominal.

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information

© 2018 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.