(0)

Questions? Call Us:
866-334-8859

QSC CX602V
2-Channel Powered Amplifier, 400W, 70V Output

OUR PART #  CX602V

Our Price: $1,770.00
(Low Price Guarantee)
In Stock

Recommended Accessories

The all new CX Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three 70-volt direct models have been designed from the ground up, combining QSC's exclusive PowerWave technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and reliability, the CX Series is the ideal solution ot any permanently installed sound system.

The new CX amplifiers are equipped with many contractor-specific features including 1dB detented gain controls for easily repeatable settings and a custom security cover for tamper-proof installations. Active Inrush Limiting eliminates AC inrush current, cutting the need for power sequencers.

CXs also now include an HD-15 Data Port connector to interface with QSControl, QSC's computer-controlled audio system, that allows remote amplifier monitoring and control via a standard Ethernet network.

QSC CX602V Specifications:

  • Input Impedance: 6k ohms unbalanced, 12k ohms balanced
  • Input Connectors, each channel: 3-pin XLR & 3-pin detachable terminal blocks (1 each per channel)
  • Output Connectors, each channel: Safety-shrouded barrier strip
  • Amplifier Protection: Full short circuit, opencircuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads
  • Load Protection: On/Off muting, DC-fault power supply shutdown
  • Dimensions (W x H x D): 19" x 3.5" x 14" (2 RU)
  • Weight: 21 lbs net
  • Power:
    • 8 ohms, Stereo Mode, Both Channels Driven: 550W
    • 70V, Stereo Mode, Both Channels Driven, 20Hz-20kHz,0.05% THD: 400W
    • 70V, Stereo Mode, Both Channels Driven, 1kHz, 0.05%THD: 440W
    • 70V, Stereo Mode, Both Channels Driven, 1kHz, 1% THD:600W
    • 16 ohms Bridged Mono Mode: 1100W
    • 140V, Bridged Mono Mode, 20Hz-20kHz, 0.1% THD: 800W
    • 140V, Bridged Mono Mode, 1kHz, 0.05% THD: 880W
    • 140V, Bridged Mono Mode, 1kHz, 1% THD: 1200W
Digital Signal Processing Module for QSC AmplifiersQSC DSP4 Digital Signal Processing Module for QSC Amplifiers

With more than three decades of experience pioneering cutting edge audio products, QSC raises the bar once again with the DSP-4 Digital Signal Processing Module. This compact module offers two channels of independent DSP and attaches to ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$730.00

Crossover Module/CX1102QSC XC-3 Crossover Module/CX1102

The XC-3 is an active two-way crossover for use with bi-amplified loudspeakers. The unit mounts to the rear panel of a two-channel DCA, CX, or ISA amplifiers to save cost and rack space. The amplifier's DataPort provides the accessory's ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$230.00

Remote Rack Mounting Bracket for DSP-3 & DSP-4QSC DPX4 Remote Rack Mounting Bracket for DSP-3 & DSP-4

The DPX-4 allows remote rack mounting of QSC DataPort-compatible accessory modules such as the DSP-3 and DSP-4 digital signal processors. The bracket allows accessory modules to be used in a standalone configuration with QSC four-channel, ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$90.00

QSC CX602V
2-Channel Powered Amplifier, 400W, 70V Output

OUR PART #  CX602V

Product Information:

The all new CX Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three 70-volt direct models have been designed from the ground up, combining QSC's exclusive PowerWave technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and reliability, the CX Series is the ideal solution ot any permanently installed sound system.

The new CX amplifiers are equipped with many contractor-specific features including 1dB detented gain controls for easily repeatable settings and a custom security cover for tamper-proof installations. Active Inrush Limiting eliminates AC inrush current, cutting the need for power sequencers.

CXs also now include an HD-15 Data Port connector to interface with QSControl, QSC's computer-controlled audio system, that allows remote amplifier monitoring and control via a standard Ethernet network.

QSC CX602V Specifications:

  • Input Impedance: 6k ohms unbalanced, 12k ohms balanced
  • Input Connectors, each channel: 3-pin XLR & 3-pin detachable terminal blocks (1 each per channel)
  • Output Connectors, each channel: Safety-shrouded barrier strip
  • Amplifier Protection: Full short circuit, opencircuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads
  • Load Protection: On/Off muting, DC-fault power supply shutdown
  • Dimensions (W x H x D): 19" x 3.5" x 14" (2 RU)
  • Weight: 21 lbs net
  • Power:
    • 8 ohms, Stereo Mode, Both Channels Driven: 550W
    • 70V, Stereo Mode, Both Channels Driven, 20Hz-20kHz,0.05% THD: 400W
    • 70V, Stereo Mode, Both Channels Driven, 1kHz, 0.05%THD: 440W
    • 70V, Stereo Mode, Both Channels Driven, 1kHz, 1% THD:600W
    • 16 ohms Bridged Mono Mode: 1100W
    • 140V, Bridged Mono Mode, 20Hz-20kHz, 0.1% THD: 800W
    • 140V, Bridged Mono Mode, 1kHz, 0.05% THD: 880W
    • 140V, Bridged Mono Mode, 1kHz, 1% THD: 1200W
Digital Signal Processing Module for QSC AmplifiersQSC DSP4 Digital Signal Processing Module for QSC Amplifiers

With more than three decades of experience pioneering cutting edge audio products, QSC raises the bar once again with the DSP-4 Digital Signal Processing Module. This compact module offers two channels of independent DSP and attaches to ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$730.00

Crossover Module/CX1102QSC XC-3 Crossover Module/CX1102

The XC-3 is an active two-way crossover for use with bi-amplified loudspeakers. The unit mounts to the rear panel of a two-channel DCA, CX, or ISA amplifiers to save cost and rack space. The amplifier's DataPort provides the accessory's ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$230.00

Remote Rack Mounting Bracket for DSP-3 & DSP-4QSC DPX4 Remote Rack Mounting Bracket for DSP-3 & DSP-4

The DPX-4 allows remote rack mounting of QSC DataPort-compatible accessory modules such as the DSP-3 and DSP-4 digital signal processors. The bracket allows accessory modules to be used in a standalone configuration with QSC four-channel, ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$90.00

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.